EN 13355:2004+A1:2009

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Coating plants - Combined booths - Safety requirements

Available format(s):

Superseded date: 30-06-2019

Language(s):

Published date: 01-04-2009

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
  4.1 General
  4.2 Mechanical hazards
  4.3 Electrical hazards
  4.4 Thermal hazards
  4.5 Hazards generated by noise
  4.6 Hazards generated by radiation
  4.7 Hazards resulting from dangerous substances
  4.8 Fire and explosion hazards
  4.9 Hazards caused by failure of the energy supply
       and malfunction of the control system
  4.10 Hazards caused by emergency stop devices
5 Safety requirements and/or measures
  5.1 General
  5.2 Mechanical
  5.3 Electrical
  5.4 Thermal
  5.5 Noise
  5.6 Radiation
  5.7 Safety requirements against dangerous substances
  5.8 Fire and explosion prevention and protection
  5.9 Failure of energy supply and malfunction of
       the control system
  5.10 Emergency stop devices
6 Verification of the safety measure and/or measures
  6.1 General
  6.2 Mechanical
  6.3 Electrical
  6.4 Thermal
  6.5 Noise
  6.6 Radiation
  6.7 Dangerous substances
  6.8 Fire and explosion
  6.9 Failure of energy supply
  6.10 Emergency stop devices
7 Information for use
  7.1 General
  7.2 Instruction handbook
  7.3 Marking
Annex A (normative) - Determination of concentration
        of flammable solvents in terms of LEL (spraying
        mode)
      A.1 Equations
      A.2 Examples of calculation
Annex B (normative) - Measurement of air velocities
      B.1 Instrumentation
      B.2 Measurement conditions
Annex C (informative) - Classification of material's
        reaction to the fire - National standards
Annex D (informative) - References to national
        exposure limit values
Annex E (informative) - Equivalence between zone
        description and categories of ignition protection
Annex ZA (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC, amended by 98/79/EC
Annex ZB (informative) - Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC
Bibliography

Abstract - (Show below) - (Hide below)

This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 °C and deals with all hazards significant for combined booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).To the extent of this document, a combined booth is considered an assembly of the following equipment:-forced ventilation by one or more fans, -ventilation air heating system (e. g. heat exchanger or burner), -power driven dampers, forced ventilation ducting, -dry air filtering and/or wet air washing systems, -automatic fire extinguishing equipment and additional specific electrical equipment, -control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclosed provided with forced ventilation.-working pit, in special case.This document does not cover:a)booths for automatic spraying, powder spray booths, open booths, and portable heaters.b)design of the building foundations upon which a booth is installed;c)the civil engineering and building design where a booth is constructed as, or to use part of, a new or existing building;d)spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619).This document is not applicable to combined booths which are manufactured before the date of publication of this standard by CEN.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 271
Development Note	2004 Edition Re-Issued in April 2009 & incorporates AMD 1 2009. (04/2009)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN 16985:2018

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NEN EN 13355 : 2005 + A1 2009	Identical
DIN EN 13355:2010-06	Identical
NF EN 13355 : 2005 + A1 2009	Identical
SN EN 13355 : 2005 + A1 2009	Identical
NBN EN 13355 : 2005 + A1 2009	Identical
I.S. EN 13355:2005	Identical
UNI EN 13355 : 2009	Identical
UNE-EN 13355:2005	Identical
BS EN 13355 : 2004	Identical
NS EN 13355 : 2004 + A1 2009	Identical
PN EN 13355 : 2006 + A1 2010	Identical
UNE-EN 13355:2005+A1:2009	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

08/30173506 DC : DRAFT JAN 2008	BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
BS EN 14462:2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
PREN 14462 : DRAFT 2012	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
PREN 1539 : DRAFT 2012	DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
DIN EN 14462 E : 2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
I.S. EN 14462:2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
VDI 3476 Blatt 1:2015-06	Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals
VDI 3456:2009-12	Emission control - Refinishing and finishing of vehicles
VDI 3476 Blatt 2:2010-01	Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes
12/30258755 DC : 0	BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
DIN EN 14462:2015-08	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
UNI EN 12621 : 2010	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 12621:2006	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNE-EN 1539:2010	Dryers and ovens, in which flammable substances are released - Safety requirements
EN 14462:2015	Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
12/30272422 DC : 0	BS EN 14462 - SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3

Standards Referencing This Book - (Show below) - (Hide below)

EN 294:1992/AC:1993	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
ISO 11202:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 1127-1:2011	Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
EN 1539:2015	Dryers and ovens, in which flammable substances are released - Safety requirements
EN 746-1:1997+A1:2009	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 418 : 1992	SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 61000-6-1:2007	Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
EN 982:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
ISO 4871:1996	Acoustics Declaration and verification of noise emission values of machinery and equipment
EN 1037:1995+A1:2008	Safety of machinery - Prevention of unexpected start-up
ISO 14122-3:2016	Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails
ISO 3744:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 14122-1:2016	Safety of machinery Permanent means of access to machinery Part 1: Choice of fixed means and general requirements of access
EN 746-2:2010	Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
EN 1953:2013	Atomising and spraying equipment for coating materials - Safety requirements
EN 1088:1995+A2:2008	Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
EN 61000-6-3:2007/A1:2011/AC:2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN 981:1996+A1:2008	Safety of machinery - System of auditory and visual danger and information signals
ISO/TR 11688-1:1995	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 971-1 : 1996	PAINTS AND VARNISHES - TERMS AND DEFINITIONS FOR COATING MATERIALS - PART 1: GENERAL TERMS
EN 12433-1:1999	Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors
EN 60079-0:2012/A11:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
ISO 9614-1:1993	Acoustics Determination of sound power levels of noise sources using sound intensity Part 1: Measurement at discrete points
EN 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
EN 50053-1 : 1987	REQUIREMENTS FOR THE SELECTION, INSTALLATION AND USE OF ELECTROSTATIC SPRAYING EQUIPMENT FOR FLAMMABLE MATERIALS - HAND-HELD ELECTROSTATIC PAINT SPRAY GUNS WITH AN ENERGY LIMIT OF 0.24 MJ AND THEIR ASSOCIATED APPARATUS
EN 999:1998+A1:2008	Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 13463-1:2009	Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
EN 811 : 1996	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
EN 349:1993+A1:2008	Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 13478:2001+A1:2008	Safety of machinery - Fire prevention and protection
EN 61779-4:2000	Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 3747:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering/survey methods for use in situ in a reverberant environment
IEC 61000-6-1 : 3.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
ISO 10218:1992	Manipulating industrial robots Safety
EN 12635:2002+A1:2008	Industrial, commercial and garage doors and gates - Installation and use
EN 12978:2003+A1:2009	Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 1760-1:1997+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
ISO 9614-2:1996	Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning
EN 1050 : 1996	SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 50050:2006	Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spraying equipment
EN 614-1:2006+A1:2009	Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN 1012-1:2010	Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors
EN ISO 11688-2 : 2000	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 14122-4:2016	Safety of machinery Permanent means of access to machinery Part 4: Fixed ladders
2006/42/EC : 2006 AMD 4 2014	DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 17 MAY 2006 ON MACHINERY, AND AMENDING DIRECTIVE 95/16/EC (RECAST) (TEXT WITH EEA RELEVANCE)
EN 14986:2017	Design of fans working in potentially explosive atmospheres
EN 12445:2000	Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods
EN 574:1996+A1:2008	Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 563:1994/A1:1999/AC:2000	SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
IEC 61000-6-3:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 12433-2:1999	Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors
EN ISO 5167-1:2003	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003)
EN 619:2002+A1:2010	Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
EN 12753:2005+A1:2010	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN ISO 12100-1:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
EN ISO 14122-3:2016	Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)
EN ISO 3747:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
EN ISO 3746:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN ISO 3744:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 953:1997+A1:2009	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
EN 61000-6-4:2007/A1:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 5167-1:2003	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
EN ISO 14122-4:2016	Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)
EN ISO 14122-2:2016	Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016)
IEC 60079-0:2011	Explosive atmospheres - Part 0: Equipment - General requirements
EN 60079-10:2003	Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 12100-2:2003	Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
IEC 61000-6-1:2016	Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
EN ISO 12100-2:2003/A1:2009	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN ISO 9614-2 : 1996	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
EN 61779-1 : 2000 AMD 11 2004	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
IEC 61000-6-4:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
EN 60079-14:2014/AC:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 983:1996+A1:2008	Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 954-1 : 1996	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
EN ISO 3743-1:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010)
ISO 12100-1:2003	Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
EN ISO 4871:2009	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 1760-2:2001+A1:2009	Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
EN 13463-5:2011	Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
EN 60529:1991/AC:2016-12	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
1998/37/EC : 1998	DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
ISO 14122-2:2016	Safety of machinery Permanent means of access to machinery Part 2: Working platforms and walkways
EN 775:1992/AC:1993	MANIPULATING INDUSTRIAL ROBOTS - SAFETY
EN ISO 11688-1:2009	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN ISO 14122-1:2016	Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)
ISO/TR 11688-2:1998	Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
EN ISO 9614-1:2009	Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
EN ISO 11202:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
EN 14462:2015	Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3
EN 61260:1995/A1:2001	ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS
IEC 60079-15:2010	Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
ISO 3743-1:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room
EN 525:2009	Non-domestic direct gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart