EN 13130-3:2004
Current
The latest, up-to-date edition.
Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 3: Determination of acrylonitrile in food and food simulants
26-05-2004
Foreword
1 Scope
2 Normative references
3 Principle
4 Reagents
5 Apparatus
6 Samples
6.1 Laboratory samples
6.2 Test sample preparation
7 Procedure
7.1 GC preparation
7.2 Performance of GC measurements
8 Expression of results
8.1 General
8.2 Method of calculation
8.3 Precision data and detection limit
9 Confirmation
9.1 Requirement for confirmation
9.2 Confirmation by combined gas chromatography-mass
spectrometry
9.3 Confirmation by re-analysis on a GC column of
different polarity
10 Test report
Annex A (normative) Method of standard addition
Annex B (normative) Calibration via external standardization
Annex C (normative) Manual sample injection
Bibliography
This part of this European Standard specifies a method for the determination of acrylonitrile monomer in foods and food simulants. The method is applicable to aqueous food simulants, to the fatty food simulant olive oil and other fatty food simulants, simulants D, e.g. a mixture of synthetic triglycerides or sunflower oil or corn oil, as well as to liquid and solid foodstuffs such as beverages and soft margarine. The level of acrylonitrile monomer determined is expressed as milligrammes of acrylonitrile per kilogram of food or food simulant.The method is appropriate for the quantitative determination of acrylonitrile monomer at minimum levels of down to 0,01 mg/kg to 0,005 mg/kg, or lower, in food simulant, depending on the applied test conditions (see NOTE in 8.2.3). With regard to the performance in the mentioned foodstuffs, in general, a direct detection limit of 0,02 mg/kg is achievable.NOTEThis method was developed for the determination of acrylonitrile in 15 % v/v aqueous ethanol, as required by the regulations in force at the time the development work was carried out. However, this method, developed for 15 (v/v) aqueous ethanol, should be applicable to the determination in 10 (v/v) aqueous ethanol.
Committee |
CEN/TC 194
|
DevelopmentNote |
To be read in conjunction with EN 13130-1. (06/2004) Supersedes ENV 13130-3. (03/2005)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 13130-3:2004 | Identical |
NF EN 13130-3 : 2004 | Identical |
UNI EN 13130-3 : 2005 | Identical |
UNE-EN 13130-3:2005 | Identical |
SN EN 13130-3 : 2004 | Identical |
NEN EN 13130-3 : 2004 | Identical |
DIN EN 13130-3:2004-08 | Identical |
I.S. EN 13130-3:2004 | Identical |
NBN EN 13130-3 : 2004 | Identical |
PN EN 13130-3 : 2007 | Identical |
NS EN 13130-3 : 1ED 2004 | Identical |
CEN/TR 15623:2008 | Food processing machinery - Route map - Materials for food area |
S.R. CEN TR 15623:2008 | FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA |
PD CEN/TR 15623:2008 | Food processing machinery. Route map. Materials for food area |
EN 13130-1:2004 | Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 1: Guide to test methods for the specific migration of substances from plastics to foods and food simulants and the determination of substances in plastics and the selection of conditions of exposure to food simulants |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.