EN 14774-3:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
Superseded date
01-09-2015
Superseded by
Published date
28-10-2009
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Apparatus
6 Sample preparation
7 Procedure
8 Calculation
9 Precision
10 Test report
Bibliography
This European Standard describes the method of determining the moisture in the analysis sample by drying the sample in an oven. It is intended to be used for general analysis samples according to CEN/TS 14780. The method described in this document is applicable to all solid biofuels. NOTEThe term moisture content when used with biomass materials can be misleading since untreated biomass frequently contains varying amounts of volatile compounds (extractives) which may evaporate when determining the moisture content of the general analysis sample by oven drying (see Bibliography).Since small particle size biofuels are very hygroscopic, their moisture content will vary with change of humidity of the atmosphere and therefore the moisture of the analyses sample should always be determined simultaneously when portions are weighed out for other analytical determinations, for example calorific value, carbon, nitrogen.
| Committee |
CEN/TC 335
|
| DevelopmentNote |
Supersedes CEN/TS 14774-3. (11/2009) Supersedes PREN 14774-3. (11/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 14774-3 : 2009 | Identical |
| NS EN 14774-3 : 2009 | Identical |
| BS EN 14774-3:2009 | Identical |
| NF EN 14774-3 : 2010 | Identical |
| DIN EN 14774-3:2010-02 | Identical |
| I.S. EN 14774-3:2009 | Identical |
| PN EN 14774-3 : 2010 | Identical |
| SN EN 14774-3 : 2010 | Identical |
| NBN EN 14774-3 : 2010 | Identical |
| UNE-EN 14774-3:2010 | Identical |
| UNI EN 14774-3 : 2009 | Identical |
| DIN EN 14961-1:2010-04 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 14961-1:2011 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
| UNE-EN 14918:2011 | Solid biofuels - Determination of calorific value |
| 10/30219396 DC : 0 | BS EN 15297 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| DIN EN 15297:2011-04 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| BS EN 15290:2011 | Solid biofuels. Determination of major elements. Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| NF EN 15104 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| DIN EN 15148:2010-03 | SOLID BIOFUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| BS EN 14961-1:2010 | Solid biofuels. Fuel specifications and classes General requirements |
| I.S. EN 15290:2011 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| I.S. EN ISO 17225-1:2014 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS (ISO 17225-1:2014) |
| NF EN 15297 : 2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| UNE-EN 15290:2011 | Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| CSA ISO 16968 : 2015 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS |
| EN 15414-3:2011 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
| EN 14775:2009 | Solid biofuels - Determination of ash content |
| EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| EN 14961-1:2010 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements |
| EN 15290:2011 | Solid biofuels - Determination of major elements - Al, Ca, Fe, Mg, P, K, Si, Na and Ti |
| DIN EN 15414-3:2011-05 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
| 13/30275858 DC : 0 | BS EN ISO 16967 - SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS |
| BS EN 15105:2011 | Solid biofuels. Determination of the water soluble chloride, sodium and potassium content |
| BS EN ISO 16968:2015 | Solid biofuels. Determination of minor elements |
| 10/30219393 DC : 0 | BS EN 15290 - SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| 10/30219390 DC : 0 | BS EN 15105 - SOLID BIOFUELS - DETERMINATION OF THE WATER-SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| DIN EN ISO 17225-1:2014-09 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014) |
| NF EN 14775 : 2010 | SOLID BIOFUELS - DETERMINATION OF ASH CONTENT |
| NF EN 15148 : 2010 | SOLID BIOFUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| UNE-EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| BS EN 15289:2011 | Solid biofuels. Determination of total content of sulfur and chlorine |
| 10/30219384 DC : 0 | BS EN 15104 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| 13/30276433 DC : 0 | BS ISO 16995 - SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CONTENT OF CHLORIDE, SODIUM AND POTASSIUM |
| BS EN ISO 17225-1:2014 | Solid biofuels. Fuel specifications and classes General requirements |
| DIN EN 15105:2011-04 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| 13/30275861 DC : 0 | BS EN ISO 16968 - SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS |
| BS EN 14918:2009 | Solid biofuels. Determination of calorific value |
| I.S. EN ISO 16968:2015 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS (ISO 16968:2015) |
| 13/30275855 DC : 0 | BS EN ISO 16948 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN |
| DIN EN 15104:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| 13/30277482 DC : 0 | BS EN ISO 16993 - SOLID BIOFUELS - CONVERSION OF ANALYTICAL RESULTS FROM ONE BASIS TO ANOTHER |
| I.S. EN 15414-3:2011 | SOLID RECOVERED FUELS - DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRY METHOD - PART 3: MOISTURE IN GENERAL ANALYSIS SAMPLE |
| UNI EN 14775 : 2010 | SOLID BIOFUELS - DETERMINATION OF ASH CONTENT |
| I.S. EN 15104:2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| I.S. EN 14961-1:2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15290 : 2011 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| NF EN 15290 : 2011 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| UNE-EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| UNI EN 15105 : 2011 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| UNI EN 15289 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| UNI EN 15104 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| DIN EN 14775:2012-11 | SOLID BIOFUELS - DETERMINATION OF ASH CONTENT |
| DIN EN 15148 E : 2010 | SOLID BIOFUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| DIN EN ISO 16968:2015-09 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS (ISO 16968:2015) |
| BS EN 15148:2009 | Solid biofuels. Determination of the content of volatile matter |
| BS EN 14775:2009 | Solid biofuels. Determination of ash content |
| 12/30259558 DC : 0 | BS EN ISO 17225-1 - SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| UNI EN 14918 : 2010 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| NF EN 14918 : 2010 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| 13/30277477 DC : 0 | BS EN ISO 16994 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| CSA ISO 17225-1 : 2015 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 15297:2011 | Solid biofuels. Determination of minor elements. As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| UNE-EN 15297:2011 | Solid biofuels - Determination of minor elements - As, Cd, Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and Zn |
| DIN EN 15289:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| DIN EN 15290:2011-04 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - AL, CA, FE, MG, P, K, SI, NA AND TI |
| EN ISO 17225-1:2014 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014) |
| UNI EN 15414-3 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF MOISTURE CONTENT USING THE OVEN DRY METHOD - PART 3: MOISTURE IN GENERAL ANALYSIS SAMPLE |
| I.S. EN 15148:2009 | SOLID BIOFUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| I.S. EN 14775:2009 | SOLID BIOFUELS - DETERMINATION OF ASH CONTENT |
| I.S. EN 15105:2011 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| UNE-EN 15105:2011 | Solid biofuels - Determination of the water soluble chloride, sodium and potassium content |
| ISO 17225-1:2014 | Solid biofuels Fuel specifications and classes Part 1: General requirements |
| ISO 16968:2015 | Solid biofuels Determination of minor elements |
| EN ISO 16968:2015 | Solid biofuels - Determination of minor elements (ISO 16968:2015) |
| DIN EN 14775 E : 2012 | SOLID BIOFUELS - DETERMINATION OF ASH CONTENT |
| UNI EN ISO 17225-1 : 2014 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 15104:2011 | Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen. Instrumental methods |
| BS EN 15414-3:2011 | Solid recovered fuels. Determination of moisture content using the oven dry method Moisture in general analysis sample |
| I.S. EN 14918:2009 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| 10/30219387 DC : 0 | BS EN 15289 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULPHUR AND CHLORINE |
| NF EN 15105 : 2011 | SOLID BIOFUELS - DETERMINATION OF THE WATER SOLUBLE CHLORIDE, SODIUM AND POTASSIUM CONTENT |
| UNE-EN ISO 16968:2015 | Solid biofuels - Determination of minor elements (ISO 16968:2015) |
| I.S. EN 15297:2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| DIN EN ISO 17225-1 E : 2014 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS (ISO 17225-1:2014) |
| UNI EN 15297 : 2011 | SOLID BIOFUELS - DETERMINATION OF MINOR ELEMENTS - AS, CD, CO, CR, CU, HG, MN, MO, NI, PB, SB, V AND ZN |
| UNI EN 15148 : 2010 | SOLID BIOFUELS - DETERMINATION OF THE CONTENT OF VOLATILE MATTER |
| I.S. EN 15289:2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF SULFUR AND CHLORINE |
| UNE-EN ISO 17225-1:2014 | Solid biofuels - Fuel specifications and classes - Part 1: General requirements (ISO 17225-1:2014) |
| UNE-EN 15414-3:2011 | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
| UNI EN 14961-1 : 2010 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PART 1: GENERAL REQUIREMENTS |
| EN 15148:2009 | Solid biofuels - Determination of the content of volatile matter |
| EN 14918:2009 | Solid biofuels - Determination of calorific value |
| EN 15289:2011 | Solid biofuels - Determination of total content of sulfur and chlorine |
| EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| EN 15105:2011 | Solid biofuels - Determination of the water soluble chloride, sodium and potassium content |
| DIN EN 14918:2014-08 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| ISO 11722:2013 | Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen |
| CEN/TS 14778-1:2005 | Solid biofuels - Sampling - Part 1: Methods for sampling |
| CEN/TS 14588:2003 | Solid biofuels - Terminology, definitions and descriptions |
| CEN/TS 14778-2:2005 | Solid biofuels - Sampling - Part 2: Methods for sampling particulate material transported in lorries |
| CEN/TS 14780:2005 | Solid biofuels - Methods for sample preparation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.