EN 13274-1:2001
Current
Current
The latest, up-to-date edition.
Respiratory protective devices - Methods of test - Part 1: Determination of inward leakage and total inward leakage
Published date
24-01-2001
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Prerequisites
5 General test requirements
6 Principle
7 Material permeability test
8 Device preparation
9 Test
Annex A (normative) Test results - Uncertainty of
measurement
Annex ZA (informative) Clauses of this European
Standard addressing essential requirements
or other provisions of EU Directives
This draft European Standard specifies the general procedure for determining: (i) the inward leakage of facepieces or (ii) inward leakage of respiratory protective devices (RPD), which is the total inward leakage excluding any filter penetration or (iii) total inward leakage of respiratory protective devices. Sample preparation, selection of test subjects, test procedure and the method of calculation of leakage are included. Two methods are described, one using an aerosol (sodium chloride aerosol) and one using a gas (sulfur hexafluoride).
| Committee |
CEN/TC 79
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 13274-1:2001 | Identical |
| I.S. EN 13274-1:2001 | Identical |
| PN EN 13274-1 : 2004 | Identical |
| NS EN 13274-1 : 1ED 2001 | Identical |
| NF EN 13274-1 : 2001 | Identical |
| GOST R EN 13274-1 : 2009 | Identical |
| NEN EN 13274-1 : 2001 | Identical |
| SN EN 13274-1 : 2001 | Identical |
| UNI EN 13274-1 : 2002 | Identical |
| UNE-EN 13274-1:2001 | Identical |
| NBN EN 13274-1 : 2001 | Identical |
| DIN EN 13274-1:2001-04 | Identical |
| DIN EN 14594:2005-07 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14593-1:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 14593-1:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| EN 13794:2002 | Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing, marking |
| PREN 14593-1 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK- REQUIREMENTS, TESTING AND MARKING |
| 17/30348247 DC : 0 | BS EN 14593-1 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING |
| 02/565105 DC : DRAFT DEC 2002 | BS EN 14593-1 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| PREN 14594 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 1146:2005-12 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| DIN EN 14593-2:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 403:2004 | RESPIRATORY PROTECTIVE FOR SELF-RESCUE FILTERING DEVICES WITH HOOD FOR SELF-RESCUE FROM FIRE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 402:2003 | RESPIRATORY PROTECTIVE DEVICES - LUNG GOVERNED DEMAND SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK OR MOUTHPIECE ASSEMBLY FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14593-2:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 1146:2005 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATING A HOOD FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| PREN 12941 : DRAFT 2016 | RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING |
| 17/30348244 DC : 0 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| ONORM EN 14594 : 2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 13794:2002 | RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| 02/565107 DC : DRAFT DEC 2002 | BS EN 14594 - RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| BS EN 14593-1:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking |
| BS EN 13794:2002 | Respiratory protective devices. Self-contained closed-circuit breathing apparatus for escape. Requirements, testing, marking |
| BS EN 1146:2005 | Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking |
| BS EN 402:2003 | Respiratory protective devices. Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape. Requirements, testing, marking |
| BS EN 403:2004 | Respiratory protective devices for self-rescue. Filtering devices with hood for escape from fire. Requirements, testing, marking |
| BS EN 14593-2:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a half mask at positive pressure. Requirements, testing, marking |
| EN 402:2003 | Respiratory protective devices - Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape - Requirements, testing, marking |
| EN 14593-2:2005 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking |
| BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
| ONORM EN 14593-1 : 2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| 02/565106 DC : DRAFT DEC 2002 | BS EN 14593-2 - RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| 02/561344 DC : DRAFT MAR 2002 | BS EN 1146 - RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS INCORPORATION A HOOD FOR ESCAPE (COMPRESSED AIR ESCAPE APPARATUS WITH HOOD) - REQUIREMENTS, TESTING, MARKING |
| EN 14593-1:2018 | Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking |
| DIN EN 403:2004-08 | Respiratory protective devices for self-rescue - Filtering devices with hood for escape from fire - Requirements, testing, marking |
| DIN EN 402:2003-09 | LUNG GOVERNED DEMAND SELF-CONTAINED OPEN-CIRCUIT COMPRESSED BREATHING APPARATUS WITH FULL-FACE MASK OR MOUTHPIECE ASSEMBLY FOR ESCAPE - REQUIREMENTS, TESTING, MARKING |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.