• There are no items in your cart

EN 12266-1:2012

Current

Current

The latest, up-to-date edition.

Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements

Published date

04-04-2012

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Test requirements
5 Designation
Annex A (normative) - Test procedures and acceptance
        criteria
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 97/23/EC (PED)
Bibliography

This European Standard specifies requirements for tests, test procedures and acceptance criteria for production testing of industrial valves made of metallic materials.The specified tests may also be used as type tests or acceptance tests.Safety devices are not covered by EN 12266-1.When specified as a normative reference in a valve product or performance standard, this European Standard is to be considered in conjunction with given specific requirements of the valve product or performance standard. Where requirements in a product or performance standard differ from those given in this European Standard, the requirements of the product or performance standard apply.NOTEFor testing of industrial valves of thermoplastic materials, ISO 9393-1 and ISO 9393-2 apply.

Committee
CEN/TC 69
DevelopmentNote
Supersedes PREN 12266-1. (04/2012)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

DIN 16272:2004-07 PN 250 and PN 400 valves with shut-off test connection for pressure gauges
06/30157850 DC : 0 BS EN 13083 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
BS EN 16678:2015 Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
UNE-EN 15208:2014 Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications
I.S. EN 14341:2006 INDUSTRIAL VALVES - STEEL CHECK VALVES
PREN 1171 : DRAFT 2014 INDUSTRIAL VALVES - CAST IRON GATE VALVES
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
13/30275593 DC : 0 BS EN 14432 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
UNE-EN 16257:2013 Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom)
05/30134037 DC : 0 EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
09/30197069 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN 593:2017 Industrial valves. Metallic butterfly valves for general purposes
BS EN 16767:2016 Industrial valves. Steel and cast iron check valves
I.S. EN 14512:2006 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS - HINGED MANHOLE COVERS AND NECKRINGS WITH PIVOTING BOLTS
DIN CEN/TS 13547:2007-02 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
DIN EN 14564 E : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
DIN EN 16249:2013-11 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - CAP FOR THE ADAPTOR FOR BOTTOM LOADING AND UNLOADING
11/30243007 DC : 0 BS EN 14564 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
UNE-EN 16767:2017 Industrial valves - Steel and cast iron check valves
06/30125798 DC : 0 EN 13082 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE
14/30301577 DC : 0 BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
UNE-EN 13547:2014 Industrial valves - Copper alloy ball valves
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
18/30368654 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 13547:2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
EN 12972:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
UNE-EN 16678:2016 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
17/30363721 DC : 0 BS EN 14564 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
I.S. EN ISO 16136:2006 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
I.S. EN 488:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
I.S. EN ISO 21787:2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16138:2006 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16139:2006 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16135:2006 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
ONORM EN ISO 16139 : 2008 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
I.S. EN ISO 16137:2006 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
DIN EN 13709:2010-10 Industrial valves - Steel globe and globe stop and check valves
DIN EN 13081:2012-05 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (includes Amendment A1:2012)
DIN EN 12972:2015-04 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
DIN EN 14267 E : 2004 IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
UNE-EN 1983:2014 Industrial valves - Steel ball valves
BS EN 12288:2010 Industrial valves. Copper alloy gate valves
BS EN 15208:2014 Tanks for transport of dangerous goods. Sealed parcel delivery systems. Working principles and interface specifications
BS EN 14267:2004 Irrigation techniques. Irrigation hydrants
BS EN ISO 16135:2006 Industrial valves. Ball valves of thermoplastic materials
UNE-EN 14595:2016 Tanks for transport of dangerous goods - Service equipment - Breather device
UNE-EN 14432:2015 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
BS EN 1984:2010 Industrial valves. Steel gate valves
UNE-EN 14433:2015 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
BS EN ISO 16139:2006 Industrial valves. Gate valves of thermoplastic materials
I.S. EN 14433:2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
I.S. EN 12288:2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
EN 12288:2010 Industrial valves - Copper alloy gate valves
EN 12952-14:2004 Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
UNI EN 12516-2 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
DIN EN 12952-14:2004-09 Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
EN 13083:2008+A1:2013 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
EN 13082:2008+A1:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
EN 13547:2013 Industrial valves - Copper alloy ball valves
EN ISO 28921-1:2017 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
EN 1349:2009 Industrial process control valves
EN 13081:2008+A1:2012 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
CEN/TS 13547:2006 Industrial valves - Copper alloy ball valves
BS EN 1349:2009 Industrial process control valves
I.S. EN 14596:2005 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE
PREN 13774 : DRAFT 2011 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN ISO 28921-1:2017-05 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
11/30246933 DC : 0 BS ISO 28921-1 - INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW TEMPERATURES APPLICATION - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING
06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
14/30294473 DC : 0 BS EN 488 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN ISO 28921-1:2017 Industrial valves. Isolating valves for low-temperature applications Design, manufacturing and production testing
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
I.S. EN 12972:2015 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
PREN 13789 : DRAFT 2009 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
PREN 13709 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
PREN 1984 : DRAFT 2009 INDUSTRIAL VALVES - STEEL GATE VALVES
11/30214024 DC : 0 BS EN 16257 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA. (NOM)
BS ISO 5208:2015 Industrial valves. Pressure testing of metallic valves
BS EN 16257:2012 Tanks for the transport of dangerous goods. Service equipment. Footvalve sizes other than 100 mm dia (nom)
11/30249108 DC : 0 BS EN 12516-2 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
BS ISO 28921-1 : 2013 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING
DIN 16271:2004-07 PN 250 and PN 400 valves with test connection for pressure gauges
05/30132851 DC : DRAFT APR 2005 EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
PREN 16257 : DRAFT 2011 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA. (NOM)
I.S. EN 593:2017 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
DD CEN/TS 13547:2006 Industrial valves. Copper alloy ball valves
I.S. EN 16125:2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
UNE-EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
17/30341738 DC : 0 BS EN 14596 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE
DIN EN 12516-4:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
EN 12516-4:2014 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
ONORM EN ISO 16136 : 2008 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
ONORM EN ISO 16137 : 2008 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
DIN EN 12288:2010-10 Industrial valves - Copper alloy gate valves
DIN EN 1626:2009-01 CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
DIN EN 1171:2015-11 INDUSTRIAL VALVES - CAST IRON GATE VALVES
DIN EN 1984:2010-10 Industrial valves - Steel gate valves
DIN EN 14433:2014-12 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
DIN EN 15208:2014-07 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
DIN EN 14267:2004-10 IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
DIN EN 14432:2014-12 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
BS EN 14564:2013 Tanks for transport of dangerous goods. Terminology
ISO 16136:2006 Industrial valves Butterfly valves of thermoplastics materials
UNE-EN 12516-2:2016 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
BS EN 14595:2005 Tanks for transport of dangerous goods. Service equipment for tanks. Pressure and vacuum breather vent
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
UNE-EN 593:2009 Industrial valves - Metallic butterfly valves
BS EN 13709:2002 Industrial valves. Steel globe and globe stop and check valves
I.S. EN 1626:2008 CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
I.S. EN 1171:2015 INDUSTRIAL VALVES - CAST IRON GATE VALVES
I.S. EN 13774:2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
I.S. EN 12516-2:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
I.S. EN 1074-6:2009 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
I.S. EN 12266-2:2012 INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS
I.S. EN 14595:2016 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER VENT
I.S. EN 13083:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
I.S. EN 1984:2010 INDUSTRIAL VALVES - STEEL GATE VALVES
DIN EN 1983:2013-12 INDUSTRIAL VALVES - STEEL BALL VALVES
I.S. EN 12561-3:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
DIN EN 13082:2012-05 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve (includes Amendment A1:2012)
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 1983:2013 INDUSTRIAL VALVES - STEEL BALL VALVES
I.S. EN 13081:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
I.S. EN 1349:2009 INDUSTRIAL PROCESS CONTROL VALVES
I.S. EN 13789:2010 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
I.S. EN 15208:2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
I.S. EN 13082:2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE
I.S. EN 13709:2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
I.S. EN 14432:2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
UNI EN 14432 : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
UNI EN 1349 : 2010 INDUSTRIAL PROCESS CONTROL VALVES
VDI/VDE 2178:2009-07 Fluidic characteristic quantities of quarter turn valves and their determination
VDI/VDE 2176:2007-09 Fluidic characteristic quantities of vanes and their determination
VDI 2200:2007-06 Tight flange connections - Selection, calculation, design and assembly of bolted flange connections
04/30118763 DC : DRAFT AUG 2004 PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES
14/30297539 DC : 0 BS EN 14595 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER DEVICE
06/30125744 DC : 0 EN 13081 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
09/30205877 DC : 0 BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES
07/30144848 DC : 0 ISO 5208 - INDUSTRIAL VALVES - PRESSURE TESTING OF METALLIC VALVES
PREN 12516-4 : DRAFT 2011 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
PREN 14596 : DRAFT 2017 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE
PREN 14564 : DRAFT 2017 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
I.S. EN 12516-4:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
13/30280746 DC : 0 BS EN 14433 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
09/30205883 DC : 0 BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
UNI EN 14564 : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
09/30205880 DC : DRAFT OCT 2009 BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
DIN 16262:2004-07 PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
DIN EN 16767 E : 2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
ISO 5208:2015 Industrial valves Pressure testing of metallic valves
BS EN 14596:2005 Tanks for transport of dangerous goods. Service equipment for tanks. Emergency pressure relief valve
11/30249111 DC : 0 BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 16249 : 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - CAP FOR THE ADAPTOR FOR BOTTOM LOADING AND UNLOADING
IEC 62828-2:2017 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
DIN EN 13317:2007-02 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY
I.S. EN 14564:2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
I.S. EN 16767:2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
EN IEC 62828-2:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
BS EN 16668 : 2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
UNI EN 13547 : 2013 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
EN 13317:2002+A1:2006 Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly
I.S. CEN TS 13547:2006 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
EN 12516-2:2014 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
ONORM EN ISO 16138 : 2008 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
DIN EN 13083:2013-08 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
DIN EN 1074-6:2009-03 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
DIN EN ISO 16135:2006-06 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
DIN EN 488:2016-02 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN 12972:2015 Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
BS EN ISO 16138:2006 Industrial valves. Diaphragm valves of thermoplastics materials
BS EN 1626:2008 Cryogenic vessels. Valves for cryogenic service
ISO 16135:2006 Industrial valves Ball valves of thermoplastics materials
EN 12569:1999/AC:2000 INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
EN 488:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
UNI EN 12288 : 2010 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
UNI EN 1983 : 2013 INDUSTRIAL VALVES - STEEL BALL VALVES
UNI EN 13083 : 2013 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
UNI EN 13774 : 2013 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
UNI EN 13789 : 2010 INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 14141 : 2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 15208 : 2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
UNI EN 1626 : 2009 CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE
UNI EN 13082 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE
UNI EN 13081 : 2012 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
UNI EN 12561-3 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
UNI EN 1984 : 2010 INDUSTRIAL VALVES - STEEL GATE VALVES
UNI EN 14433 : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
BS EN 1171:2015 Industrial valves. Cast iron gate valves
UNI EN 13709 : 2010 INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES
UNI EN 12266-2 : 2012 INDUSTRIAL VALVES - TESTING OF METALLIC VALVES - PART 2: TESTS, TEST PROCEDURES AND ACCEPTANCE CRITERIA - SUPPLEMENTARY REQUIREMENTS
UNI EN 1074-6 : 2009 VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
DIN EN 13547:2013-12 INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
DIN 16263:2004-07 PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
DIN EN 16678 E : 2016 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
I.S. EN 13317:2002 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY
14/30282872 DC : 0 BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES
DIN EN 14596:2005-06 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE
UNE-EN 16249:2014 Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading
BS EN 13547:2013 Industrial valves. Copper alloy ball valves
PREN 13317 : DRAFT 2017 TANKS FOR TRANSPORTING DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
PREN 593 : DRAFT 2016 INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
12/30261228 DC : 0 BS EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
PREN 12972 : DRAFT 2017 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
13/30276940 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
EEMUA 205 : 2008 GUIDE TO THE PRODUCTION TESTING OF VALVES FOR THE ENERGY, PROCESS AND RELATED INDUSTRIES
BS EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
08/30179182 DC : DRAFT MAY 2008 BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES
DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
UNI EN 12516-4 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN 16270:2004-07 PN 250 and PN 400 valves without test connection for pressure gauges
DIN EN ISO 28921-1 E : 2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
DIN EN 16257:2012-12 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM)
I.S. EN ISO 28921-1:2017 INDUSTRIAL VALVES - ISOLATING VALVES FOR LOW-TEMPERATURE APPLICATIONS - PART 1: DESIGN, MANUFACTURING AND PRODUCTION TESTING (ISO 28921-1:2013)
UNE-EN 12516-4:2016 Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
I.S. EN IEC 62828-2:2018 REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 2: SPECIFIC PROCEDURES FOR PRESSURE TRANSMITTERS
I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
PREN 12288 : DRAFT 2009 INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES
BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
PREN 14433 : DRAFT 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
17/30360691 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
17/30341744 DC : 0 BS EN 17110 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR MANIFOLD VENT VALVE
BS EN 13317:2002 Tanks for transport of dangerous goods. Service equipment for Tanks. Manhole cover assembly
ONORM EN ISO 16135 : 2008 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
DIN EN ISO 21787 E : 2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
DIN EN 12952-14 E : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION
DIN EN ISO 16138:2006-06 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
DIN EN 13789:2010-09 Industrial valves - Cast iron globe valves
DIN EN ISO 16136:2006-06 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
DIN EN ISO 16137:2006-06 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
DIN EN ISO 16139:2006-06 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
DIN EN 14596 E : 2005 TANKS FOR TRANSPORT OF DANGEROUS GOODS SERVICE EQUIPMENT FOR TANKS - EMERGENCY PRESSURE RELIEF VALVE
DIN EN 13774:2013-05 VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
DIN EN 14433 E : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - FOOT VALVES
DIN EN 14432 E : 2014 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
BS EN 14512:2006 Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals. Hinged manhole cover and neckrings with pivoting bolts
BS EN 12561-3:2011 Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure
BS EN 13789:2002 Industrial valves. Cast iron globe valves
BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
UNE-EN 13081:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler
ISO 21787:2006 Industrial valves Globe valves of thermoplastics materials
ISO 28921-1:2013 Industrial valves Isolating valves for low-temperature applications Part 1: Design, manufacturing and production testing
BS EN 14341:2006 Industrial valves. Steel check valves
EN 16767:2016 Industrial valves - Steel and cast iron check valves
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN ISO 16137:2006 Industrial valves. Check valves of thermoplastic materials
UNE-EN 13083:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Adaptor for bottom loading and unloading
BS EN ISO 21787:2006 Industrial valves. Globe valves of thermoplastics materials
UNE-EN 1074-6:2011 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
BS EN 13081 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR COLLECTION ADAPTOR AND COUPLER
UNE-EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
BS EN 13083 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - ADAPTOR FOR BOTTOM LOADING AND UNLOADING
BS EN 12952-14:2004 Water-tube boilers and auxiliary installations Requirements for flue gas DENOX-systems using liquified pressurized ammonia and ammonia water solution
BS EN 14432:2014 Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Product discharge and air inlet valves
UNE-EN 13082:2009 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
UNE-EN 14564:2013 Tanks for transport of dangerous goods - Terminology
UNE-EN 12561-3:2012 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
BS EN 12569:1999 Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
ISO 16137:2006 Industrial valves Check valves of thermoplastics materials
ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
BS EN ISO 16136:2006 Industrial valves. Butterfly valves of thermoplastic materials
UNE-EN 488:2012 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
UNE-EN 12266-2:2013 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
ISO 16139:2006 Industrial valves Gate valves of thermoplastics materials
BS EN 488:2015 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 1983:2013 Industrial valves. Steel ball valves
BS EN 13082 : 2008 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR TRANSFER VALVE
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS EN 12516-2:2014 Industrial valves. Shell design strength Calculation method for steel valve shells
BS EN 1074-6:2008 Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications
BS EN 12266-2:2012 Industrial valves. Testing of metallic valves Tests, test procedures and acceptance criteria. Supplementary requirements
DIN EN ISO 21787:2006-06 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
EN 14512 : 2006 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS - HINGED MANHOLE COVERS AND NECKRINGS WITH PIVOTING BOLTS
EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
EN 16678:2015 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 15208:2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
EN 13709:2010 Industrial valves - Steel globe and globe stop and check valves
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN 14432:2014 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
EN 16257:2012 Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom)
EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
EN 1983:2013 Industrial valves - Steel ball valves
EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
EN 14595:2016 Tanks for transport of dangerous goods - Service equipment - Breather device
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 1984:2010 Industrial valves - Steel gate valves
EN 13789:2010 Industrial valves - Cast iron globe valves
EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
EN 14564:2013 Tanks for transport of dangerous goods - Terminology
EN 14433:2014 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves
EN 16249:2013 Tanks for the transport of dangerous goods - Service equipment - Cap for the adaptor for bottom loading and unloading
EN 593:2017 Industrial valves - Metallic butterfly valves for general purposes
EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
EN 14341:2006 Industrial valves - Steel check valves
EN 14267:2004/AC:2008 IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
13/30287824 DC : 0 BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
09/30205886 DC : 0 BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
BS EN 16249:2013 Tanks for the transport of dangerous goods. Service equipment. Cap for the adaptor for bottom loading and unloading
17/30341741 DC : 0 BS EN 13317 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY
08/30187521 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
I.S. EN 16257:2012 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM)
11/30243885 DC : 0 BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
PREN 14595 : DRAFT 2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - PRESSURE AND VACUUM BREATHER DEVICE
09/30202313 DC : 0 BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
16/30339483 DC : 0 BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
10/30227098 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
UNI EN 16257 : 2012 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - FOOTVALVE SIZES OTHER THAN 100 MM DIA (NOM)
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
DIN EN 16767:2016-08 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
12/30259217 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
14/30302782 DC : 0 BS ISO 5208 - INDUSTRIAL VALVES - PRESSURE TESTING OF METALLIC VALVES
UNE-EN ISO 28921-1:2018 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013)
10/30234321 DC : DRAFT DEC 2010 BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
EN 14596:2005 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve
04/30118758 DC : DRAFT AUG 2004 PREN 12304 - INDUSTRIAL VALVES - STEEL PLUG VALVES
DIN EN 14564:2013-04 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TERMINOLOGY
DIN EN 16678:2016-02 Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
UNE-EN 12972:2015 Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks
PREN 14432 : DRAFT 2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS AND LIQUEFIED GASES - PRODUCT DISCHARGE AND AIR INLET VALVES
I.S. EN 16249:2013 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT - CAP FOR THE ADAPTOR FOR BOTTOM LOADING AND UNLOADING
PREN 17110 : DRAFT 2017 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - VAPOUR MANIFOLD VENT VALVE
I.S. EN 16678:2015 SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
16/30348709 DC : 0 BS EN 17070 - INDUSTRIAL VALVES - MINIMUM PERFORMANCE REQUIREMENTS
UNI EN 13317 : 2007 TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - MANHOLE COVER ASSEMBLY
PREN 488 : DRAFT 2018 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
ONORM EN ISO 21787 : 2008 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
DIN EN 12561-3:2011-10 Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
UNE-EN 1171:2016 Industrial valves - Cast iron gate valves
BS EN 14433:2014 Tanks for the transport of dangerous goods. Tank equipment for the transport of liquid chemicals and liquefied gases. Foot valves
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
ISO 16138:2006 Industrial valves Diaphragm valves of thermoplastics materials
EN 1074-6:2008 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
EN 1171:2015 Industrial valves - Cast iron gate valves
EN 12561-3:2011/AC:2014 RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE
DIN EN 12266-2:2012-04 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
DIN EN 14512:2006-10 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TANK EQUIPMENT FOR THE TRANSPORT OF LIQUID CHEMICALS - HINGED MANHOLE COVERS AND NECK RINGS WITH PIVOTING BOLTS
UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

EN 1349:2009 Industrial process control valves
ISO 9393-2:2005 Thermoplastics valves for industrial applications Pressure test methods and requirements Part 2: Test conditions and basic requirements
EN 764-1:2015+A1:2016 Pressure equipment - Part 1: Vocabulary
ISO 9393-1:2004 Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General
EN 736-2:2016 Valves - Terminology - Part 2: Definition of components of valves
EN 736-3:2008 Valves - Terminology - Part 3: Definition of terms
ISO 5208:2015 Industrial valves Pressure testing of metallic valves
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.