EN 13137:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
04-10-2017
29-08-2001
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Interferences
6 Hazards
7 Reagents
8 Equipment
9 Sample storage
10 Procedure method A (indirect method)
11 Procedure method B (direct method)
12 Performance characteristics
13 Test report
Annex A (informative) Additional results of inter-laboratory
tests
This European Standard specifies two methods for the determination of total organic carbon (TOC) in undried waste samples containing more than 1 g carbon per kg of dry matter (0,1 %).This standard can be applied as well to sludges, sediments and comparable materials.When present, elemental carbon, carbides, cyanides, cyanates, isocyanates, isothiocyanates and thiocyanates are determined as organic carbon using the methods described in this standard. An interpretation of the measured value may therefore be problematical in cases where the waste contains relevant levels of the above mentioned components. If needed, these components shall be determined separately by means of a suitable validated procedure and be recorded in the test report.NOTEAt the time of publication of this European Standard a standardized procedure for determination of elemental carbon in waste is not available.
Committee |
CEN/TC 444
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
BS EN 13137:2001 | Identical |
I.S. EN 13137:2001 | Identical |
UNI EN 13137 : 2002 | Identical |
NF EN 13137 : 2001 | Identical |
SN EN 13137 : 2001 | Identical |
UNE-EN 13137:2002 | Identical |
NS EN 13137 : 1ED 2001 | Identical |
PN EN 13137 : 2004 | Identical |
NEN EN 13137 : 2001 | Identical |
DIN EN 13137:2001-12 | Identical |
NBN EN 13137 : 2001 | Identical |
ISO 16620-2:2015 | Plastics Biobased content Part 2: Determination of biobased carbon content |
BS EN 15357:2011 | Solid recovered fuels. Terminology, definitions and descriptions |
DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
PD CEN/TR 16376:2012 | Characterization of waste. Overall guidance document for characterization of waste from the extractive industries |
I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
I.S. EN 16575:2014 | BIO-BASED PRODUCTS - VOCABULARY |
I.S. EN 15936:2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
UNE-EN 16575:2015 | Bio-based products - Vocabulary |
UNI CEN/TS 16137 : 2011 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
S.R. CEN/TS 16675:2014 | CHARACTERISATION OF WASTE - TEST METHODS FOR THE DETERMINATION OF THE MONOLITHIC STATUS OF WASTE |
EN 15357:2011 | Solid recovered fuels - Terminology, definitions and descriptions |
CEN/TS 16295:2012 | Plastics - Declaration of the bio-based carbon content |
CEN/TR 16376:2012 | Characterization of waste - Overall guidance document for characterization of waste from the extractive industries |
CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
CEN/TS 15357:2006 | Solid recovered fuels - Terminology, definitions and descriptions |
DIN EN 15936:2012-11 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
05/30080462 DC : DRAFT MAY 2005 | BS ISO 23161 - SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
13/30277801 DC : 0 | BS EN 16575 - BIO-BASED PRODUCTS - VOCABULARY |
UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
DIN EN ISO 23161:2011-10 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD (ISO 23161:2009) |
DD CEN/TS 15357:2006 | Solid recovered fuels. Terminology, definitions and descriptions |
UNE-EN 15357:2012 | Solid recovered fuels - Terminology, definitions and descriptions |
UNE-EN 16718:2016 | Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products |
S.R. CEN/TS 16137:2011 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
I.S. EN ISO 23161:2011 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
S.R. CEN/TR 16376:2012 | CHARACTERIZATION OF WASTE - OVERALL GUIDANCE DOCUMENT FOR CHARACTERIZATION OF WASTE FROM THE EXTRACTIVE INDUSTRIES |
ISO 23161:2009 | Soil quality Determination of selected organotin compounds Gas-chromatographic method |
17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
UNE-EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
I.S. EN 15002:2015 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
VDI 4630:2016-11 | Fermentation of organic materials - Characterization of the substrate, sampling, collection of material data, fermentation tests |
BS ISO 16620-1:2015 | Plastics. Biobased content General principles |
BS EN 15875:2011 | Characterisation of waste. Static test for determination of acid potential and neutralisation potential of sulfidic waste |
DIN EN 15357:2011-05 | Solid recovered fuels - Terminology, definitions and descriptions |
07/30136783 DC : 0 | BS ISO 5667-17 - WATER QUALITY - SAMPLING - PART 17: GUIDANCE ON SAMPLING OF BULK SUSPENDED SOLIDS |
UNI EN 15936 : 2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
BS EN 16575:2014 | Bio-based products. Vocabulary |
DIN EN 16575 E : 2014 | BIO-BASED PRODUCTS - VOCABULARY |
BS ISO 16620-4:2016 | Plastics. Biobased content Determination of biobased mass content |
14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
UNE-CEN/TS 16137:2012 EX | Plastics - Determination of bio-based carbon content |
PD CEN/TS 16675:2014 | Characterisation of waste. Test methods for the determination of the monolithic status of waste |
UNI EN 16575 : 2014 | BIO-BASED PRODUCTS - VOCABULARY |
I.S. EN 16718:2015 | WOOD AND WOOD BASED PRODUCTS - DOSAGE OF THE TOTAL ORGANIC CARBON (TOC) IN WOOD AND WOOD BASED PRODUCTS |
ISO 16620-4:2016 | Plastics — Biobased content — Part 4: Determination of biobased mass content |
15/30329101 DC : 0 | BS EN 16907-6 - EARTHWORKS - PART 6: LAND RECLAMATION WITH DREDGED HYDRAULIC FILL |
CEN/TS 16675:2014 | Characterisation of waste - Test methods for the determination of the monolithic status of waste |
14/30295252 DC : 0 | BS EN 16718 - WOOD PRESERVATIVES AND WOOD BASED PRODUCTS - DOSAGE OF THE TOTAL ORGANIC CARBON (TOC) IN WOOD AND WOOD BASED PRODUCTS |
17/30362321 DC : 0 | BS EN ISO 23161 - SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
BS EN 15936:2012 | Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion |
15/30291640 DC : 0 | BS ISO 16620-4 - PLASTICS - BIOBASED CONTENT - PART 4: DETERMINATION OF THE BIOBASED MASS CONTENT |
I.S. EN 15875:2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
DIN EN 15875:2012-11 | Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste (includes Corrigendum :2012) |
UNI EN 15357 : 2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
12/30263896 DC : 0 | BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
DD CEN/TS 16137:2011 | Plastics. Determination of bio-based carbon content |
UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
BS EN 16718:2015 | Wood and wood based products. Dosage of the total organic carbon (TOC) in wood and wood based products |
UNI EN 15875 : 2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
UNI CEN/TS 16675 : 2014 | CHARACTERISATION OF WASTE - TEST METHODS FOR THE DETERMINATION OF THE MONOLITHIC STATUS OF WASTE |
UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
EN ISO 23161:2011 | Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO 23161:2009) |
BS ISO 16620-2:2015 | Plastics. Biobased content Determination of biobased carbon content |
UNI EN ISO 23161 : 2011 | SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
ISO 16620-1:2015 | Plastics Biobased content Part 1: General principles |
PREN 16907-6 : DRAFT 2015 | EARTHWORKS - PART 6: LAND RECLAMATION WITH DREDGED HYDRAULIC FILL |
13/30291099 DC : 0 | BS EN 15002 - CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
DIN EN 15002:2015-07 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
EN 16718:2015 | Wood and wood based products - Dosage of the total organic carbon (TOC) in wood and wood based products |
EN 15936:2012 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
EN 16575:2014 | Bio-based products - Vocabulary |
09/30199768 DC : 0 | BS EN 15936 - SLUDGE, WASTE, TREATED BIOWASTE AND SOIL - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
DIN EN 16718:2016-02 | WOOD AND WOOD-BASED PRODUCTS - DOSAGE OF THE TOTAL ORGANIC CARBON (TOC) IN WOOD AND WOOD BASED PRODUCTS |
DIN EN 16575:2014-10 | BIO-BASED PRODUCTS - VOCABULARY |
PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
14/30291633 DC : 0 | BS ISO 16620-2 - PLASTICS - BIOBASED CONTENT - PART 2: DETERMINATION OF BIOBASED CARBON CONTENT |
PD CEN/TR 16721:2014 | Bio-based products. Overview of methods to determine the bio-based content |
DIN EN 16457 E : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
07/30169751 DC : 0 | BS ISO 23161 - SOIL QUALITY - DETERMINATION OF SELECTED ORGANOTIN COMPOUNDS - GAS-CHROMATOGRAPHIC METHOD |
S.R. CEN/TS 16295:2012 | PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT |
NF EN 15875 : 2011 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
BS EN 16457:2014 | Characterization of waste. Framework for the preparation and application of a testing programme. Objectives, planning and report |
S.R. CEN/TR 16721:2014 | BIO-BASED PRODUCTS - OVERVIEW OF METHODS TO DETERMINE THE BIO-BASED CONTENT |
UNE-EN 15875:2012 | Characterization of waste - Static test for determination of acid potential and neutralisation potential of sulfidic waste |
08/30189276 DC : 0 | BS EN 15875 - CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL OF SULFIDIC WASTE |
UNI CEN/TS 16295 : 2012 | PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT |
BS EN ISO 23161:2011 | Soil quality. Determination of selected organotin compounds. Gas-chromatographic method |
I.S. EN 15357:2011 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
I.S. CEN TS 15357:2006 | SOLID RECOVERED FUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
BS EN 15002:2015 | Characterization of waste. Preparation of test portions from the laboratory sample |
CEN/TR 16721:2014 | Bio-based products - Overview of methods to determine the bio-based content |
CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
EN 12880:2000 | Characterization of sludges - Determination of dry residue and water content |
ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
ISO 8466-1:1990 | Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.