EN 10169:2010+A1:2012

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Continuously organic coated (coil coated) steel flat products - Technical delivery conditions

Available format(s):

Superseded date: 31-03-2022

Language(s):

Published date: 28-03-2012

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Information to be supplied by the purchaser
6 Requirements
7 Inspection
8 Marking
9 Packing and dispatch
10 Storage
Annex A (informative) - Types of ambience
Annex B (informative) - Coating materials
Annex C (informative) - Types of atmosphere
Annex D (informative) - Outdoor exposure sites
Annex E (informative) - Storage
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements. The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).NOTEThis document is not applicable to continuously organic coated flat products made of:-tinmill products,-electrical steels.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 9
Development Note	Supersedes EN 10169-1, EN 10169-2 and EN 10169-3. (11/2010) Supersedes PREN 10169. (04/2011) 2010 Edition Re-Issued in March 2012 & incorporates AMD 1 2012. (04/2012)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN 10169:2022
Supersedes	EN 10169-2:2006 EN 10169-3:2003 EN 10169-1:2003

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 10169 : 2010 + A1 2013	Identical
NBN EN 10169 : 2010 + A1 2012	Identical
NEN EN 10169 : 2010 + A1 2012	Identical
NS EN 10169 : 2010 + A1 2012	Identical
I.S. EN 10169:2010	Identical
PN EN 10169 : 2011 + A1 2012	Identical
SN EN 10169 : 2011 + A1 2012	Identical
UNI EN 10169 : 2012	Identical
BS EN 10169 : 2010	Identical
DIN EN 10169:2012-06	Identical
UNE-EN 10169:2011	Identical
UNE-EN 10169:2011+A1:2012	Identical
BS EN 10169:2010+A1:2012	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 13523-21 : DRAFT 2016	COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
UNI EN 13523-19 : 2011	COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
15/30329701 DC : 0	BS EN 13523-1 - COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
15/30329698 DC : 0	BS EN 13523-27 - COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
12/30268955 DC : 0	BS EN 13523-3 - COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
BS EN 13523-4:2014	Coil coated metals. Test methods Pencil hardness
FD CEN/TR 16239 : 2011 FD	INSTALLATION RULES OF FIBROUS (GYPSUM) PLASTER WORKS
13/30217369 DC : 0	BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
13/30277107 DC : 0	BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
UNI EN 13523-17 : 2012	COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
PREN 13523-13 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
12/30268970 DC : 0	BS EN 13523-25 - COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
15/30329707 DC : 0	BS EN 13523-22 - COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
PREN 13523-10 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
BS EN 16074:2011	Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials
DIN EN 13523-29:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
I.S. EN 13523-27:2017	COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
15/30320416 DC : 0	BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
14/30297831 DC : 0	BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
UNE-EN 13523-29:2017	Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
DIN EN 13523-15:2015-09	Coil coated metals - Test methods - Part 15: Metamerism
BS EN 13523-13:2014	Coil coated metals. Test methods Resistance to accelerated ageing by the use of heat
BS EN 13523-20:2011	Coil coated metals. Test methods Foam adhesion
BS EN 13523-2:2014	Coil coated metals. Test methods Gloss
BS EN 13523-8:2017	Coil coated metals. Test methods Resistance to salt spray (fog)
UNE-EN 505:2013	Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
UNE-EN 13523-25:2014	Coil coated metals - Test methods - Part 25: Resistance to humidity
BS EN 13523-24:2017	Coil coated metals. Test methods Resistance to blocking and pressure marking
BS EN 13523-11:2011	Coil coated metals. Test methods Resistance to solvents (rubbing test)
BS EN 13964:2014	Suspended ceilings. Requirements and test methods
UNI EN 13523-3 : 2014	COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
EN 13523-23:2015	Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
EN 13523-24:2017	Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
EN 13523-17:2011	Coil coated metals - Test methods - Part 17: Adhesion of strippable films
EN 13523-0:2014	Coil coated metals - Test methods - Part 0: General introduction
EN 13523-26:2014	Coil coated metals - Test methods - Part 26: Resistance to condensation of water
DIN EN 508-1:2000-12	ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 13523-5:2014	Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
EN 13523-9:2014	Coil coated metals - Test methods - Part 9: Resistance to water immersion
DIN EN 13523-22:2017-05	COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
DIN EN 13523-1:2017-05	COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
DIN EN 1090-2:2011-10	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 508-1 : 2014	ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
EN 13523-13:2014	Coil coated metals - Test methods - Part 13: Resistance to accelerated ageing by the use of heat
EN 13523-11:2011	Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
EN 13523-14:2014	Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
EN 13523-12:2017	Coil coated metals - Test methods - Part 12: Resistance to scratching
EN 13523-29:2017	Coil coated metals - Test methods - Part 29: Resistance to environmental soiling (Dirt pick-up and striping)
EN 13523-4:2014	Coil coated metals - Test methods - Part 4: Pencil hardness
EN 13523-8:2017	Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
12/30268952 DC : 0	BS EN 13523-0 - COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS
13/30277104 DC : 0	BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
13/30280395 DC : 0	BS EN 10346 - CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS
PREN 16951-2 : DRAFT 2016	RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
12/30268976 DC : 0	BS EN 13523-4 - COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
12/30268967 DC : 0	BS EN 13523-14 - COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
I.S. EN 13523-29:2017	COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
DIN EN 13523-4:2014-10	COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
UNE-EN 13523-27:2017	Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
PREN 13523-8 : DRAFT 2016	COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
PREN 14389-2 : DRAFT 2013	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
DIN EN 14509:2013-12	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
BS EN 13523-29:2017	Coil coated metals. Test methods Resistance to environmental soiling (Dirt pick-up and striping)
12/30268958 DC : 0	BS EN 13523-5 - COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
PREN 1090-2 : DRAFT 2015	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
14/30291744 DC : 0	BS EN 13523-23 - COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
PREN 13523-3 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
UNE-EN 1090-2:2011	Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
PREN 13523-4 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
16/30336501 DC : 0	BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
I.S. EN 16074:2011	PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
PREN 13523-0 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION AND LIST OF TEST METHODS
PREN 13523-7 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
DIN EN 1090-2:2015-07 (Draft)	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 13523-22:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
DIN EN 13523-26:2014-08	Coil coated metals - Test methods - Part 26: Resistance to condensation of water
DIN EN 13523-10:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
DIN EN 13523-17:2012-02	COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
DIN EN 505:2013-06	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
UNE-EN 13523-2:2014	Coil coated metals - Test methods - Part 2: Gloss
BS EN 14389-1:2015	Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
BS EN 13523-1:2017	Coil coated metals. Test methods Film thickness
EN 13523-20:2011	Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN 13523-11:2012	Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
I.S. EN 13523-7:2014	COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
I.S. EN 14389-2:2015	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
I.S. EN 13523-5:2014	COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
I.S. EN 13523-23:2015	COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
I.S. EN 13523-25:2014	COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
I.S. EN 13523-21:2017	COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
EN 508-1:2014	Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
I.S. EN 13523-8:2017	COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
I.S. EN 505:2013	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
I.S. EN 13523-13:2014	COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
I.S. EN 13523-12:2017	COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
I.S. EN 13523-1:2017	COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
DIN EN 13523-11:2011-09	COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
I.S. EN 13523-2:2014	COIL COATED METALS - TEST METHODS - PART 2: GLOSS
I.S. EN 508-1:2014	ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL
I.S. EN 13523-3:2014	COIL COATED METALS - TEST METHODS - PART 3: COLOUR DIFFERENCE - INSTRUMENTAL COMPARISON
I.S. EN 13523-15:2015	COIL COATED METALS - TEST METHODS - PART 15: METAMERISM
I.S. EN 13523-10:2017	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
I.S. EN 502:2013	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
I.S. EN 13964:2014	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
I.S. EN 13523-26:2014	COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
I.S. EN 13523-22:2017	COIL COATED METALS - TEST METHODS - PART 22: COLOUR DIFFERENCE - VISUAL COMPARISON
I.S. EN 13523-14:2014	COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
I.S. EN 13523-24:2017	COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
I.S. EN 13523-9:2014	COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
I.S. EN 13523-0:2014	COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION
I.S. EN 14389-1:2015	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
EN 13523-3:2014	Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
UNI EN 502 : 2013	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
16/30340560 DC : 0	BS EN 13523-8 - COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
12/30264367 DC : 0	BS EN 505 - ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
PREN 14389-1 : DRAFT 2013	ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
DIN EN 10346:2015-10	Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
12/30264373 DC : 0	BS EN 502 - ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
BS EN 10346:2015	Continuously hot-dip coated steel flat products for cold forming. Technical delivery conditions
12/30268964 DC : 0	BS EN 13523-9 - COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
15/30329704 DC : 0	BS EN 13523-10 - COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
DIN EN 13523-21:2016-07 (Draft)	COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
UNE-EN 10346:2015	Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
DIN EN 13523-27:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
DIN EN 13523-24:2016-07 (Draft)	COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
BS EN 14509:2013	Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
PREN 13523-24 : DRAFT 2016	COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
UNI EN 1090-2 : 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
CEN/TR 16239:2011	Installation rules of fibrous (gypsum) plaster works
UNI EN 16074 : 2011	PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
PREN 13523-23 : DRAFT 2014	COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
I.S. EN 13523-11:2011	COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
PREN 13523-1 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
PREN 505 : DRAFT 2012	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
PREN 13523-5 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
EN 1090-2:2008+A1:2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
PREN 1090-4 : DRAFT 2014	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
BS EN 1090-2 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 14509:2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
DIN EN 13523-12:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
DIN EN 13523-19:2011-09	COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
DIN EN 13523-14:2014-08	Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
DIN EN 13523-0:2014-08	Coil coated metals - Test methods - Part 0: General introduction
DIN EN 508-1:2014-08	Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
DIN EN 13523-2:2014-08	Coil coated metals - Test methods - Part 2: Gloss
DIN EN 13523-3:2014-08	Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
DIN EN 13964:2014-08	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 14509:2014	Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
BS EN 13523-15:2015	Coil coated metals. Test methods Metamerism
UNE-EN 13523-10:2017	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
UNE-EN 13523-4:2014	Coil coated metals - Test methods - Part 4: Pencil hardness
UNE-EN 13523-3:2014	Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
UNE-EN 13523-19:2011	Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
UNE-EN 13523-17:2012	Coil coated metals - Test methods - Part 17: Adhesion of strippable films
UNI EN 13523-20 : 2012	COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
I.S. EN 13523-20:2011	COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
EN 502:2013	Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
EN 13964:2014	Suspended ceilings - Requirements and test methods
UNI EN 14509 : 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNI EN 505 : 2013	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STEEL SHEET
UNI EN 13523-4 : 2014	COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
UNI EN 13523-14 : 2014	COIL COATED METALS - TEST METHODS - PART 14: CHALKING (HELMEN METHOD)
UNI EN 13523-13 : 2014	COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
UNI EN 13964 : 2014	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
UNI EN 13523-5 : 2014	COIL COATED METALS - TEST METHODS - PART 5: RESISTANCE TO RAPID DEFORMATION (IMPACT TEST)
02/102266 DC : DRAFT MAR 2002	PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
15/30329710 DC : 0	BS EN 13523-29 - COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
DIN EN 14509 E : 2013	SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS
UNE-EN 14389-1:2015	Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
14/30291747 DC : 0	BS EN 13523-15 - COIL COATED METALS - TEST METHODS - PART 15: METAMERISM
PREN 13523-12 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
I.S. EN 10346:2015	CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
PREN 13523-9 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
NF EN 1090-2 : 2009 + A1 2011	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
PREN 502 : DRAFT 2012	ROOFING PRODUCTS FORM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
I.S. EN 13523-19:2011	COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
UNI EN 13523-11 : 2011	COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
DIN EN 13523-13:2014-08	COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
DIN EN 13523-23:2015-09	Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
DIN EN 13523-25:2014-08	Coil coated metals - Test methods - Part 25: Resistance to humidity
DIN EN 13523-7:2014-08	Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
DIN EN 13523-5:2014-08	Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
DIN EN 13523-1:2015-12 (Draft)	COIL COATED METALS - TEST METHODS - PART 1: FILM THICKNESS
DIN EN 13523-9:2014-08	Coil coated metals - Test methods - Part 9: Resistance to water immersion
DIN EN 502:2013-06	ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR FULLY SUPPORTED ROOFING PRODUCTS OF STAINLESS STEEL SHEET
BS EN 13523-5:2014	Coil coated metals. Test methods Resistance to rapid deformation (impact test)
BS EN 13523-12:2017	Coil coated metals. Test methods Resistance to scratching
BS EN 508-1:2014	Roofing and cladding products from metal sheet. Specification for self-supporting of steel, aluminium or stainless steel sheet Steel
BS EN 502:2013	Roofing products from metal sheet. Specification for fully supported roofing products of stainless steel sheet
BS EN 13523-22:2017	Coil coated metals. Test methods Colour difference. Visual comparison
BS EN 14389-2:2015	Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
UNE-EN 14389-2:2015	Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
BS EN 13523-25:2014	Coil coated metals. Test methods Resistance to humidity
UNE-EN 13523-9:2014	Coil coated metals - Test methods - Part 9: Resistance to water immersion
UNE-EN 16074:2011	Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
BS EN 13523-21:2017	Coil coated metals. Test methods Evaluation of outdoor exposed panels
UNE-EN 13523-21:2017	Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
BS EN 13523-3:2014	Coil coated metals. Test methods Colour difference. Instrumental comparison
UNE-EN 13523-24:2017	Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
BS EN 13523-17:2011	Coil coated metals. Test methods Adhesion of strippable films
BS EN 13523-26:2014	Coil coated metals. Test methods Resistance to condensation of water
UNE-EN 13523-23:2015	Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
UNE-EN 13523-12:2017	Coil coated metals - Test methods - Part 12: Resistance to scratching
UNE-EN 13523-20:2012	Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN 502:2013	Roofing products from metal sheet - Specification for fully supported roofing products of stainless steel sheet
UNE-EN 13523-1:2017	Coil coated metals - Test methods - Part 1: Film thickness
UNE-EN 13523-8:2017	Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
DIN EN 13523-27:2009-10	COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
UNI EN 13523-26 : 2014	COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
EN 14389-2:2015	Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
UNI EN 13523-9 : 2014	COIL COATED METALS - TEST METHODS - PART 9: RESISTANCE TO WATER IMMERSION
EN 14509:2013	Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
UNI EN 13523-25 : 2014	COIL COATED METALS - TEST METHODS - PART 25: RESISTANCE TO HUMIDITY
EN 505:2013	Roofing products from metal sheet - Specification for fully supported roofing products of steel sheet
EN 14389-1:2015	Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
EN 16074:2011	Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
EN 13523-21:2017	Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
PD CEN/TR 16239:2011	Installation rules of fibrous (gypsum) plaster works
PREN 13523-2 : DRAFT 2012	COIL COATED METALS - TEST METHODS - PART 2: GLOSS
16/30340563 DC : 0	BS EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
12/30268973 DC : 0	BS EN 13523-2 - COIL COATED METALS - TEST METHODS - PART 2: GLOSS
12/30268961 DC : 0	BS EN 13523-7 - COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
DIN EN 13523-8:2016-07 (Draft)	COIL COATED METALS - TEST METHODS - PART 8: RESISTANCE TO SALT SPRAY (FOG)
15/30329713 DC : 0	BS EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
12/30268979 DC : 0	BS EN 13523-26 - COIL COATED METALS - TEST METHODS - PART 26: RESISTANCE TO CONDENSATION OF WATER
12/30268982 DC : 0	BS EN 13523-13 - COIL COATED METALS - TEST METHODS - PART 13: RESISTANCE TO ACCELERATED AGEING BY THE USE OF HEAT
16/30340557 DC : 0	BS EN 13523-21 - COIL COATED METALS - TEST METHODS - PART 21: EVALUATION OF OUTDOOR EXPOSED PANELS
I.S. EN 13523-4:2014	COIL COATED METALS - TEST METHODS - PART 4: PENCIL HARDNESS
DIN EN 16074:2011-09	PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
PREN 13964 : DRAFT 2013	SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS
PREN 13523-29 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
I.S. EN 1090-2:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 13523-17:2011	COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
15/30326160 DC : 0	BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS
BS EN 13523-19:2011	Coil coated metals. Test methods Panel design and method of atmospheric exposure testing
PREN 13523-27 : DRAFT 2015	COIL COATED METALS - TEST METHODS - PART 27: RESISTANCE TO HUMID POULTICE (CATAPLASM TEST)
DIN EN 13523-20:2012-02	COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
UNE-EN 13964:2016	Suspended ceilings - Requirements and test methods
UNE-EN 13523-22:2017	Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
UNE-EN 508-1:2014	Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
BS EN 13523-9:2014	Coil coated metals. Test methods Resistance to water immersion
BS EN 13523-14:2014	Coil coated metals. Test methods Chalking (Helmen method)
BS EN 505:2013	Roofing products from metal sheet. Specification for fully supported roofing products of steel sheet
BS EN 13523-7:2014	Coil coated metals. Test methods Resistance to cracking on bending (T-bend test)
UNE-EN 13523-15:2015	Coil coated metals - Test methods - Part 15: Metamerism
BS EN 13523-0:2014	Coil coated metals. Test methods General introduction
BS EN 13523-10:2017	Coil coated metals. Test methods Resistance to fluorescent UV radiation and water condensation
BS EN 13523-23:2015	Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide
EN 13523-27:2017	Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
EN 13523-7:2014	Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-2:2014	Coil coated metals - Test methods - Part 2: Gloss
EN 13523-1:2017	Coil coated metals - Test methods - Part 1: Film thickness
EN 13523-22:2017	Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-19:2011	Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
EN 13523-15:2015	Coil coated metals - Test methods - Part 15: Metamerism
UNI EN 13523-2 : 2014	COIL COATED METALS - TEST METHODS - PART 2: GLOSS
EN 10346:2015	Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
UNI EN 13523-7 : 2014	COIL COATED METALS - TEST METHODS - PART 7: RESISTANCE TO CRACKING ON BENDING (T-BEND TEST)
EN 13523-25:2014	Coil coated metals - Test methods - Part 25: Resistance to humidity
DIN EN 13523-29:2017-05	COIL COATED METALS - TEST METHODS - PART 29: RESISTANCE TO ENVIRONMENTAL SOILING (DIRT PICK-UP AND STRIPING)
UNI EN 13523-0 : 2014	COIL COATED METALS - TEST METHODS - PART 0: GENERAL INTRODUCTION
DIN EN 13523-10:2017-05	COIL COATED METALS - TEST METHODS - PART 10: RESISTANCE TO FLUORESCENT UV RADIATION AND WATER CONDENSATION
EN 13523-10:2017	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation

Standards Referencing This Book - (Show below) - (Hide below)

ISO 9223:2012	Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
EN ISO 4628-2:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
EN 13523-11:2011	Coil coated metals - Test methods - Part 11: Resistance to solvents (rubbing test)
EN 10048:1996	Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051:2010	Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape
EN 10140:2006	Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10079:2007	Definition of steel products
EN 13523-12:2017	Coil coated metals - Test methods - Part 12: Resistance to scratching
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 13523-14:2014	Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
EN 10152:2017	Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions
EN 13523-10:2017	Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
EN 13523-26:2014	Coil coated metals - Test methods - Part 26: Resistance to condensation of water
EN ISO 1043-1:2011/A1:2016	PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016)
EN 13523-6:2002	Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
EN 10268:2006+A1:2013	COLD ROLLED STEEL FLAT PRODUCTS WITH HIGH YIELD STRENGTH FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 13523-24:2017	Coil coated metals - Test methods - Part 24: Resistance to blocking and pressure marking
ISO 2808:2007	Paints and varnishes Determination of film thickness
EN ISO 11997-1:2017	Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO 11997-1:2017)
EN 13523-9:2014	Coil coated metals - Test methods - Part 9: Resistance to water immersion
EN 13523-0:2014	Coil coated metals - Test methods - Part 0: General introduction
EN 10111:2008	Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
EN 13523-3:2014	Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
EN ISO 2409:2013	Paints and varnishes - Cross-cut test (ISO 2409:2013)
EN 10346:2015	Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN ISO 9227:2017	Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017)
EN 10139:2016	Cold rolled uncoated low carbon steel narrow strip for cold forming - Technical delivery conditions
EN 10025-1:2004	Hot rolled products of structural steels - Part 1: General technical delivery conditions
PREN 10338 : DRAFT 2013	HOT ROLLED AND COLD ROLLED NON-COATED FLAT PRODUCTS OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10088-2:2014	STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 10131:2006 (edition 2)	Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN ISO 4628-4:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking (ISO 4628-4:2016)
EN 13523-21:2017	Coil coated metals - Test methods - Part 21: Evaluation of outdoor exposed panels
ISO 4628-4:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 4: Assessment of degree of cracking
EN 13523-23:2015	Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide
ISO 2810:2004	Paints and varnishes Natural weathering of coatings Exposure and assessment
EN ISO 8044:2015	Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015)
ISO 12944-2:2017	Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
EN 10143:2006 (edition 2)	Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 13523-22:2017	Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
ISO 4628-5:2016	Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
EN 10021:2006	General technical delivery conditions for steel products
ISO 11997-1:2017	Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
ISO 8044:2015	Corrosion of metals and alloys Basic terms and definitions
EN 13523-18:2002	Coil coated metals - Test methods - Part 18: Resistance to staining
EN 13523-27:2017	Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
EN 10204:2004	Metallic products - Types of inspection documents
ISO 2815:2003	Paints and varnishes Buchholz indentation test
EN 10088-4:2009	Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10025-2:2004/AC:2005	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 4997:2015	Cold-reduced carbon steel sheet of structural quality
EN 13523-5:2014	Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test)
EN 13523-19:2011	Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing
EN 13523-8:2017	Coil coated metals - Test methods - Part 8: Resistance to salt spray (fog)
EN 10130:2006	Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
ISO 4618:2014	Paints and varnishes — Terms and definitions
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
EN ISO 2815:2003	Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
ISO 9227:2017	Corrosion tests in artificial atmospheres — Salt spray tests
EN 13523-7:2014	Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
EN 13523-1:2017	Coil coated metals - Test methods - Part 1: Film thickness
EN 13523-25:2014	Coil coated metals - Test methods - Part 25: Resistance to humidity
EN ISO 2810:2004	Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004)
EN 10020:2000	Definition and classification of grades of steel
EN 606:2004	BAR CODING - TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
EN ISO 4628-5:2016	Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5: Assessment of degree of flaking (ISO 4628-5:2016)
EN 13523-4:2014	Coil coated metals - Test methods - Part 4: Pencil hardness
ISO 2409:2013	Paints and varnishes Cross-cut test
EN 13523-15:2015	Coil coated metals - Test methods - Part 15: Metamerism
EN 13523-2:2014	Coil coated metals - Test methods - Part 2: Gloss
ISO 1043-1:2011	Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
EN ISO 2808:2007	Paints and varnishes - Determination of film thickness (ISO 2808:2007)
ISO 4628-2:2016	Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
EN ISO 4618:2014	Paints and varnishes - Terms and definitions (ISO 4618:2014)
EN 10088-1:2014	Stainless steels - Part 1: List of stainless steels

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart