EN 12560-1:2001

Current

Current The latest, up-to-date edition.

Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts

Available format(s):

Language(s):

Published date: 24-01-2001

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
   3.1 DN
   3.2 NPS
   3.3 Class
4 Designations
   4.1 Range of Class designations
   4.2 Range of gasket sizes
   4.3 Gasket types
   4.4 Information to be supplied by the purchaser
5 Gasket designs and materials
6 Gasket types
7 Range of nominal sizes
8 Dimensions
   8.1 Thickness
   8.2 Diameters
   8.3 Tolerances
9 Marking
Annex A (informative) A-deviations

Abstract - (Show below) - (Hide below)

This standard specifies the dimensions, types, design, materials and marking requirements of non-metallic flat gaskets with or without inserts, for use with flanges complying with EN 1759-1, EN 1759-3 and EN 1759-4, for Class designations 150, 300, 600 and 900 for sizes up to and including NPS 24 (DN600).

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 74
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NF EN 12560-1 : 2001	Identical
NEN EN 12560-1 : 2001	Identical
UNE-EN 12560-1:2001	Identical
NBN EN 12560-1 : 2001	Identical
UNI EN 12560-1 : 2003	Identical
SN EN 12560-1 : 2001	Identical
PN EN 12560-1 : 2002	Identical
BS EN 12560-1:2001	Identical
NBN EN 1594 : 2013	Identical
DIN EN 12560-1:2001-04	Identical
NS EN 12560-1 : 1ED 2001	Identical
I.S. EN 12560-1:2001	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

UNI EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 1474-1:2008	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
PREN 13555 : DRAFT 2011	FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
18/30369304 DC : DRAFT APR 2018	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
DIN EN 12007-3:2015-07	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL
DIN EN 1759-1:2005-02	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
DIN EN 1473:2016-10	Installation and equipment for liquefied natural gas - Design of onshore installations
BS EN 14772:2005	Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
EN 12560-2:2013	Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
06/30150265 DC : 0	EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
DIN EN 15001-1:2011-02	Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
DIN EN 1594:2013-12	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
DIN EN 14772 E : 2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS
BS EN 1473:2016	Installation and equipment for liquefied natural gas. Design of onshore installations
I.S. EN 14772:2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
I.S. EN 1594:2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
DIN EN 1473:1997-11	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN 14772:2005	Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
I.S. EN 12560-2:2013	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
I.S. EN 13555:2014	FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
I.S. EN 1473:2016	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
EN 13555:2014	Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
I.S. EN 12007-3:2015	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
VDI 2200:2007-06	Tight flange connections - Selection, calculation, design and assembly of bolted flange connections
PREN 1594 : DRAFT 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
DIN EN 1474-1:2009-03	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
12/30247799 DC : DRAFT JAN 2012	BS EN 12560-2 - FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
PREN 1473 : DRAFT 2018	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
03/114555 DC : DRAFT SEP 2003	EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
13/30258750 DC : 0	BS EN 12007-3 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
EN 1473:2016	Installation and equipment for liquefied natural gas - Design of onshore installations
11/30248108 DC : 0	BS EN 13555 - FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS
NF EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
DIN 30690-1:2016-04	CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS
BS EN 1594:2013	Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
EN 1474-1:2008	Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 12560-2 : 2013	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
UNI EN 1594 : 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
UNI EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
BS EN 1474-1:2008	Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
I.S. EN 15001-1:2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
NF EN 14772 : 2005	FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560
BS EN 13555:2014	Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
BS EN 1759-3:2003	Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
UNE-EN 15001-1:2010	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 12560-2:2013	Flanges and their joints. Dimensions of gaskets for Class-designated flanges Spiral wound gaskets for use with steel flanges
UNE-EN 1594:2014	Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
BS EN 1759-1:2004	Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
BS EN 12007-3:2000	Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel
UNE-EN 12007-3:2015	Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
EN 15001-1:2009	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 1759-1:2004	Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
EN 1594:2013	Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
EN 1759-3:2003/AC:2004	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
13/30271116 DC : 0	BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
BS EN 15001-1:2009	Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
14/30297213 DC : 0	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
PREN 12007-3 : DRAFT 2013	GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL
DIN EN 13555:2014-07	Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
DIN EN 12560-2:2013-12	Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
DIN EN 1759-3:2004-10	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
EN 12007-3:2015	Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel
DIN EN 14772:2005-04	Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
UNI EN 13555 : 2014	FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS

Standards Referencing This Book - (Show below) - (Hide below)

ISO 6708:1995	Pipework components Definition and selection of DN (nominal size)
EN ISO 6708:1995	Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
PREN 1759-3 : DRAFT 94	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY AND COMPOSITE FLANGES

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart