EN 14227-10:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement
01-11-2015
24-05-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Constituents
5.1 General
5.2 Binder
5.3 Soil
5.4 Water
5.5 Secondary constituents
6 Mixture
6.1 General
6.2 Proportioning of the constituents, grading and
dry density
7 Requirements of the fresh mixture
7.1 Water content
7.2 Degree of pulverization
7.3 Immediate bearing index
7.4 Moisture condition value
8 Laboratory mechanical performance classification
8.1 General
8.2 California bearing ratio of cement stabilized soil
8.3 Classification of cement bound soil
8.3.1 General
8.3.2 Classification by compressive strength
8.3.3 Classification by R[t], E
9 Resistance to water
9.1 General
9.2 Strength after immersion in water
9.3 Linear swelling after soaking in water
9.4 Volumetric swelling after immersion in water
10 Designation and description
11 Labelling
Annex A (normative) Curing regimes for soil treated by
cement test specimens
Annex B (informative) Production control for hydraulically
treated mixtures
Bibliography
This European Standard specifies soil treated by cement for the pavement layers of roads, airfields and other trafficked areas and specifies the requirements for its constituents, composition and laboratory performance classification. It provides for the use of aggregates with grading curves, which are not constrained by the limits defined in EN 14227-1 for cement bound granular mixtures.This European Standard does not specify requirements for strength prior to trafficking or frost resistance, which might be covered by requirements at the place of use.Production control recommendations are included in the informative Annex B.
| Committee |
CEN/TC 227
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 14227-10:2007 | Identical |
| NF EN 14227-10 : 2006 | Identical |
| NBN EN 14227-10 : 2006 | Identical |
| NEN EN 14227-10 : 2006 | Identical |
| NS EN 14227-10 : 1ED 2006 | Identical |
| I.S. EN 14227-10:2006 | Identical |
| PN EN 14227-10 : 2006 | Identical |
| SN EN 14227-10 : 2006 | Identical |
| SN 640500-10 : 2006 | Identical |
| UNI EN 14227-10 : 2006 | Identical |
| BS EN 14227-10:2006 | Identical |
| DIN EN 14227-10:2006-08 | Identical |
| DIN EN 14227-14:2006-08 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 14: SOIL TREATED BY FLY ASH |
| BS EN 14227-14:2006 | Hydraulically bound mixtures. Specifications Soil treated by fly ash |
| I.S. EN 14227-14:2006 | HYDRAULICALLY BOUND MIXTURES - SPECIFICATIONS - PART 14: SOIL TREATED BY FLY ASH |
| EN 14227-14:2006 | Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash |
| EN 13286-1:2003 | Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 13286-42:2003 | Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures |
| EN 13286-51:2004 | Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction |
| EN 13286-40:2003 | Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures |
| EN 13286-49:2004 | Unbound and hydraulically bound mixtures - Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder |
| EN 13286-43:2003 | Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 197-4:2004 | Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements |
| EN 13286-47:2012 | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
| EN 14227-1:2013 | Hydraulically bound mixtures - Specifications - Part 1: Cement bound granular mixtures |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 13286-46:2003 | Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value |
| EN 13286-52:2004 | Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression |
| EN 14216:2015 | Cement - Composition, specifications and conformity criteria for very low heat special cements |
| EN 13286-41:2003 | Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures |
| EN 13286-50:2004 | Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction |
| EN 13286-5:2003 | Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table |
| EN 13286-4:2003 | Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer |
| EN 13286-53:2004 | Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression |
| EN 13286-3:2003 | Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters |
| EN 13286-48:2005 | Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of degree of pulverisation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.