![header thumbnail](/images/img-default-logo.png)
EN 13890:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/img-default-logo.png)
Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
24-02-2022
16-09-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Requirements
6 Reagents and materials
7 Apparatus
8 Test methods
9 Test report
Annex A (informative) - Guidance on determination of
analytical recovery
Annex B (informative) - Estimation of uncertainty of
measurement
Annex C (informative) - Interpolation of standard
deviation
Annex D (informative) - Example of estimation of
expanded uncertainty
Bibliography
This European Standard specifies performance requirements and test methods for the evaluation of procedures for measuring metals and metalloids in airborne particles sampled onto a suitable collection substrate, e.g. a filter.This European Standard specifies a method for estimating the uncertainties associated with random and systematic errors and combining them to calculate the expanded uncertainty of the measuring procedure as a whole, as prescribed in EN 482.This European Standard is applicable to measuring procedures in which sampling and analysis is carried out in separate stages, but it does not specify performance requirements for collection, transport and storage of samples, since these are dealt with in EN 13205 and ISO 15767.This European Standard is not applicable to procedures for measuring metals or metalloids present as inorganic gases or vapours, e.g. mercury, arsenic (see EN 838 and EN 1076), or to procedures for measuring metals and metalloids in compounds that could be present as a particle/vapour mixture, e.g. arsenic trioxide.
Committee |
CEN/TC 137
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
BS EN 13890:2009 | Identical |
DIN EN 13890:2010-01 | Identical |
I.S. EN 13890:2009 | Identical |
UNI EN 13890 : 2009 | Identical |
NEN EN 13890 : 2009 | Identical |
NBN EN 13890 : 2009 | Identical |
UNE-EN 13890:2010 | Identical |
PN EN 13890 : 2010 | Identical |
SN EN 13890 : 2010 | Identical |
NS EN 13890 : 2009 | Identical |
NF EN 13890 : 2009 | Identical |
05/30133024 DC : DRAFT APR 2005 | EN 482 - WORKPLACE ATMOSPHERES - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
UNI CEN ISO/TS 15011-6 : 2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 6: PROCEDURE FOR QUANTITATIVE DETERMINATION OF FUME AND GASES FROM RESISTANCE SPOT WELDING |
BS ISO 21438-3:2010 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Hydrofluoric acid and particulate fluorides |
03/303614 DC : DRAFT MAR 2003 | BS ISO 15202-3 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 3: ANALYSIS |
10/30235960 DC : 0 | BS EN 482 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
BS EN 13205-1:2014 | Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations General requirements |
04/19981537 DC : DRAFT MARCH 2004 | EN 14902 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF PB/CD/AS/NI IN AMBIENT AIR |
ISO 21438-3:2010 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides |
ASTM D 4856 : 2011 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
I.S. EN 689:1995 | WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
S.R. CEN/TR 17055:2017 | WORKPLACE EXPOSURE - MEASUREMENT OF CHEMICAL AGENTS COMPLYING WITH THE REQUIREMENTS GIVEN IN EN 482 AND EITHER ONE OF EN 838, EN 1076, EN 13205, EN 13890 AND EN 13936 - CHOICE OF PROCEDURES |
ISO 30011:2010 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
EN 13205-1:2014 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
10/30213522 DC : DRAFT JUNE 2010 | BS ISO 15202-2 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 2: SAMPLE PREPARATION |
11/30228336 DC : 0 | BS EN 13205 - WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
UNE-EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
12/30259160 DC : DRAFT JULY 2012 | BS EN 13936 - WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
I.S. CEN/TR 15230:2005 | WORKPLACE ATMOSPHERES - GUIDANCE FOR SAMPLING OF INHALABLE, THORACIC AND RESPIRABLE AEROSOL FRACTIONS |
UNI EN 13936 : 2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
ISO 15202-2:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation |
BS EN 14530:2004 | Workplace atmospheres. Determination of diesel particulate matter. General requirements |
ISO/TS 15011-6:2012 | Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding |
I.S. EN 482:2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
I.S. EN 14042:2003 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
PD CEN ISO/TS 15011-6:2012 | Health and safety in welding and allied processes. Laboratory method for sampling fume and gases Procedure for quantitative determination of fume from resistance spot welding |
ISO 20581:2016 | Workplace air General requirements for the performance of procedures for the measurement of chemical agents |
10/30219214 DC : 0 | BS ISO 15202-1 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 1: SAMPLING |
BS ISO 20581:2016 | Workplace air. General requirements for the performance of procedures for the measurement of chemical agents |
14/30296739 DC : 0 | BS EN 482:2012/A1 - WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
DIN EN 13205-1:2014-09 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
ISO 15202-1:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling |
CEN/TR 15230:2005 | Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
DIN EN 482:2015-12 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents (includes Amendment A1:2015) |
PREN 13205 : DRAFT 2010 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS |
12/30259163 DC : 0 | BS EN 13205-1 - WORKPLACE EXPOSURE - ASSESSMENT OF PERFORMANCE OF INSTRUMENTS FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
09/30165939 DC : 0 | BS ISO 30011 - WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY |
12/30258004 DC : 0 | BS ISO 17091 - WORKPLACE AIR - DETERMINATION OF LITHIUM HYDROXIDE, SODIUM HYDROXIDE, POTASSIUM HYDROXIDE AND CALCIUM DIHYDROXIDE - METHOD BY MEASUREMENT OF CORRESPONDING CATIONS BY SUPPRESSED ION CHROMATOGRAPHY |
I.S. EN 13205-1:2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
PD CEN/TR 15230:2005 | Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
ISO 15202-3:2004 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis |
PD CEN/TR 17055:2017 | Workplace exposure. Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936. Choice of procedures |
BS ISO 15202-3:2004 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Analysis |
NF ISO 15202-2 : 2012 | WORKPLACE AIR - DETERMINATION OF METALS AND METALLOIDS IN AIRBORNE PARTICULATE MATTER BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY - PART 2: SAMPLE PREPARATION |
UNI EN 13205-1 : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 13936:2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
BS ISO 15202-1:2012 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Sampling |
PREN 482 : DRAFT 2010 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
ISO 17091:2013 | Workplace air — Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide — Method by measurement of corresponding cations by suppressed ion chromatography |
ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
DIN EN 14530 E : 2004 | WORKPLACE ATMOSPHERES - DETERMINATION OF DIESEL PARTICULATE MATTER - GENERAL REQUIREMENTS |
BS EN 14042:2003 | Workplace atmospheres. Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
BS EN 482 : 2012 | WORKPLACE EXPOSURE - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
UNE-EN 482:2012 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
EN 14530:2004 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
EN 14042:2003 | Workplace atmospheres - Guide for the application and use of procedures for the assessment of exposure to chemical and biological agents |
EN 13936:2014 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
DIN EN 13936 E : 2014 | WORKPLACE EXPOSURE - PROCEDURES FOR MEASURING A CHEMICAL AGENT PRESENT AS A MIXTURE OF AIRBORNE PARTICLES AND VAPOUR - REQUIREMENTS AND TEST METHODS |
BS ISO 30011:2010 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
DIN EN 13936:2014-04 | Workplace exposure - Procedures for measuring a chemical agent present as a mixture of airborne particles and vapour - Requirements and test methods |
BS ISO 17091:2013 | Workplace air. Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide. Method by measurement of corresponding cations by suppressed ion chromatography |
BS ISO 15202-2:2012 | Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Sample preparation |
S.R. CEN ISO/TS 15011-6:2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - LABORATORY METHOD FOR SAMPLING FUME AND GASES - PART 6: PROCEDURE FOR QUANTITATIVE DETERMINATION OF FUME AND GASES FROM RESISTANCE SPOT WELDING (ISO/TS 15011-6:2012) |
BS ISO 17733:2004 | Workplace air. Determination of mercury and inorganic mercury compounds. Method by cold vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
15/30326686 DC : 0 | BS ISO 20581 - WORKPLACE AIR - GENERAL REQUIREMENTS FOR THE PERFORMANCE OF PROCEDURES FOR THE MEASUREMENT OF CHEMICAL AGENTS |
UNE-EN 13205-1:2015 | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements |
DIN EN 13205-1 E : 2014 | WORKPLACE EXPOSURE - ASSESSMENT OF SAMPLER PERFORMANCE FOR MEASUREMENT OF AIRBORNE PARTICLE CONCENTRATIONS - PART 1: GENERAL REQUIREMENTS |
EN 689:2018 | Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values |
ASTM D 4856 : 2011 : R2016 | Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis) |
EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
CEN ISO/TS 15011-6:2012/AC:2012 | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) |
CEN/TR 17055:2017 | Workplace exposure - Measurement of chemical agents complying with the requirements given in EN 482 and either one of EN 838, EN 1076, EN 13205, EN 13890 and EN 13936 - Choice of procedures |
DIN EN 14530:2004-06 | Workplace atmospheres - Determination of diesel particulate matter - General requirements |
DIN EN 14042:2003-07 | WORKPLACE ATMOSPHERES - GUIDE FOR THE APPLICATION AND USE OF PROCEDURES FOR THE ASSESSMENT OF EXPOSURE TO CHEMICAL AND BIOLOGICAL AGENTS |
EN 12919:1999 | Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods |
EN 838:2010 | Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
EN 481:1993 | Workplace atmospheres - Size fraction definitions for measurement of airborne particles |
EN 1076:2009 | Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods |
EN 482:2012+A1:2015 | Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents |
ISO 15202-1:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 1: Sampling |
CEN/TR 15230:2005 | Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosol fractions |
ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
EN 13205:2001 | Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations |
ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
EN 1540:2011 | Workplace exposure - Terminology |
EN 1232:1997 | Workplace atmospheres - Pumps for personal sampling of chemical agents - Requirements and test methods |
ISO 15202-2:2012 | Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 2: Sample preparation |
ISO 15767:2009 | Workplace atmospheres Controlling and characterizing uncertainty in weighing collected aerosols |
ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.