EN 10222-5:2017

Current

Current The latest, up-to-date edition.

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels

Available format(s):

Language(s):

Published date: 12-04-2017

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and designation
5 Information to be supplied by the purchaser
6 Requirements
7 Inspection
8 Sampling
9 Test methods
10 Retests
11 Marking
Annex A (informative) - Reference data for creep
        rupture strength
Annex B (informative) - Post weld heat treatment
Annex C (informative) - Significant technical changes
        to the version EN 10222-5:1999
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2014/68/EU
Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies the technical delivery conditions for forgings for pressure purposes, made of stainless steels, including creep resisting steels. Chemical composition and mechanical properties are specified.NOTEOnce this standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this standard and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done. The series EN 10222-1 to EN 10222−5 is structured so that the data related to different materials is in the part allocated for that material. The presumption of conformity to the Essential Safety Requirements of Directive 2014/68/EU depends on both the text in part 1 and the data in part 2, 3, 4 or 5.General information on technical delivery conditions is given in EN 10021.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 11
Development Note	Supersedes PREN 10222-5. (04/2017)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current
Supersedes	PREN 10222-5 : DRAFT 2012 EN 10222-5:1999

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DIN EN 10222-5:2000-02	Identical
DIN EN 10222-5:2013-01 (Draft)	Identical
BS EN 10222-5:2017	Identical
NEN EN 10222-5 : 2017	Identical
UNE-EN 10222-5:2017	Identical
SN EN 10222-5 : 2017	Identical
UNI EN 10222-5 : 2001	Identical
NBN EN 10222-5 : 2000	Identical
PN-EN 10222-5:2017-07	Identical
NS EN 10222-5 : 2017	Identical
NF EN 10222-5 : 2017	Identical
I.S. EN 10222-5:2017	Identical
UNI EN 10222-5 : 2017	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN 16272:2004-07	PN 250 and PN 400 valves with shut-off test connection for pressure gauges
BS EN 12693:2008	Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
08/30193157 DC : 0	BS EN ISO 13628-1:2005/AMD 2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
05/30132854 DC : DRAFT APR 2005	EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
BS EN 15069:2008	Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel
DIN 16271:2004-07	PN 250 and PN 400 valves with test connection for pressure gauges
10/30227442 DC : 0	BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
PD CEN/TR 14585-3:2017	Corrugated metal hose assemblies for pressure applications Design method
BS EN ISO 4126-2:2003	Safety devices for protection against excessive pressure Bursting disc safety devices
I.S. EN 13480-2:2017	METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
EN 10222-1:2017	Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 13480-2:2017	Metallic industrial piping Materials
DIN EN 1759-1:2005-02	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
I.S. EN 10222-1:2017	STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS
EN 12952-2:2011	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 10088-3:2014	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
I.S. EN 12284:2003	REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 10031:2003	Semi-finished products for forging - Tolerances on dimensions shape and mass
EN 12693:2008	Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
DIN 16263:2004-07	PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
UNI EN ISO 13628-15 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
ISO 4126-2:2003	Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
11/30249105 DC : 0	BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
DIN 16262:2004-07	PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
BS EN ISO 13628-15:2011	Petroleum and natural gas industries. Design and operation of subsea production systems Subsea structures and manifolds
DD ISO/TS 15510:2003	Stainless steels. Chemical composition
API 610 REDLINE : 2010	CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : ERR 1 : 2014	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
I.S. EN 16668:2016	INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
EN ISO 4126-2:2003/AC:2006	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
EN 10088-1:2014	Stainless steels - Part 1: List of stainless steels
DIN EN 12284:2004-01	Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 10302:2008-06	Creep resisting steels, nickel and cobalt alloys
BS EN ISO 13709:2003	Centrifugal pumps for petroleum, petrochemical and natural gas industries
DIN EN 10088-1:2014-12	Stainless steels - Part 1: List of stainless steels; German version EN 10088-1:2014
DIN EN 13611:2019-06	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 10088-1:2014	STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
I.S. EN 12952-2:2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 10088-3:2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 10302:2008	CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
KTA 3507 : 2014(R2017)	FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
KTA 3702 : 2014(R2017)	EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
NF EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 12693 : 2008	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
API 674 REDLINE : 2010	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
ISO/TS 15510:2003	Stainless steels Chemical composition
09/30172965 DC : 0	BS EN ISO 13628-15 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS
CEN ISO/TR 20172:2009	Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
17/30347443 DC : DRAFT JUN 2017	BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
CEN/TR 15623:2008	Food processing machinery - Route map - Materials for food area
PD CEN ISO/TR 20172:2009	Welding. Grouping systems for materials. European materials
API 674 : 2010 : INC : ERR 1 : 2015 : R2016	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
S.R. CEN TR 15623:2008	FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA
DIN EN 1092-1:2016-05 (Draft)	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
I.S. EN ISO 4126-2:2003	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
I.S. EN 1092-1:2007	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
I.S. EN 13611:2015	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
BS EN 1503-1:2000	Valves. Materials for bodies, bonnets and covers Steels specified in European Standards
UNE-EN 10088-3:2015	Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNI EN 10088-3 : 2014	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 12952-2 : 2011	WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 1106 : 2010	MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 1854 : 2010	PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 10302 : 2008	CREEP RESISTING STEELS, NICKEL AND COBALT ALLOYS
UNI EN 10088-1 : 2014	STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
API 682 : 2014	PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
16/30336440 DC : DRAFT MAR 2016	BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
11/30254168 DC : 0	BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN 17440:2001-03	STAINLESS STEELS - TECHNICAL DELIVERY CONDITIONS FOR DRAWN WIRE
PREN 10253-4 : DRAFT 2017	BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
10/30214867 DC : 0	BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 674 : 2010(R2016)	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
DIN 19207:2004-02	Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
API 17P : 2013	DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA STRUCTURES AND MANIFOLDS
UNI EN 12516-1 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
DIN 16270:2004-07	PN 250 and PN 400 valves without test connection for pressure gauges
07/30173429 DC : 0	BS EN ISO 13628-1 AMD2 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
API 610 : 2010	CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
API 674 : 2010 : ERR 2 : 2015	POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
I.S. EN 12693:2008	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
S.R. CEN/TR 14585-3:2017	CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
BS EN 12516-1 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
17/30360051 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 12516-1:2014	Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
KTA 3211.1 : 2015	PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
UNE-EN 12516-1:2016	Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
UNE-EN 13611:2016	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
DIN EN 13611:2016-09	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 12480:2018	Gas meters - Rotary displacement gas meters
S.R. CEN ISO TR 20172:2009	WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
I.S. EN 12480:2018	GAS METERS - ROTARY DISPLACEMENT GAS METERS
BS EN 13480-2:2017+A3:2018	Metallic industrial piping Materials
I.S. EN ISO 13709:2009	CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
BS EN 12284:2003	Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
UNE-EN 12952-2:2012	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
ISO 13710:2004	Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
BS EN 10088-3:2014	Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS EN ISO 13710:2004	Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
EN 13480-2:2017	Metallic industrial piping - Part 2: Materials
BS EN 1759-1:2004	Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
ISO 13628-15:2011	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 15: Subsea structures and manifolds
BS EN 10031:2003	Semi finished products for forging. Tolerances on dimensions shape and mass
EN ISO 13709:2009	Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN 16668:2016+A1:2018	Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN ISO 13628-15:2011	Petroleum and natural gas industries - Design and operation of subsea production systems - Part 15: Subsea structures and manifolds (ISO 13628-15:2011)
EN 1503-1:2000	Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
EN 1759-1:2004	Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN ISO 21049:2004	Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN ISO 13710:2004	Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
08/30184300 DC : DRAFT SEP 2008	BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
CEN/TR 14585-3:2017	Corrugated metal hose assemblies for pressure applications - Part 3: Design method
PD CR 10313:2000	Classification of grades of steel. Examples of classification related to European standards
12/30257022 DC : 0	BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
PREN 10088-3 : DRAFT 2011	STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
PD CEN/TR 15623:2008	Food processing machinery. Route map. Materials for food area
01/715519 DC : DRAFT NOV 2001	PREN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
S.R. CEN ISO/TR 20172:2021	Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
01/715452 DC : DRAFT NOV 2001	PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES
11/30254165 DC : 0	BS EN 10088-1 - STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
DIN EN 12693:2016-10 (Draft)	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
API 682 CHINESE : 2014	PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
KTA 3205.2 : 2015 COR 2016	COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
I.S. CEN ISO TR 20172:2006	WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
I.S. EN 12516-1:2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
I.S. EN ISO 13628-15:2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 15: SUBSEA STRUCTURES AND MANIFOLDS (ISO 13628-15:2011)
BS EN 13611:2015	Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
EN 1092-1:2018	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
UNI EN 1092-1 : 2013	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 12516-1:2015-01	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
UNI EN ISO 4126-2 : 2003	SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
PREN 10088-1 : DRAFT 2011	STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS
PREN 13611 : DRAFT 2017	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
S.R. CR 10313:2000	CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
DIN EN 12952-2:2011-10	Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
UNE-EN 10088-1:2015	Stainless steels - Part 1: List of stainless steels
ISO 21049:2004	Pumps Shaft sealing systems for centrifugal and rotary pumps
UNE-EN 10222-1:2017	Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN ISO 21049:2004	Pumps. Shaft sealing systems for centrifugal and rotary pumps
BS EN 10088-1:2014	Stainless steels List of stainless steels
BS EN 10222-1:2017	Steel forgings for pressure purposes General requirements for open die forgings
BS EN 12952-2:2011	Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
BS EN 10302:2008	Creep resisting steels, nickel and cobalt alloys
ISO 13709:2009	Centrifugal pumps for petroleum, petrochemical and natural gas industries
ISO/TR 20172:2009	Welding Grouping systems for materials European materials
DIN EN 12693:2008-09	REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 13611:2015/AC:2016	SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 12284 : 2003	REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
CR 10313:2000	Classification of grades of steel - Examples of classification related to European Standards
EN 10302:2008	Creep resisting steels, nickel and cobalt alloys
DIN EN 10031:2003-06	SEMI-FINISHED PRODUCTS FOR FORGING - TOLERANCES ON DIMENSIONS, SHAPE AND MASS
UNE-EN 13480-2:2017	Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

Standards Referencing This Book - (Show below) - (Hide below)

EN 10021:2006	General technical delivery conditions for steel products
ISO 3651-2:1998	Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
EN ISO 3651-2 : 1998	DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID
EN 10222-1:2017	Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
EN 10088-1:2014	Stainless steels - Part 1: List of stainless steels

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart