PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
UNE-EN 846-14:2013
|
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
BS EN 1052-3:2002
|
Methods of test for masonry Determination of initial shear strength |
BS EN 846-8:2000
|
Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of joist hangers |
BS EN 998-1:2016
|
Specification for mortar for masonry Rendering and plastering mortar |
BS EN 13294:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time |
EN 13294:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
EN 1052-4:2000
|
Methods of test for masonry - Part 4: Determination of shear strength including damp proof course |
EN 13057:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
EN 1052-5:2005
|
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
EN 1052-2:2016/AC:2017
|
METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
EN 1015-6:1998/A1:2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 6: DETERMINATION OF BULK DENSITY OF FRESH MORTAR |
10/30212141 DC : 0
|
BS EN 846-14 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: LINTELS |
UNI EN 846-14 : 2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
01/102985 DC : DRAFT MAR 2001
|
PREN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
02/102876 DC : DRAFT APR 2002
|
PREN 1052-5 - METHODS OF TEST FOR MASONRY - PART 5: DETERMINATION OF BOND STRENGTH BY THE BOND WRENCH METHOD |
DIN EN 934-3:2012-09
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling (includes Amendment A1:2012) |
DIN EN 480-13:2015-08
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 13: REFERENCE MASONRY MORTAR FOR TESTING MORTAR ADMIXTURES |
BS EN 1052-5:2005
|
Methods of test for masonry Determination of bond strength by the bond wrench method |
DIN EN 1052-5:2005-06
|
Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method |
DIN EN 1052-3:2007-06
|
Methods of test for masonry - Part 3: Determination of initial shear strength (includes Amendment A1:2007) |
I.S. EN 846-7:2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
I.S. EN 480-13:2015
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 13: REFERENCE MASONRY MORTAR FOR TESTING MORTAR ADMIXTURES |
DIN EN 13294:2002-09
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF STIFFENING TIME |
I.S. EN 1052-2:2016
|
METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
DIN EN 1015-6:2007-05
|
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar (includes Amendment A1:2006) |
I.S. EN 998-1:2016
|
SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
I.S. EN 998-2:2016
|
SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR |
I.S. EN 846-5:2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
DIN EN 1052-2:2016-08
|
METHODS OF TEST FOR MASONRY - PART 2: DETERMINATION OF FLEXURAL STRENGTH |
I.S. EN 934-3:2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
DIN EN 846-14:2012-11
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
09/30180272 DC : 0
|
BS EN 934-3 - ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY, MARKING AND LABELLING |
BS EN 1052-4:2000
|
Methods of test for masonry Determination of shear strength including damp proof course |
UNE-EN 480-13:2015
|
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
UNE-EN 846-5:2013
|
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
UNI EN 846-7 : 2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
UNI EN 846-5 : 2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
UNI EN 1052-4 : 2001
|
METHODS OF TEST FOR MASONRY - DETERMINATION OF SHEAR STRENGTH INCLUDING DAMP PROOF COURSE |
UNI EN 934-3 : 2012
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
BS EN 846-14:2012
|
Methods of test for ancillary components for masonry Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
02/713774 DC : DRAFT DEC 2002
|
EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
PREN 846-5 : DRAFT 2010
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
10/30212138 DC : 0
|
BS EN 846-7 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
10/30211862 DC : 0
|
BS EN 998-1 - SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
10/30212132 DC : 0
|
BS EN 846-5 - METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
I.S. EN 846-14:2012
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 14: DETERMINATION OF THE INITIAL SHEAR STRENGTH BETWEEN THE PREFABRICATED PART OF A COMPOSITE LINTEL AND THE MASONRY ABOVE IT |
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
DIN EN 998-1:2015-11 (Draft)
|
SPECIFICATION FOR MORTAR FOR MASONRY - PART 1: RENDERING AND PLASTERING MORTAR |
BS EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion |
BS EN 1052-2:2016
|
Methods of test for masonry Determination of flexural strength |
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
BS EN 846-2:2000
|
Methods of test for ancillary components for masonry Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
BS EN 1015-6:1999
|
Methods of test for mortar for masonry Determination of bulk density of fresh mortar |
BS EN 13057:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
BS EN 846-5:2012
|
Methods of test for ancillary components for masonry Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
BS EN 934-3 : 2009
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
BS EN 846-7:2012
|
Methods of test for ancillary components for masonry Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
UNE-EN 846-7:2015
|
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
UNE-EN 998-2:2012
|
Specification for mortar for masonry - Part 2: Masonry mortar |
EN 998-1:2016
|
Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
EN 846-7:2012
|
Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) |
EN 934-3:2009+A1:2012
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling |
EN 846-5:2012
|
Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) |
EN 846-2:2000
|
Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints |
EN 998-2:2016
|
Specification for mortar for masonry - Part 2: Masonry mortar |
EN 480-13:2015
|
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
EN 846-14:2012
|
Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it |
EN 846-8:2000/A1:2006
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 8: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF JOIST HANGERS |
EN 846-4:2001/A1:2004
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 4: DETERMINATION OF LOAD CAPACITY AND LOAD-DEFLECTION CHARACTERISTICS OF STRAPS |
PREN 846-7 : DRAFT 2010
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
DIN EN 998-2:2015-11 (Draft)
|
SPECIFICATION FOR MORTAR FOR MASONRY - PART 2: MASONRY MORTAR |
BS EN 480-13:2015
|
Admixtures for concrete, mortar and grout. Test methods Reference masonry mortar for testing mortar admixtures |
BS EN 846-4:2002
|
Methods of test for ancillary components for masonry Determination of load capacity and load-deflection characteristics of straps |
DIN EN 846-7:2012-11
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 7: DETERMINATION OF SHEAR LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF SHEAR TIES AND SLIP TIES (COUPLET TEST FOR MORTAR JOINT CONNECTIONS) |
EN 1052-3:2002/A1:2007
|
METHODS OF TEST FOR MASONRY - PART 3: DETERMINATION OF INITIAL SHEAR STRENGTH |
DIN EN 846-4:2005-01
|
Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps |
DIN EN 846-5:2012-11
|
METHODS OF TEST FOR ANCILLARY COMPONENTS FOR MASONRY - PART 5: DETERMINATION OF TENSILE AND COMPRESSIVE LOAD CAPACITY AND LOAD DISPLACEMENT CHARACTERISTICS OF WALL TIES (COUPLET TEST) |
UNE-EN 934-3:2010
|
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling |