|
EN 10253-1:1999
|
Butt-welding pipe fittings - Part 1: Wrought carbon steel for general use and without specific inspection requirements |
|
ISO/TR 20172:2009
|
Welding Grouping systems for materials European materials |
|
EN 12953-5:2002
|
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of the boiler |
|
EN ISO 8494:2013
|
Metallic materials - Tube - Flanging test (ISO 8494:2013) |
|
EN 14394:2005+A1:2008
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
|
EN ISO 8493 : 2004
|
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
|
EN 1515-1:1999
|
Flanges and their joints - Bolting - Part 1: Selection of bolting |
|
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
|
EN 10028-1:2017
|
Flat products made of steels for pressure purposes - Part 1: General requirements |
|
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes |
|
EN 12953-6:2011
|
Shell Boilers - Part 6: Requirements for equipment for the boiler |
|
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
|
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
|
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
|
EN 1503-3:2000/AC:2001
|
VALVES - MATERIALS FOR BODIES, BONNETS AND COVERS - PART 3: CAST IRONS SPECIFIED IN EUROPEAN STANDARDS |
|
ISO/TR 15608:2017
|
Welding Guidelines for a metallic materials grouping system |
|
EN 1503-1:2000
|
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
|
ISO 8493:1998
|
Metallic materials Tube Drift-expanding test |
|
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
|
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
|
EN 12953-1:2012
|
Shell boilers - Part 1: General |
|
EN 1515-2:2001
|
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
|
EN 12953-3:2016
|
Shell boilers - Part 3: Design and calculation for pressure parts |
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
|
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
|
EN 1515-4:2009
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties |
|
EN 10204:2004
|
Metallic products - Types of inspection documents |
|
CEN ISO/TR 15608:2017
|
Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
|
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
ISO 9001:2015
|
Quality management systems — Requirements |
|
EN 1563:2011
|
Founding - Spheroidal graphite cast irons |
|
EN 12074:2000
|
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
|
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
EN 1515-3:2005
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
|
ISO 8494:2013
|
Metallic materials Tube Flanging test |
|
EN 10220:2002
|
Seamless and welded steel tubes - Dimensions and masses per unit length |
|
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
|
CEN ISO/TR 20172:2009
|
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009) |
|
EN 764-4:2014
|
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
|
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
|
EN 10217-1:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
|
EN 10217-5:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
|
EN 13479:2017
|
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials |
|
EN 1561:2011
|
Founding - Grey cast irons |
|
EN 10222-1:2017
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |