EN 1011-4:2000/A1:2003

Current

Current The latest, up-to-date edition.

WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS

Available format(s):

Language(s):

Published date: 10-12-2003

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Provision of quality requirements
5 Parent metal
6 Factors affecting properties of welded structures
   and assemblies
7 Fusion welding processes
8 Welding consumables
9 Equipment
10 Joint types
11 Backing material
12 Branch connections
13 Gouging
14 Preparation of joint
15 Assembly for welding
16 Alignment of joints
17 Preheat
18 Interpass temperature
19 Methods of temperature measurement
20 Additional recommendations
Annex A (informative) Detrimental effects on weld properties
                       and measures for their avoidance
Annex B (informative) Recommendations for the choice of
                       consumables
Annex ZA (informative) Clauses of this European Standard
                       addressing essential requirements or
                       other provisions of EU Directives

Abstract - (Show below) - (Hide below)

Gives general recommendations for manual, mechanized and automatic fusion welding of cast and wrought aluminium alloys and combinations thereof.

General Product Information - (Show below) - (Hide below)

Committee	TC 121
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
PN EN 1011-4 : 2002 AMD 1 2005	Identical
NF EN 1011-4 : 2000 AMD 1 2004	Identical
UNE-EN 1011-4:2001	Identical
I.S. EN 1011-4:2000	Identical
NS EN 1011-4 : 2001 AMD 1 2004	Identical
UNI EN 1011-4 : 2005	Identical
SN EN 1011-4 : 2000 AMD 1 2004	Identical
NEN EN 1011-4 : 2000 AMD 1 2004	Identical
BS EN 1011-4:2000	Identical
NBN EN 1011-4 : 2001 AMD 1 2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNE-EN 13195:2014	Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
UNI EN 1090-3 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
06/30146290 DC : 0	EN 4632-2 - AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 2: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
DIN EN 13195:2013-12	ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
04/30125238 DC : DRAFT NOV 2004	EN 15085-3 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
I.S. ENV 1999-2:1998	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 2: STRUCTURES SUSCEPTIBLE TO FATIGUE
ONORM EN 1090-3 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN 1090-3:2008-09	EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
UNI EN 1090-1 : 2012	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
BS EN 1090-3:2008	Execution of steel structures and aluminium structures Technical requirements for aluminium structures
BS EN 13480-8:2017+A1:2019	Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 13480-8:2017	Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
DIN EN 13981-1:2003-11	ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 1: EXTRUDED PRODUCTS
BS EN 13981-4:2006	Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Forgings
EN 50374:2004	Conductor cars
EN 15085-3:2007/AC:2009	RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
EN 13195:2013	Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
EN 1090-1:2009+A1:2011	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
EN 1011-1:2009	Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
EN 13195-1 : 2002	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
I.S. EN 15085-3:2007	RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
PREN 1090-3 : DRAFT 2017	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
UNI EN 13195 : 2013	ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
BS EN 1090-1 : 2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
UNE-EN 1090-1:2011	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
04/30050372 DC : DRAFT JUN 2004	EN 13981-3 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 3: CASTINGS
UNE-EN 13480-8:2017	Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)
PREN 4632-002 : 200P1	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 1999-1-1 : 2007	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
I.S. EN 1999-1-1:2007	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
NF EN 4632-002 : 2008	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
DIN EN 1011-1:2009-07	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
DIN EN 13981-2:2004-10	Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets
DIN EN 13981-3:2006-12	Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings
I.S. EN 1011-1:2009	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
I.S. EN 13195-1:2002	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 13480-8:2017&LC:2019	METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
UNI EN 15085-3 : 2008	RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS
DIN EN 1999-1-1:2014-03	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
12/30260023 DC : 0	BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
07/30158903 DC : 0	BS EN 1011-1 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
I.S. EN 13195:2013	ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
04/30125241 DC : DRAFT NOV 2004	EN 15085-4 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
I.S. EN 50374:2004	CONDUCTOR CARS
I.S. EN 1090-3:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
PREN 13480-8 : DRAFT 2012	METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
EN 1090-3:2008	Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
DIN EN 15085-3:2010-01	Railway applications - Welding of railway vehicles and components - Part 3: Design requirements
DIN EN 13981-4:2007-02	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings
BS EN 15085-3:2007	Railway applications. Welding of railway vehicles and components Design requirements
BS EN 13195-1:2002	Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications
BS EN 40-6:2002	Lighting columns Requirements for aluminium lighting columns
EN 14532-3:2004	Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
EN 1999-1-1:2007/A2:2013	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
UNI EN 1011-1 : 2009	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 1: GENERAL GUIDANCE FOR ARC WELDING
UNI EN 12899-1 : 2008	FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
CEI EN 50374 : 2005	CONDUCTOR CARS
UNI EN 1999-1-1 : 2014	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
BS EN 4632-002:2008	Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys
04/30050376 DC : DRAFT AUG 2004	EN 13981-4 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 4: FORGINGS
DD ENV 1999-2:2000	Eurocode 9. Design of aluminium structures Structures susceptible to fatigue
04/30125235 DC : DRAFT NOV 2004	EN 15085-2 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 2: QUALITY REQUIREMENTS AND CERTIFICATION OF WELDING MANUFACTURER
S.R. CWA 16221:2010	VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION
17/30348949 DC : 0	BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN 14532-3:2005-02	WELDING CONSUMABLES - TEST METHODS AND QUALITY REQUIREMENTS - PART 3: CONFORMITY ASSESSMENT OF WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM ALLOYS
BS EN 1011-1:2009	Welding. Recommendations for welding of metallic materials General guidance for arc welding
BS EN 13981-2:2004	Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Plates and sheets
BS EN 14532-3:2004	Welding consumables. Test methods and quality requirements Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
BS EN 13981-3:2006	Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings
EN 13981-2:2004	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 2: Plates and sheets
EN 13981-4:2006	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings
EN 13981-3:2006	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings
EN 4632-002:2008	Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
EN 40-6:2002	Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 13981-1:2003	Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 1: Extruded products
EN 13480-8:2017	Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
BS EN 13195:2013	Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
NFL 06 380-20 : 2003	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 20: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 50374:2004	Conductor cars
I.S. EN 1090-1:2009	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS
UNE-EN 1090-3:2011	Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
I.S. EN 4632-002:2008	AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 13981-1:2003	Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Extruded products
DIN EN 13195-1:2002-11	ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
DIN EN 1090-1:2012-02	Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components (includes Amendment A1:2011)

Standards Referencing This Book - (Show below) - (Hide below)

EN 1780-1:2002	Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system
EN ISO 6520-1:2007	Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN 1780-3:2002	Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition
EN 729-2 : 1994	QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - COMPREHENSIVE QUALITY REQUIREMENTS
EN 439 : 1994	WELDING CONSUMABLES - SHIELDING GASES FOR ARC WELDING AND CUTTING
EN 30042 : 1994	ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
EN 288-1:1992/A1:1997	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES FOR FUSION WELDING
EN 573-2:1994	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
CR ISO 15608 : 2000	WELDING - GUIDELINES FOR A METALLIC MATERIAL GROUPING SYSTEM
EN 288-4:1992/A1:1997	SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURES FOR THE ARC WELDING OF ALUMINIUM AND ITS ALLOYS
EN 719 : 1994	WELDING COORDINATION - TASKS AND RESPONSIBILITIES
EN 1780-2:2002	Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system
EN ISO 6947:2011	Welding and allied processes - Welding positions (ISO 6947:2011)
EN 1011-1:2009	Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
EN ISO 4063:2010	Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN 288-2:1992/A1:1997	SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - PART 2: WELDING PROCEDURE SPECIFICATION FOR ARC WELDING
EN 287-2:1992/A1:1997	APPROVAL TESTING OF WELDERS - FUSION WELDING - ALUMINIUM AND ALUMINIUM ALLOYS
EN 1706:2010	Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 1289:1998/A2:2003	NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS
EN 573-4:2004	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products
EN 1418:1997	Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 729-3 : 1994	QUALITY REQUIREMENTS FOR WELDING - FUSION WELDING OF METALLIC MATERIALS - STANDARD QUALITY REQUIREMENTS
EN 573-3:2013	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
EN 573-1:2004	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart