EN 13566-2:2005

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes

Available format(s):

Superseded date: 01-02-2018

Language(s):

Published date: 23-11-2005

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and
  abbreviations
  3.1 Terms and definitions
  3.2 Symbols and abbreviations
4 Pipes at the 'M' stage
  4.1 Materials
  4.2 General characteristics
  4.3 Material characteristics
  4.4 Geometrical characteristics
  4.5 Mechanical characteristics
  4.6 Physical characteristics
  4.7 Jointing
  4.8 Marking
5 Fittings at the 'M' stage
  5.1 Requirement for fittings
  5.2 Marking
6 Ancillary components
7 Fitness for purpose of the system for pipes and
  fittings at the 'I' stage
8 Installation practice
  8.1 Preparatory work
  8.2 Storage, handling and transport
  8.3 Equipment
  8.4 Installation
  8.5 Process-related inspection and testing
  8.6 Lining termination
  8.7 Reconnecting to existing manholes and laterals
  8.8 Final inspection and testing
Annex A (informative) Recommended scheme for assessment
                      of conformity
Annex B (normative) Structured-wall pipes used for
                      continuous pipe lining - Specification
                      of layers
Annex C (normative) Structured-wall pipes used for continuous
                      pipe lining - Determination of residual
                      elongation and leaktightness following
                      application and removal of a specified
                      longitudinal pulling force
Annex D (normative) Structured-wall pipes used for continuous
                      pipe lining - Determination of resistance
                      to application of a specified temporary
                      longitudinal bending radius
Bibliography

Abstract - (Show below) - (Hide below)

This Part 2 of EN 13566, read in conjunction with Part 1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of non-pressure drainage and sewerage networks. It covers;-homogeneous-wall (HW) pipes made of polyethylene (PE) or polypropylene (PP),-structured-wall (SW) pipes of the corrugated double-wall type of construction as defined in Annex B, whose structural layer(s) is (are) made of PE or PP,-jointing of pipe lengths by means of butt fusion (HW) ) or electrofusion (SW),-fabricated and injection-moulded fittings made of PE, PP and poly(vinyl chloride) (PVC-U).NOTE The grouting procedure is outside the scope of this standard.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 155
Development Note	To be read in conjunction with EN 13566-1. (03/2006)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN ISO 11296-2:2018

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NBN EN 13566-2 : 2006	Identical
DIN EN 13566-2:2006-02	Identical
NEN EN 13566-2 : 2005	Identical
BS EN 13566-2:2005	Identical
I.S. EN 13566-2:2005	Identical
UNI EN 13566-2 : 2006	Identical
SN EN 13566-2 : 2006	Identical
NS EN 13566-2 : 1ED 2006	Identical
PN EN 13566-2 : OCT 2006	Identical
NF EN 13566-2 : 2006	Identical
UNE-EN 13566-2:2006	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CEN/TR 14920:2005	Jetting resistance of drain and sewer pipes - Moving jet test method
PREN 15885 : DRAFT 2015	CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS
DIN EN 15885:2011-03	CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
PD CEN/TR 14920:2005	Jetting resistance of drain and sewer pipes. Moving jet test method
DIN EN 15885:2016-01 (Draft)	CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
BS EN 15885:2010	Classification and characteristics of techniques for renovation and repair of drains and sewers
16/30332542 DC : 0	BS EN 15885 - CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS
EN 15885:2010	Classification and characteristics of techniques for renovation and repair of drains and sewers
UNI EN ISO 12706 : 2010	NON-DESTRUCTIVE TESTING - PENETRANT TESTING - VOCABULARY
I.S. CEN TR 14920:2005	JETTING RESISTANCE OF DRAIN AND SEWER PIPES - MOVING JET TEST METHOD
UNE-EN 15885:2011	Classification and performance characteristics of techniques for renovation and repair of drains and sewers
I.S. EN 15885:2010	CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
DIN EN ISO 11295:2016-08 (Draft)	CLASSIFICATION AND INFORMATION ON DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION
DIN EN 15885 E : 2011	CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS
UNI EN 15885 : 2011	CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS

Standards Referencing This Book - (Show below) - (Hide below)

EN 1277:2003	Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
EN ISO 3126:2005	Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
EN ISO 9967:2016	Thermoplastics pipes - Determination of creep ratio (ISO 9967:2016)
EN 728:1997	Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
ENV 1852-2 : DRAFT APR 2000	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
EN ISO 527-2:2012	Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
EN 13566-1:2002	Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General
EN ISO 6259-1:2015	Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
ISO 527-2:2012	Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO/TR 11295:1992	Techniques for rehabilitation of pipeline sytems by the use of plastics pipes and fittings
ISO 6259-1:2015	Thermoplastics pipes Determination of tensile properties Part 1: General test method
ISO 3126:2005	Plastics piping systems Plastics components Determination of dimensions
EN 921:1994/AC:1995	PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE
EN 13689 : 2002	GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION
PREN 13476-1 : DRAFT 2015	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLSEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL - PART 1: GENERAL REQUIREMENTS AND PERFORMANCE CHARACTERISTICS
ISO 1183-1:2012	Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
EN 12666-1:2005+A1:2011	Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
EN ISO 9969:2016	Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 744:1995	Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
EN 1401-1:2009	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
ISO 9967:2016	Thermoplastics pipes Determination of creep ratio
ISO 6259-3:2015	Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes
EN ISO 1133:2005	PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS
ISO 9969:2016	Thermoplastics pipes Determination of ring stiffness
ISO 1133:2005	Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
EN ISO 1183-1:2012	Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
EN 1446 : 1996	PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RING FLEXIBILITY

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart