EN 10208-2:2009

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B

Available format(s):

Superseded date: 01-11-2012

Language(s):

Published date: 18-03-2009

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Classification and designation
   5.1 Classification
   5.2 Designation
6 Information to be supplied by the purchaser
   6.1 Mandatory information
   6.2 Options
   6.3 Example of ordering
7 Manufacturing
   7.1 General
   7.2 Steelmaking
   7.3 Pipe manufacture
   7.4 Heat treatment condition
   7.5 Sizing
   7.6 Strip end welds
   7.7 Jointers
   7.8 General requirements for non-destructive
        testing
8 Requirements
   8.1 General
   8.2 Chemical composition
   8.3 Mechanical properties
   8.4 Weldability
   8.5 Appearance and soundness
   8.6 Dimensions, masses and tolerances
9 Inspection
   9.1 Types of inspection and inspection documents
   9.2 Summary of inspection and testing
   9.3 Selection and preparation of samples and test
        pieces
   9.4 Test methods
   9.5 Retests, sorting and reprocessing
10 Marking of the pipes
   10.1 General marking
   10.2 Special marking
11 Coating for temporary protection
Annex A (normative) - Manufacturing procedure qualification
Annex B (normative) - Treatment of imperfections and defects
        disclosed by visual examination
Annex C (normative) - Non-destructive testing
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies the technical delivery conditions for seamless and welded steel pipes for the on land transport of combustible fluids primarily in gas supply systems but excluding pipeline applications in the petroleum and natural gas exploration and production industries. It includes more stringent quality and testing requirements than those in EN 10208-1.NOTE 1Steel pipes for pipeline transportation systems within the petroleum and natural gas exploration and production industries are covered by ISO 3183 [1]. This standard specifies products with the same (and additional) strength levels and partly similar (but not identical) requirements as EN 10208-1 and EN 10208-2 and is with two additional annexes specifying deviating or additional requirements also published as API Spec 5L [4].NOTE 2This European Standard does not apply to cast steel pipe.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 10
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN ISO 3183:2012/A1:2018

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNI EN 10208-2 : 2009	Identical
NEN EN 10208-2 : 2009	Identical
BS EN 10208-2:2009	Identical
SN EN 10208-2 : 2009	Identical
ISO 3183-2:1996	Identical
UNE-EN 10208-2:2011	Identical
PN EN 10208-2 : 2011	Identical
NBN EN 10208-2 : 2009	Identical
NF EN 10208-2 : 2009	Identical
NS EN 10208-2 : 2009	Identical
I.S. EN 10208-2:2009	Identical
DIN EN 10208-2:2009-07	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 10253-2:2007	Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
12/30257298 DC : 0	BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS ISO 13577-3:2016	Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases
PD CR 10313:2000	Classification of grades of steel. Examples of classification related to European standards
09/30211880 DC : 0	BS EN 12732 - GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
PREN 10051 : DRAFT 2009	HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
DIN EN 10048:1996-10	HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
I.S. EN 13322-1:2003	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
EN 676:2003+A2:2008/AC:2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 10208-1:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
EN 10079:2007	Definition of steel products
EN 10048:1996	Hot rolled narrow steel strip - Tolerances on dimensions and shape
09/30202316 DC : 0	BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
DIN EN 10253-2:2008-09	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
DIN EN 15001-1:2011-02	Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
PREN 12732 : DRAFT 2009	GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS
09/30200092 DC : 0	BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
DIN 8563-123:1994-06 (Draft)	QUALITY ASSURANCE OF WELDED STRUCTURES; SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS; WELDING PROCEDURE TEST FOR PIPELINE WELDING ON SITE
I.S. CEN ISO TR 20172:2006	WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
EN 10253-2:2007	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
I.S. EN 10253-2:2007	BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
BS EN 746-2:2010	Industrial thermoprocessing equipment Safety requirements for combustion and fuel handling systems
13/30231511 DC : 0	BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS
I.S. EN 746-2:2010	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
DIN EN 10208-1:1998-02	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
I.S. EN 10079:2007	DEFINITION OF STEEL PRODUCTS
PREN 1594 : DRAFT 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
13/30258750 DC : 0	BS EN 12007-3 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
CEN ISO/TR 20172:2009	Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
NF EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
PD CEN ISO/TR 20172:2009	Welding. Grouping systems for materials. European materials
ONORM EN 13322-1 : 2006	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
DIN EN 746-2:2011-02	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
DIN EN 676:2012-03 (Draft)	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 676:2008-11	Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
ONORM EN 676 : 2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN 10079 : 2007	DEFINITION OF STEEL PRODUCTS
UNI EN 1993-4-3 : 2007	EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES
UNI EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 746-2 : 2011	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 2: SAFETY REQUIREMENTS FOR COMBUSTION AND FUEL HANDLING SYSTEMS
UNI EN 676 : 2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
PREN 676 : DRAFT 2012	FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
I.S. EN 15001-1:2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
DIN EN 13322-1:2006-05	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
S.R. CEN ISO TR 20172:2009	WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
BS EN 13322-1 : 2003	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
UNE-EN 15001-1:2010	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 10079:2007	Definition of steel products
BS EN 10048:1997	Hot rolled narrow steel strip. Tolerances on dimensions and shape
BS EN 676 : 2003	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS ISO 13577-2:2014	Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
EN 15001-1:2009	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
13/30271116 DC : 0	BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
S.R. CEN ISO/TR 20172:2021	Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
BS EN 15001-1:2009	Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
ISO 13577-3:2016	Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases
PREN 12007-3 : DRAFT 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
EN 13322-1:2003/A1:2006	TRANSPORTABLE GAS CYLINDERS - REFILLABLE WELDED STEEL GAS CYLINDERS - DESIGN AND CONSTRUCTION - PART 1: CARBON STEEL
ISO 13577-2:2014	Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems
S.R. CR 10313:2000	CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
I.S. EN 676:2003	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
ISO/TR 20172:2009	Welding Grouping systems for materials European materials
DIN EN 10079:2007-06	Definition of steel products
CR 10313:2000	Classification of grades of steel - Examples of classification related to European Standards

Standards Referencing This Book - (Show below) - (Hide below)

EN ISO 14284:2002	Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996)
EN 10002-1 : 2001	METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 10052:1993	Vocabulary of heat treatment terms for ferrous products
EN 10246-17:2000	Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections
EN ISO 6508-1:2016	Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
EN ISO 6506-1:2014	Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014	Metallic materials Brinell hardness test Part 1: Test method
EN 10079:2007	Definition of steel products
EN 10027-2:2015	DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
CEN/TR 10261:2013	Iron and steel - European standards for the determination of chemical composition
EN ISO 377:2017	Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017)
ISO 6508-1:2016	Metallic materials — Rockwell hardness test — Part 1: Test method
EN 1594:2013	Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 10256:2000	Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel
EN 1011-1:2009	Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
ISO 3183:2012	Petroleum and natural gas industries Steel pipe for pipeline transportation systems
EN 10168:2004	Steel products - Inspection documents - List of information and description
EN ISO 2566-1:1999	Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
EN 473:2008	Non-destructive testing - Qualification and certification of NDT personnel - General principles
API 5L : 2012	LINE PIPE
EN 10274:1999	Metallic materials - Drop weight tear test
EN 910 : 1996	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
EN 1011-2:2001/A1:2003	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
EN 10045-1 : 1990	METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
EN 10246-7:2005	Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) tubes for the detection of longitudinal imperfections
EN 10246-16:2000	Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections
EN 10021:2006	General technical delivery conditions for steel products
EN 10246-10:2000	Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
ISO 2566-1:1984	Steel Conversion of elongation values Part 1: Carbon and low alloy steels
EN 10204:2004	Metallic products - Types of inspection documents
EN 10246-9:2000	Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections
EN 10246-3:1999	Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections
ISO 19232-1:2013	Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators
EN 10027-1:2016	Designation systems for steels - Part 1: Steel names
ISO 8492:2013	Metallic materials Tube Flattening test
EN 10020:2000	Definition and classification of grades of steel
EN ISO 8492:2013	Metallic materials - Tube - Flattening test (ISO 8492:2013)
EN 10246-15:2000	Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections
EN 10246-14:1999	Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections
EN 10266:2003	Steel tubes, fittings and structural hollow sections - Symbols and definitions of terms for use in product standards
EN 10220:2002	Seamless and welded steel tubes - Dimensions and masses per unit length
ISO 377:2017	Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ISO 14284:1996	Steel and iron — Sampling and preparation of samples for the determination of chemical composition
EN 10246-8:1999	Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing of the weld seam of electric welded steel tubes for the detection of longitudinal imperfections
EN 10246-5 : 1999	NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 5: AUTOMATIC FULL PERIPHERAL MAGNETIC TRANSDUCER/FLUX LEAKAGE TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC WELDED) FERROMAGNETIC STEEL TUBES FOR THE DETECTION OF LONGITUDINAL IMPERFECTIONS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart