• EN 10226-2 : 2005

    Current The latest, up-to-date edition.

    PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 2: TAPER EXTERNAL THREADS AND TAPER INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION

    Available format(s): 

    Language(s): 

    Published date:  17-08-2005

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Symbols and explanations
    5 Dimensions
    6 Designation
    7 Thread design
      7.1 Thread form
      7.2 Thread lengths
    8 Gauging
    Bibliography

    Abstract - (Show below) - (Hide below)

    This document specifies the requirements for thread form, dimensions, tolerances and designation for jointing pipe threads, sizes 1/16 to 6 inclusive, for joints made pressure-tight by the mating of the threads.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    PREN 498 : DRAFT 2009 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED
    BS EN 16678:2015 Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
    11/30238482 DC : 0 BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
    12/30259203 DC : 0 BS EN 12007-5 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES, SPECIFIC FUNCTIONAL REQUIREMENTS
    10/30227098 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    PREN 624 : DRAFT 2009 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    I.S. EN 12007-5:2014 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS
    17/30363956 DC : 0 BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    I.S. EN 15502-1:2012 GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    UNE-EN 16678:2016 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
    17/30332894 DC : 0 BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
    DIN EN 334:2016-05 (Draft) GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    DIN EN 416-1:2009-09 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    DIN EN 777-1:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    DIN EN ISO 23553-1:2014-09 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
    DIN EN 777-3:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    UNE-EN 525:2010 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
    BS EN 624:2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    BS EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
    BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    BS EN 419-1:2009 Non-domestic gas-fired overhead luminous radiant heaters Safety
    BS EN 1458-1:2011 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety
    EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    EN 12007-5:2014 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5: Service lines - Specific functional requirements
    DIN EN 14543:2017-10 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
    EN 30-1-1:2008+A3:2013 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
    EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
    PREN 416 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
    BS EN 12007-5:2014 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Service lines. Specific functional requirements
    BS EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    13/30286091 DC : 0 BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
    17/30356713 DC BS EN 88-3. Safety and control devices for gas burners and gas burning appliances. Part 3. Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types
    PREN 16129 : DRAFT 2010 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 100 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    PREN 17175 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    UNI EN 12007-5 : 2014 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS
    PREN 88-3 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - PART 3: PRESSURE AND/OR FLOW RATE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 KPA, ELECTRONIC TYPES
    BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
    ONORM EN 334 : JUN 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    I.S. EN 334:2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    PREN 30-1-1 : DRAFT 2017 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
    EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
    DIN EN 203-1:2014-07 Gas heated catering equipment - Part 1: General safety rules
    DIN EN 1020:2010-05 NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    DIN EN 1319:2010-06 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    UNE-EN 1458-1:2012 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety
    BS EN 334 : 2005 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    BS EN 498:2012 Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included
    BS EN 1555-3 : 2010 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
    I.S. EN 624:2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    DIN EN 1775:2007-10 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
    I.S. EN 30-1-1:2008 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
    I.S. EN 1555-3:2010 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
    I.S. EN 498:2012 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    I.S. EN 14543:2017 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
    I.S. EN 203-1:2014 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
    I.S. EN 88-1:2011 PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA
    I.S. EN 1458-1:2011 DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
    I.S. EN 10255:2004 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
    I.S. EN 1775:2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
    DIN EN 16678 E : 2016 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
    10/30228056 DC : 0
    11/30240282 DC : DRAFT MAR 2011 BS EN 12828 - HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
    09/30207446 DC : 0 BS EN 498 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED
    DIN EN 12007-5:2014-07 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMIUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS
    15/30325369 DC : 0 BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE
    UNE-EN 16129:2014 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    12/30258147 DC : 0 BS EN 203-1 - GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
    EN 1555-3:2010+A1:2012 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
    PREN 10255 : DRAFT 2010 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
    UNI EN 1555-3 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 1555-3:2013-01 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings (includes Amendment A1:2012)
    DIN EN 14543 E : 2017 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
    DIN EN 14543:2013-11 (Draft) SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PARASOL PATIO HEATERS - FLUELESS RADIANT HEATERS FOR OUTDOOR OR AMPLY VENTILATED AREA USE
    BS EN 525:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
    BS EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    UNE-EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
    I.S. EN 777-4:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    I.S. EN 525:2009 NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    I.S. EN 777-2:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    I.S. EN 416-1:2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    I.S. EN 777-3:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    I.S. EN 1319:2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    I.S. EN 419-1:2009 NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    I.S. EN 621:2009 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
    I.S. EN 778:2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    I.S. EN 1020:2009 NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    I.S. EN 777-1:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    UNI EN 416-1 : 2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    UNI EN 1458-1 : 2012 DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
    UNI EN 498 : 2012 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - BARBECUES FOR OUTDOOR USE CONTACT GRILLS INCLUDED
    EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
    UNI EN 778 : 2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    UNI EN 10255 : 2007 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
    UNI EN 777-4 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    UNI EN 624 : 2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    UNI EN 1020 : 2009 NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
    UNI EN 1775 : 2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
    UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    UNI EN ISO 23553-1 : 2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
    UNI EN 1319 : 2010 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
    UNI EN 621 : 2010 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    UNI EN 525 : 2009 NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    UNI EN 777-1 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
    UNI EN 777-2 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    UNI EN 419-1 : 2009 NON DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    UNI EN 777-3 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
    08/30191150 DC : 0 BS EN 1555-3 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS
    UNI EN 16129 : 2013 PRESSURE REGULATORS, AUTOMATIC CHANGE-OVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    PREN 484 : DRAFT 2015 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE
    17/30363953 DC : 0 BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    PREN 203-1 : DRAFT 2012 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
    PREN 419 : DRAFT 2017 GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    13/30276940 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    07/30163045 DC : DRAFT AUG 2007 BS EN 525 - NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    09/30204183 DC : 0 BS EN 88-1 - PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 500 MBAR
    DIN EN 15502-1:2015-10 Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015)
    DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    I.S. EN 16125:2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
    I.S. EN ISO 23553-1:2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
    BS EN 16125 : 2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    17/30363959 DC : 0 BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
    DIN EN 525:2009-11 NON-DOMESTIC DIRECT GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
    DIN EN 778:2010-03 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 70 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    DIN EN 88-1:2016-06 PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA
    BS EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    BS EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
    UNE-EN 498:2012 Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included
    BS EN 10255:2004 Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
    BS EN 777-2 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    BS EN ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
    BS EN 88-1 : 2011 PRESSURE REGULATORS AND ASSOCIATED SAFETY DEVICES FOR GAS APPLIANCES - PART 1: PRESSURE REGULATORS FOR INLET PRESSURES UP TO AND INCLUDING 50 KPA
    ISO 23553-1:2014 Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
    12/30250105 DC : 0 BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
    BS EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety
    BS EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety
    UNE-EN 1020:2010 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    BS EN 203-1:2014 (published 2016-04) Gas heated catering equipment General safety rules
    UNE-EN 30-1-1:2009 Domestic cooking appliances burning gas - Part 1-1: Safety - General
    UNE-EN 14543:2006 Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
    UNE-EN 778:2010 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    UNE-EN 624:2011 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
    EN 1458-1:2011 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety
    EN 1775 : 2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
    EN 14543:2017 Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - Flueless radiant heaters for outdoor or amply ventilated area use
    EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
    EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
    EN 16678:2015 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
    EN 525:2009 Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
    EN 778:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
    EN 16125 : 2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
    EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    EN 416-1 : 2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
    EN 419-1 : 2009 NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    EN 498:2012 Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included
    EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
    EN ISO 23553-1:2014 SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
    EN 334:2005+A1:2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
    EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
    EN 624:2011 SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    UNI EN 203-1 : 2014 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    09/30201902 DC : 0 BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS
    DIN EN 16129:2013-08 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
    DIN EN 12007-5 E : 2014 GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS
    S.R. 12007-5:2016 GUIDANCE ON THE APPLICATION OF I.S. EN 12007-5:2014, GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 5: SERVICE LINES - SPECIFIC FUNCTIONAL REQUIREMENTS
    10/30233309 DC : 0 BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
    06/19977015 DC : DRAFT JULY 2006 BS EN 10344 - MALLEABLE CAST IRON FITTINGS WITH COMPRESSION ENDS FOR STEEL PIPES
    DIN EN 16678:2016-02 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
    BS EN 15502-1 : 2012 GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    I.S. EN 16129:2013 PRESSURE REGULATORS, AUTOMATIC CHANGEOVER DEVICES, HAVING A MAXIMUM REGULATED PRESSURE OF 4 BAR, WITH A MAXIMUM CAPACITY OF 150 KG/H, ASSOCIATED SAFETY DEVICES AND ADAPTORS FOR BUTANE, PROPANE, AND THEIR MIXTURES
    UNI EN 334 : 2009 GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    I.S. EN 16678:2015 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 498:2012-04 Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included
    DIN EN 624:2011-10 Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
    DIN EN 777-4:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
    DIN EN 777-2:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
    DIN EN 419-1:2009-07 NON-DOMESTIC GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS - PART 1: SAFETY
    DIN EN 10255:2015-05 (Draft) NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
    DIN EN 30-1-1:2013-06 Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013)
    BS EN 1775 : 2007 GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
    BS EN 14543:2017 Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use
    BS EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
    BS EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety
    BS EN 30-1-1 : 2008 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
    EN 203-1:2014/AC:2016 GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
    EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
    DIN EN 621:2010-04 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
    EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
    DIN EN 10255:2007-07 Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007)
    I.S. EN 13611:2015&AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 15502-1:2012+A1:2015 GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
    DIN EN 1458-1:2012-02 DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
    UNI EN 30-1-1 : 2013 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
    EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 228-1 : 2003 PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS - PART 1: DIMENSIONS, TOLERANCES AND DESIGNATION
    ISO 7-1:1994 Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
    EN 10226-3 : 2005 PIPES THREADS WHERE PRESSURE TIGHT JOINT ARE MADE ON THE THREADS - PART 3: VERIFICATION BY MEANS OF LIMIT GAUGES
    EN 10226-1 : 2004 PIPE THREADS WHERE PRESSURE TIGHT JOINTS ARE MADE ON THE THREADS - PART 1: TAPER EXTERNAL THREADS AND PARALLEL INTERNAL THREADS - DIMENSIONS, TOLERANCES AND DESIGNATION
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective