EN 12927-6 : 2004

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 6: DISCARD CRITERIA

Available format(s):

Superseded date: 18-02-2022

Language(s):

Published date: 12-01-2013

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 General requirements
   5.1 Application of this standard
   5.2 Safety principle
6 Discard criteria
   6.1 Main body of rope (and long splice)
   6.2 Rope at end fixing
Annex A (informative) A-deviations
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2000/9/EC relating to cableway installations
         designed to carry persons

Abstract - (Show below) - (Hide below)

Defines the safety requirements applicable to discard criteria for steel ropes for passenger transportation by rope.

General Product Information - (Show below) - (Hide below)

Committee	TC 242
Development Note	Supersedes PREN 12927-6. (10/2005)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	ÖNORM EN 12927: 2019 07 15 EN 12927:2019
Supersedes	PREN 12927-6 : DRAFT 1999

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
SN EN 12927-6 : 2005	Identical
UNE-EN 12927-6:2006	Identical
NEN EN 12927-6 : 2004	Identical
NBN EN 12927-6 : 2004	Identical
PN EN 12927-6 : 2006	Identical
BS EN 12927-6:2004	Identical
I.S. EN 12927-6:2004	Identical
NS EN 12927-6 : 1ED 2005	Identical
UNI EN 12927-6 : 2005	Identical
DIN EN 12927-6:2005-06	Identical
NF EN 12927-6 : 2004	Identical
UNE-EN 12927-6:2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CEN/TR 14819-2:2005	Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations
EN 1709:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
12/30260958 DC : 0	BS EN 12397 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION
EN 15567-1:2015	Sports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
DIN EN 12927-4:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
BS EN 12927-3:2004	Safety requirements for cableways installation designed to carry persons. Ropes. Long splicing of 6 strand hauling, carrying hauling and towing ropes
BS EN 12927-7:2004	Safety requirments for cableways installations designed to carry persons. Ropes Inspection, repair and maintenance
EN 12927-1 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
EN 12927-3 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES
EN 12927-4 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
EN 12408:2004	Safety requirements for cableway installations designed to carry persons - Quality assurance
EN 12927-2 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS
PREN 13243 : DRAFT 2013	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
13/30277128 DC : 0	BS EN 1709 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
13/30277125 DC : 0	BS EN 1908 - SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
PREN 1908 : DRAFT 2013	SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES
PREN 13107 : DRAFT 2013	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
I.S. CEN TR 14819-2:2006	SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS
I.S. EN 12927-1:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
I.S. EN 12927-8:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 8: MAGNETIC ROPE TESTING (MRT)
I.S. EN 12927-3:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES
DIN EN 12408:2005-06	Safety requirements for cableway installations designed to carry persons - Quality control
DIN EN 12927-5:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING
DIN EN 12927-7:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE
DIN EN 12927-1:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
BS EN 12927-8:2004	Safety requirements for cableways installation designed to carry persons. Ropes Magnetic rope testing (MRT)
BS EN 15567-1:2015	Sports and recreational facilities. Ropes courses Construction and safety requirements
PD CEN/TR 14819-2:2005	Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations
13/30275585 DC : 0	BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
12/30260955 DC : 0	BS EN 13796-1 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
17/30358090 DC : 0	BS EN 1709 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION
I.S. EN 12927-4:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
UNE-EN 12927-7:2006	Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance
PREN 13796-1 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS
PREN 13223 : DRAFT 2013	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
13/30277113 DC : 0	BS EN 13223 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT
PREN 1709 : DRAFT 2017	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION
13/30277110 DC : 0	BS EN 13243 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
I.S. EN 12927-7:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE
I.S. EN 12927-5:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING
I.S. EN 12927-2:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS
BS EN 12927-1:2004	Safety requirements for cableways installation designed to carry persons. Ropes Selection criteria for ropes and their end fixing
BS EN 12927-2:2004	Safety requirements for cableway installations designed to carry persons. Ropes Safety factors
BS EN 12927-5:2004	Safety requirements for cableway installations designed to carry person. Ropes Storage, transportation, installation and tensioning
BS EN 12408:2004	Safety requirements for cableways installations designed to carry person. Quality control
I.S. EN 15567-1:2015	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
I.S. EN 1709:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
DIN EN 1709:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
BS EN 1709:2004	Safety requirements for cableways for cableway installations designed to carry persons. Precommissioning inspection, maintenance and operational inspection and checks
DIN EN 12927-2:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS
DIN EN 12927-8:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 8: MAGNETIC ROPE TESTING (MRT)
DIN EN 12927-3:2005-06	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES
BS EN 12927-4:2004	Safety requirements for cableway installations designed to carry person. Ropes End fixings
DIN EN 15567-1:2015-08	SPORTS AND RECREATIONAL FACILITIES - ROPES COURSES - PART 1: CONSTRUCTION AND SAFETY REQUIREMENTS
EN 12927-5 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING
EN 12927-7 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE
EN 12927-8 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 8: MAGNETIC ROPE TESTING (MRT)

Standards Referencing This Book - (Show below) - (Hide below)

EN 12397:2017	Safety requirements for cableway installations designed to carry persons - Operation
EN 12929-1:2015	Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations
EN 12930:2015	Safety requirements for cableway installations designed to carry persons - Calculations
EN 13223:2015	Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment
PREN 1907 : DRAFT 2014	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TERMINOLOGY
EN 12408:2004	Safety requirements for cableway installations designed to carry persons - Quality assurance
EN 12929-2:2015	Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes
PREN 13796-1 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS
EN 12927-1 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS
EN 1909:2017	Safety requirements for cableway installations designed to carry persons - Recovery and evacuation
PREN 13796-2 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS
EN 12927-2 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 2: SAFETY FACTORS
EN 12927-7 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 7: INSPECTION, REPAIR AND MAINTENANCE
2000/9/EC : 2000	DIRECTIVE 2000/9/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 20 MARCH 2000 RELATING TO CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS
EN 12927-4 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 4: END FIXINGS
EN 12927-3 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 3: LONG SPLICING OF 6 STRAND HAULING, CARRYING HAULING AND TOWING ROPES
EN 1709:2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION, MAINTENANCE, OPERATIONAL INSPECTION AND CHECKS
EN 12927-5 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION AND TENSIONING
EN 13243:2015	Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems
EN 12927-8 : 2004	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES - PART 8: MAGNETIC ROPE TESTING (MRT)
EN 1908:2015	Safety requirements of cableway installations designed to carry persons - Tensioning devices
PREN 13796-3 : DRAFT 2012	SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart