Skip to content
Please enter a keyword to search

  • EN 14080:2013

    Current The latest, up-to-date edition.

    Timber structures - Glued laminated timber and glued solid timber - Requirements

    Available format(s): 

    Language(s): 

    Published date:  26-06-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Symbols
    5 Requirements for glued laminated products
    6 Evaluation of conformity
    7 Marking and labelling
    Annex A (normative) - Release of Formaldehyde
    Annex B (normative) - Additional test methods and
            requirements for adhesives
    Annex C (normative) - Delamination test of glue lines
    Annex D (normative) - Shear test of glue lines
    Annex E (normative) - Tests with laminations with or
            without finger joints (including compliance criteria)
    Annex F (normative) - Bending tests with glued laminated
            timber, glued solid timber and glulam with
            large finger joints (including compliance criteria)
    Annex G (normative) - Measurement of moisture content
    Annex H (normative) - Equipment
    Annex I (normative) - Minimum production requirements
    Annex ZA (informative) - Clauses of this European Standard
             addressing the provisions of the EU
             Construction Products Directive
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard sets the performance requirements of the following glued laminated products:-Glued laminated timber (glulam);-Glued solid timber;-Glulam with large finger joints;-Block glued glulamfor use in buildings and bridges.It also lays down minimum production requirements, provisions for evaluation and attestation of conformity and marking of glued laminated products.This European Standard is applicable for glued laminated timber made of coniferous species listed in this standard or poplar consisting of two or more laminations having a thickness from 6 mm up to 45 mm (inclusive).It may be possible to produce glulam made from specific hardwood species based on some provisions of this European Standard. In this case, Annex ZA does not apply.This European Standard is applicable for glued solid timber made of coniferous species listed in this standard or poplar consisting of two to five laminations having a thickness greater than 45 mm and less than or equal to 85 mm.This European Standard is applicable for large finger joints in glued laminated timber with a finger length of at least 45 mm.This European Standard is applicable for block glued glulam having solid rectangular cross sections.This European Standard also gives the requirements for glued laminated products treated against biological attack. Glued laminated products treated with fire retardants are not covered.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes EN 1194, EN 386, EN 387, EN 390, EN 391, EN 392 & (07/2013) Together with EN 15497, it supersedes EN 385. (05/2014)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 16351:2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
    DIN EN 15497 E : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
    15/30287186 DC : 0 BS ISO 12578 - TIMBER STRUCTURES - GLUED LAMINATED TIMBER - COMPONENT PERFORMANCE AND PRODUCTION REQUIREMENTS
    15/30296765 DC : 0 BS EN 15425 - ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    I.S. EN 301:2017 ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    EN 338:2016 Structural timber - Strength classes
    EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    UNE-EN 301:2014 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
    BS EN 1995-1-1 : 2012 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    BS EN 1380:2009 Timber structures. Test methods. Load bearing nails, screws, dowels and bolts
    I.S. EN 15497:2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
    UNE-EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
    11/30237554 DC : 0 BS EN 14732 - TIMBER STRUCTURES - PREFABRICATED WALL, FLOOR AND ROOF ELEMENTS - REQUIREMENTS
    DIN EN 15228:2009-08 STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK
    DIN EN 15497:2014-07 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
    BS EN 16351:2015 Timber structures. Cross laminated timber. Requirements
    UNI EN 15228 : 2009 STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK
    BS EN 15425:2017 Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements
    UNI EN 15497 : 2014 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
    BS EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
    DIN EN 1380:2009-07 TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS
    DIN EN 1995-1-2 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
    DIN EN 1995-1-1:2010-12 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (includes Corrigendum AC:2006 + Amendment A1:2008)
    BS EN 338:2016 Structural timber. Strength classes
    UNE-EN 338:2016 Structural timber - Strength classes
    I.S. EN 1380:2009 TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS
    I.S. EN 338:2016 STRUCTURAL TIMBER - STRENGTH CLASSES
    I.S. EN 14081-2:2010 TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING
    EN 16351:2015 Timber structures - Cross laminated timber - Requirements
    09/30203195 DC : 0 BS EN 15497 - FINGER JOINTED STRUCTURAL TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
    DIN EN 16351 E : 2015 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
    BS EN 15497:2014 Structural finger jointed solid timber. Performance requirements and minimum production requirements
    06/30149615 DC : 0 EN 1380 - TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS
    BS EN 15228:2009 Structural timber. Structural timber preservative treated against biological attack
    I.S. EN 15425:2017 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    DIN EN 338:2016-07 STRUCTURAL TIMBER - STRENGTH CLASSES
    UNE-EN 14081-2:2010 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing
    EN 14081-2:2010+A1:2012 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing
    UNI EN 1995-1-2 : 2005 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
    UNI EN 1995-1-1 : 2014 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    UNI EN 14081-2 : 2013 TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING
    UNI EN 1380 : 2009 TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS
    DIN EN 16351:2015-12 Timber structures - Cross laminated timber - Requirements
    I.S. EN 1995-1-1:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    I.S. EN 1995-1-2:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN (INCLUDING IRISH NATIONAL ANNEX)
    15/30326222 DC : 0 BS EN 301 - ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    13/30286094 DC : 0 BS EN 338 - STRUCTURAL TIMBER - STRENGTH CLASSES
    ISO 12578:2016 Timber structures — Glued laminated timber — Component performance requirements
    DIN EN 15425 E : 2008 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    UNE-EN 1995-1-2:2016 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design.
    PREN 301 : DRAFT 2015 ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    PREN 15425 : DRAFT 2015 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    PREN 338 : DRAFT 2013 STRUCTURAL TIMBER - STRENGTH CLASSES
    DIN EN 14081-2:2016-06 (Draft) TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING
    BS EN 14081-2 : 2010 TIMBER STRUCTURES - STRENGTH GRADED STRUCTURAL TIMBER WITH RECTANGULAR CROSS SECTION - PART 2: MACHINE GRADING; ADDITIONAL REQUIREMENTS FOR INITIAL TYPE TESTING
    UNE-EN 16351:2016 Timber structures - Cross laminated timber - Requirements
    BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures General - Structural fire design
    UNE-EN 1995-1-1:2016 Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings.
    EN 1995-1-2:2004/AC:2009 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN
    EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
    EN 1380:2009 Timber structures - Test methods - Load bearing nails, screws, dowels and bolts
    EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
    EN 15228:2009 Structural timber - Structural timber preservative treated against biological attack
    DIN EN 15425:2015-06 (Draft) ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS
    DIN EN 15228 E : 2009 STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK
    UNE-EN 15497:2014 Structural finger jointed solid timber - Performance requirements and minimum production requirements
    12/30266868 DC : 0 BS EN 16481 - TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHOD
    I.S. EN 15228:2009 STRUCTURAL TIMBER - STRUCTURAL TIMBER PRESERVATIVE TREATED AGAINST BIOLOGICAL ATTACK
    EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
    DIN EN 1995-1-1 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    DIN EN 1995-1-2:2010-12 Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design (includes Corrigendum AC:2009)
    DIN EN 15425:2008-06 ADHESIVES - ONE COMPONENT POLYURETHANE (PUR) FOR LOAD-BEARING TIMBER STRUCTURES - CLASSIFICATION AND PERFORMANCE REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    93/68/EEC : 1993 AMD 2 1998 COUNCIL DIRECTIVE 93/68/EEC OF 22.7.93 AMENDING DIRECTIVES 87/404/EEC, 88/378/EEC, 89/106/EEC, 89/336/EEC, 89/392/EEC, 89/686/EEC, 90/384/EEC, 90/385/EEC, 90/396/EEC, 91/263/EEC, 92/42/EEC AND 73/23/EEC
    EN 13183-3:2005 Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method
    PD 6693-1:2012 Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings
    EN 13183-1:2002/AC:2003 MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - DETERMINATION BY OVEN DRY METHOD
    EN 302-5:2013 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
    EN 1912:2012/AC:2013 STRUCTURAL TIMBER - STRENGTH CLASSES - ASSIGNMENT OF VISUAL GRADES AND SPECIES
    EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
    EN 302-2:2017 Adhesives for load-bearing timber structures - Test methods - Part 2: Determination of resistance to delamination
    BS EN 386:2001 Glued laminated timber. Performance requirements and minimum production requirements
    89/106/EEC : 1988 COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
    EN 15416-3:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shear
    EN 717-1:2004 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
    BS EN 408 : 2010 TIMBER STRUCTURES - STRUCTURAL TIMBER AND GLUED LAMINATED TIMBER - DETERMINATION OF SOME PHYSICAL AND MECHANICAL PROPERTIES
    EN 14081-4:2009 Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading - Grading machine settings for machine controlled systems
    EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
    EN 301:2017 Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements
    EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
    EN 13556:2003 Round and sawn timber - Nomenclature of timbers used in Europe
    EN 302-1:2013 Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength
    EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
    PREN 15497 : DRAFT 2011 STRUCTURAL FINGER JOINTED SOLID TIMBER - PERFORMANCE REQUIREMENTS AND MINIMUM PRODUCTION REQUIREMENTS
    EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
    EN 350-2:1994 Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe
    EN 14081-1:2016 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements
    BS EN 1912:2012 Structural Timber. Strength classes. Assignment of visual grades and species
    EN 13183-2:2002/AC:2003 MOISTURE CONTENT OF A PIECE OF SAWN TIMBER - ESTIMATION BY ELECTRICAL RESISTANCE METHOD
    ISO 12578:2016 Timber structures — Glued laminated timber — Component performance requirements
    BS EN 338:2016 Structural timber. Strength classes
    EN 386:2001 Glued laminated timber - Performance requirements and minimum production requirements
    EN 302-4:2013 Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength
    EN 302-3:2017 Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength
    EN 408:2010+A1:2012 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
    EN 15425:2017 Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements
    BS 5756(2007) : 2007 VISUAL STRENGTH GRADING OF TEMPERATE HARDWOOD - SPECIFICATION
    EN 338:2016 Structural timber - Strength classes
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    PREN 16351 : DRAFT 2011 TIMBER STRUCTURES - CROSS LAMINATED TIMBER - REQUIREMENTS
    EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
    BS EN 13556:2003 Round and sawn timber. Nomenclature of timbers used in Europe
    ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
    EN 14358:2016 Timber structures - Calculation and verification of characteristic values
    BS EN 301:2013 Adhesives, phenolic and aminoplastic, for load-bearing timber structures. Classification and performance requirements
    BS EN 14081-1:2016 Timber structures. Strength graded structural timber with rectangular cross section General requirements
    BS 4978(2007) : 2007 VISUAL STRENGTH GRADING OF SOFTWOOD - SPECIFICATION
    EN 15228:2009 Structural timber - Structural timber preservative treated against biological attack
    EN 384:2016 Structural timber - Determination of characteristic values of mechanical properties and density
    EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective