EN 10246-9:2000

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of longitudinal and/or transverse imperfections

Available format(s):

Superseded date: 01-04-2011

Language(s):

Published date: 16-02-2000

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 SCOPE
2 NORMATIVE REFERENCES
3 GENERAL REQUIREMENTS
4 METHOD OF TEST
5 REFERENCE STANDARDS
6 EQUIPMENT CALIBRATION AND CHECKING
7 ACCEPTANCE
8 TEST REPORTING
ANNEX A (informative) Table A.1: Parts of EN 10246 -
Non-destructive testing of steel tubes

Abstract - (Show below) - (Hide below)

This Part of EN 10246 specifies the requirements for the automatic ultrasonic testing of the weld seam of submerged arc-welded (longitudinally or helically) tubes for the detection of imperfections oriented predominantly parallel to and/or at right angles to the weld seam. The standard specifies acceptance levels and calibration procedures. European Standard EN 102 46 "Non-destructive testing of steel tubes" comprises the parts shown in Annex A.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 459/SC 10
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN ISO 10893-11:2011

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NS EN 10246-9 : 1ED 2000	Identical
I.S. EN 10246-9:2000	Identical
NBN EN 10246-9 : 2000	Identical
SN EN 10246-9 : 2000	Identical
PN EN 10246-9 : 2004	Identical
NEN EN 10246-9 : 2000	Identical
BS EN 10246-9:2000	Identical
UNE-EN 10246-9:2000	Identical
UNI EN 10246-9 : 2002	Identical
NF EN 10246-9 : 2000	Identical
DIN EN 10246-9:2000-06	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

I.S. EN 10208-2:2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
PREN 10217-6 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
09/30207517 DC : 0	BS EN 10217-6 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10217-3:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 10217-6:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
BS EN 10217-5:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-5:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
DIN EN 10208-1:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 10296-1 E : 2004	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY AND ALLOY STEEL TUBES
EN 10224:2002/A1:2005	NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
EN 10296-1:2003	Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
EN 10219-1:2006	Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-1:2006	Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10208-1:2009	Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A
EN 10296-2:2005/AC:2007	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10253-2:2008-09	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
09/30207501 DC : 0	BS EN 10217-1 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
03/103470 DC : DRAFT FEB 2003	BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
I.S. EN 10217-5:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 10253-2:2007	Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
PREN 10217-3 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-6:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
EN 10217-1:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
I.S. EN 10253-2:2007	BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
DIN EN 10296-2 : 2007-06	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10208-2:2009-07	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
I.S. EN 10296-2:2006	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
DIN EN 10210-1:2006-07	Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
DIN EN 10208-1:1998-02	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
I.S. EN 10219-1:2006	COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
I.S. EN 10210-1:2006	HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
NF EN 14276-2 : 2007 + A1 2011	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
08/30182454 DC : DRAFT JULY 2008	BS EN 10208-1 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
09/30207514 DC : 0	BS EN 10217-5 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
09/30207521 DC : 0	BS EN 10217-7 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
05/30114218 DC : DRAFT FEB 2005	EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
EN 10217-3:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-5:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
PREN 10217-7 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
DIN EN 10217-3:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 10217-1:2005-04	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
BS EN 10217-6:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties
UNE-EN 10208-1:2011	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A
DIN EN 14276-2:2011-05	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
BS EN 10208-2:2009	Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class B
DIN EN 10296-2 E : 2006	WELDED CIRCULAR STEEL TUBES FOR MECHANICAL AND GENERAL ENGINEERING PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: STAINLESS STEEL
BS EN 10224:2002	Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions
UNI EN 14276-2 : 2011	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
UNI EN 10208-2 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
UNI EN 10219-1 : 2006	COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY CONDITIONS
UNI EN 10208-1 : 2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
DIN EN 10210-1:2016-01 (Draft)	Hot finished structural steel hollow sections - Part 1: General; German and English version prEN 10210-1:2016
BS EN 10217-1:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
03/103468 DC : DRAFT FEB 2003	BS EN 10210-1 - HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 1: TECHNICAL DELIVERY REQUIREMENTS
BS EN 10217-3:2002	Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
I.S. EN 10217-1:2002	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 10217-6:2002/A1:2005	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNE-EN 10208-2:2011	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 10219-1:2016-01 (Draft)	Cold formed welded structural steel hollow sections - Part 1: General; German and English version prEN 10219-1:2016
BS EN 10296-2:2005	Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Stainless steel
BS EN 14276-2 : 2007	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
I.S. EN 14276-2:2007	PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
EN 14276-2:2007+A1:2011	Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
DIN EN 10224:2005-12	NON-ALLOY STEEL TUBES AND FITTINGS FOR THE CONVEYANCE OF WATER AND OTHER AQUEOUS LIQUIDS - TECHNICAL DELIVERY CONDITIONS
BS EN 10253-2:2007	Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
I.S. EN 10208-1:2009	STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A
09/30207508 DC : 0	BS EN 10217-3 - WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNE-EN 14276-2:2008	Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
08/30182457 DC : DRAFT JULY 2008	BS EN 10208-2 - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 2: PIPES OF REQUIREMENT CLASS B
PREN 10217-5 : DRAFT 2009	WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10296-1:2003	Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions Non-alloy and alloy steel tubes
DIN EN 10296-1:2004-02	Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
BS EN 10208-1:2009	Steel pipes for pipelines for combustible fluids. Technical delivery conditions Pipes of requirement class A
BS EN 10210-1:2006	Hot finished structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
BS EN 10219-1:2006	Cold formed welded structural hollow sections of non-alloy and fine grain steels Technical delivery requirements
DIN EN 10296-2:2006-02	Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10208-2:2009	Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
DIN EN 10219-1:2006-07	Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions

Standards Referencing This Book - (Show below) - (Hide below)

EN 20286-2 : 1993	ISO SYSTEM OF LIMITS AND FITS - TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS
ISO 286-2:2010	Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 235:2016	Parallel shank jobber and stub series drills and Morse taper shank drills

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart