EN 1455-1:1999

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system

Available format(s):

Withdrawn date: 31-07-2001

Language(s):

Published date: 21-07-1999

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
   3.1 Definitions
   3.2 Symbols
   3.3 Abbreviations
4 Material
   4.1 ABS-compound
   4.2 Reprocessable and recyclable material
   4.3 Sealing ring retaining means
   4.4 Fire behaviour
5 General characteristics
   5.1 Appearance
   5.2 Colour
6 Geometrical characteristics
   6.1 General
   6.2 Dimensions of pipes
   6.3 Dimensions of fittings
   6.4 Dimensions of sockets and pipe ends
   6.5 Types of fittings
7 Mechanical characteristics
   7.1 General characteristics
   7.2 Additional characteristics
8 Physical characteristics
   8.1 Physical characteristics of pipes
   8.2 Physical characteristics of fittings
9 Performance requirements
10 Requirements for application area "BD"
   10.1 General
   10.2 Material characteristics
   10.3 Mechanical characteristics
11 Sealing rings
12 Adhesives
13 Marking
   13.1 General
   13.2 Minimum required marking of pipes
   13.3 Minimum required marking of fittings
14 Installation of piping system
Annex A (informative) General characteristics of ABS pipes
        and fittings

Abstract - (Show below) - (Hide below)

This standard specifies the requirements for pipes, fittings and the system of acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) solid-wall piping systems in the field of soil and waste discharge (low and high temperature) - inside buildings (marked with "B") - for both inside buildings and buried in ground within the building structure (marked with "BD").

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Withdrawn

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
DS EN 1455-1 : 2000	Identical
NS EN 1455-1 : 1ED 1999	Identical
DIN EN 1455-1:1999-12	Identical
ONORM EN 1455-1 : 2015	Identical
NBN EN 1455-1 : 2000	Identical
NEN EN 1455-1 : 2000	Identical
I.S. EN 1455-1:1999	Identical
UNI EN 1455-1 : 2002	Identical
BS EN 1455-1:2000	Identical
NF EN 1455-1 : 2000	Identical
PN EN 1455-1 : 2002	Identical
SN EN 1455-1 : 1999	Identical
UNE-EN 1455-1:2000	Identical
ÖNORM EN 1455-1 : 2018	Identical
SS-EN 1455-1:1999	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DD ENV 13801:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
ISO 7682:2003	Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Acrylonitrile-butadiene-styrene (ABS)
05/30132479 DC : DRAFT MAY 2005	EN 1123-2 - PIPES AND FITTINGS OF LONGITUDINAL WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
PD CEN/TS 1455-2:2012	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Guidance for the assessment of conformity
UNI CEN/TS 1455-2 : 2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
UNE-EN 14680:2016	Adhesives for non-pressure thermoplastics piping systems - Specifications
BS EN 12380:2002	Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
EN 1123-3:2004	Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
EN 1123-2:2006+A1:2007	Pipes and fittings of longitudinally welded hot-dip galvanized steel tube with spigot and socket for waste water systems - Part 2: Dimensions
EN 12666-1:2005+A1:2011	Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
CEN/TS 1455-2:2012	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
CEN/TR 13801:2014	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation
ENV 1455-2:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity
02/121757 DC : DRAFT APR 2002	BS ISO 19220 - PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) INSIDE BUILDINGS - STYRENE COPOLYMER BLENDS (SAN + PVC)
07/30165577 DC : 0	BS EN 1852-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYPROPYLENE (PP) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
DD ENV 1451-2:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polypropylene (PP) Guidance for the assessment of conformity
ISO 19220:2004	Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Styrene copolymer blends (SAN + PVC)
S.R. CEN/TR 13801:2014	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - THERMOPLASTICS - RECOMMENDED PRACTICE FOR INSTALLATION
ISO/TS 7024:2005	Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Thermoplastics — Recommended practice for installation
DIN EN 1366-3:2009-07	Fire resistance tests for service installations - Part 3: Penetration seals
DIN EN 1124-3:2009-02	PIPES AND FITTINGS OF LONGITUDINALLY WELDED STAINLESS STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 3: SYSTEM X - DIMENSIONS
DIN EN 1123-3:2005-02	Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding
I.S. EN 14680:2015	ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
I.S. EN 1123-2:2006	PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
I.S. EN 1366-3:2009	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
DD ENV 1566-2:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Guidance for the assessment of conformity
PD CEN/TR 13801:2014	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Thermoplastics. Recommended practice for installation
DD ENV 1455-2:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Acrylonitrile-butadiene- styrene (ABS) Guidance for the assessment of conformity
DD ENV 1519-2:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Polyethylene (PE) Guidance for the assessment of conformity
S.R. CEN/TS 1455-2:2012	PLASTICS PIPING SYSTEMS FOR SOIL AND WASTE DISCHARGE (LOW AND HIGH TEMPERATURE) WITHIN THE BUILDING STRUCTURE - ACRYLONITRILE-BUTADIENE-STYRENE (ABS) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
PREN 15012 : DRAFT 2014	PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR NON PRESSURE SOIL AND WASTE DISCHARGE WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS
DIN EN 14680 E : 2015	ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
DIN EN 14680:2015-12	ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
DIN EN 1123-2:2007-12	PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
BS EN 1123-2 : 2006	PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL TUBE WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 2: DIMENSIONS
BS EN 1123-3:2004	Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
BS EN 14680:2015	Adhesives for non-pressure thermoplastics piping systems. Specifications
ONORM EN 1366-3 : 2009	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
DD ENV 1565-2:2001	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Styrene copolymer blends (SAN + PVC) Guidance for the assessment of conformity
ISO 8770:2003	Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings Polyethylene (PE)
BS EN 1366-3:2009	Fire resistance tests for service installations Penetration seals
UNE-EN 1366-3:2011	Fire resistance tests for service installations - Part 3: Penetration seals
BS EN 12666-1 : 2005	PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM
BS EN 12056-2:2000	Gravity drainage systems inside buildings Sanitary pipework, layout and calculation
UNI EN 1366-3 : 2009	FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 3: PENETRATION SEALS
EN 14680:2015	Adhesives for non-pressure thermoplastics piping systems - Specifications
EN 1519-1:1999	Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
11/30239900 DC : DRAFT MAR 2011	BS EN 15012 - PLASTICS PIPING SYSTEMS - NON PRESSURE SOIL AND WASTE DISCHARGE PIPING COMPONENTS WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS
14/30297459 DC : 0	BS EN 15012 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR NON PRESSURE SOIL AND WASTE DISCHARGE WITHIN THE BUILDING STRUCTURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS
EN 12380:2002	Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity
EN 1366-3:2009	Fire resistance tests for service installations - Part 3: Penetration seals

Standards Referencing This Book - (Show below) - (Hide below)

EN 1277:2003	Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints
ISO/TR 10358:1993	Plastics pipes and fittings Combined chemical-resistance classification table
ISO 8361-1:1991	Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
EN 681-1:1996/A3:2005	ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
EN 1411:1996	Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method
ISO 265-1:1988	Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
EN 1055:1996	Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
EN 743 : 1994	PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION
EN 763 : 1994	PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING
EN 476:2011	General requirements for components used in drains and sewers
EN 921:1994/AC:1995	PLASTICS PIPING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE
ISO 472:2013	Plastics Vocabulary
ISO 7246:1984	Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) General specification for moulding and extrusion materials
EN 727:1994	Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST)
EN ISO 9969:2016	Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
EN 744:1995	Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method
ISO 7245:1984	Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) General specification for moulding and extrusion materials
EN 1401-1:2009	Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
ISO 4065:1996	Thermoplastics pipes Universal wall thickness table
EN 1053:1995	Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness
ISO 1043-1:2011	Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
ISO 9969:2016	Thermoplastics pipes Determination of ring stiffness
EN 1054:1995	Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart