EN 1484:1997
Current
Current
The latest, up-to-date edition.
Water analysis - Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC)
Published date
21-05-1997
Publisher
Sorry this product is not available in your region.
This European Standard gives guidance for the determination of organic carbon indrinking water, ground water, surface water, sea water and waste water. It dealswith definitions, interferences, reagents, and the sample pretreatment of water samples with a content of organic carbon ranging from 0,3 mg/l to 1000 mg/l while the lower value is only applicable in special cases, for example drinking water, measured with instruments capable of measuring these low levels.
| Committee |
CEN/TC 230
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 1484:1998 | Identical |
| DIN EN 1484:1997-08 | Identical |
| NEN EN 1484 : 1997 | Identical |
| SN EN 1484 : 1998 | Identical |
| ÖNORM EN 1484: 2019 04 15 | Identical |
| BS EN 1484:1997 | Identical |
| NF EN 1484 : 1997 | Identical |
| NBN EN 1484 : 1997 | Identical |
| ONORM EN 1484 : 1997 | Identical |
| UNI EN 1484 : 1999 | Identical |
| NS EN 1484 : 1ED 1997 | Identical |
| PN EN 1484 : 1999 | Identical |
| I.S. EN 1484:1998 | Identical |
| DIN EN 1484:2019-04 | Identical |
| 14/30313329 DC : 0 | BS EN 16811-1 - WINTER SERVICE EQUIPMENT - DE-ICING AGENTS - PART 1: SODIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| ISO 9888:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Static test (Zahn-Wellens method) |
| ISO 19227:2018 | Implants for surgery — Cleanliness of orthopedic implants — General requirements |
| I.S. EN 15936:2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| 15/30317321 DC : 0 | BS EN 14944-1 - INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| BS EN ISO 9888:1999 | Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium. Static test (Zahn-Wellens method) |
| EN 12260:2003 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides |
| CEN/TR 16184:2011 | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| CEN/TS 16811-3:2015 | Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods |
| EN ISO 9888:1999 | Water quality - Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium - Static test (Zahn-Wellens method) (ISO 9888:1999) |
| DIN EN 15936:2012-11 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
| DIN EN 16058:2012-07 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| I.S. EN ISO 9888:1999 | WATER QUALITY - EVALUATION OF ULTIMATE AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS IN AQUEOUS MEDIUM - STATIC TEST (ZAHN-WELLENS METHOD) |
| PD CEN/TS 16811-3:2015 | Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods |
| UNE-EN 16421:2015 | Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
| I.S. EN 15664-1:2008 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| BS EN 15664-1 : 2008 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| BS EN 16811-1:2016 | Winter service equipment and products. De-icing agents Sodium chloride. Requirements and test methods |
| UNI EN 15664-1 : 2014 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| I.S. EN 16421:2014 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| 17/30348303 DC : 0 | BS EN 17087 - CONSTRUCTION PRODUCTS - ASSESSMENT OF RELEASE OF DANGEROUS SUBSTANCES - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE FOR TESTING OF RELEASE AND ANALYSIS OF CONTENT |
| UNE-EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| DIN EN 15664-1:2014-03 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| I.S. EN 15002:2015 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
| DIN EN 1485:1996-11 | WATER QUALITY - DETERMINATION OF ADSORBABLE ORGANICALLY BOUND HALOGENS (AOX) |
| VDI 4630:2016-11 | Fermentation of organic materials - Characterization of the substrate, sampling, collection of material data, fermentation tests |
| VDI 2594:2015-09 | Emission control - Pulp production in the sugar industry |
| I.S. EN 12260:2003 | WATER QUALITY - DETERMINATION OF NITROGEN - DETERMINATION OF BOUND NITROGEN (TNB), FOLLOWING OXIDATION TO NITROGEN OXIDES |
| 07/30162208 DC : 0 | BS EN 15664-1 - INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| UNI EN 15936 : 2012 | SLUDGE, TREATED BIOWASTE, SOIL AND WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| BS EN 16421:2014 | Influence of materials on water for human consumption. Enhancement of microbial growth (EMG) |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| PREN 17120 : DRAFT 2017 | PHOTOCATALYSIS - WATER PURIFICATION - PERFORMANCE OF PHOTOCATALYTIC MATERIALS BY MEASUREMENT OF PHENOL DEGRADATION |
| DIN EN 12260:2003-12 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TN), following oxidation to nitrogen oxides |
| UNE-CEN/TR 16184:2011 IN | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| BS EN 15936:2012 | Sludge, treated biowaste, soil and waste. Determination of total organic carbon (TOC) by dry combustion |
| BS 6068-2.83(2003) : 2003 | WATER QUALITY - DETERMINATION OF NITROGEN - DETERMINATION OF BOUND NITROGEN (TN[B]), FOLLOWING OXIDATION TO NITROGEN OXIDES |
| I.S. EN 13370:2003 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, EASILY LIBERATABLE CN[-], F[-] |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| BS 6068-2.62(1998) : 1998 | WATER QUALITY - PHYSICAL, CHEMICAL AND BIOCHEMICAL METHODS - DETERMINATION OF NITROGEN - METHOD USING OXIDATIVE DIGESTION WITH PEROXODISULFATE |
| 14/30313332 DC : 0 | BS EN 16811-2 - WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 2: CALCIUM CHLORIDE AND MAGNESIUM CHLORIDE - REQUIREMENTS AND TEST METHODS |
| 10/30213237 DC : 0 | BS EN 16058 - INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| UNI EN 16058 : 2012 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| I.S. EN 16058:2012 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| ASTM D 5173 : 2015 : REDLINE | Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide |
| NF EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| I.S. CWA 14247:2001 | WATER TREATMENT MEMBRANES - INFLUENCE OF MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHOD |
| S.R. CEN/TR 16184:2011 | CHARACTERIZATION OF WASTE - STATE-OF-THE-ART DOCUMENT - ANALYSIS OF ELUATES |
| UNE-EN 15664-1:2008 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation |
| 13/30291099 DC : 0 | BS EN 15002 - CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
| BS EN 12260:2003 | Water quality. Determination of nitrogen. Determination of bound nitrogen (TN<sub>b</sub>), following oxidation to nitrogen oxides |
| BS EN 13370:2003 | Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN<sup>-</sup>, F<sup>-</sup> |
| BS EN ISO 11905-1:1998 | Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate |
| DIN EN 15002:2015-07 | CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE |
| EN 16421:2014 | Influence of materials on water for human consumption - Enhancement of microbial growth (EMG) |
| EN 16811-1:2016 | Winter service equipment and products - De-icing agents - Part 1: Sodium chloride - Requirements and test methods |
| EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
| EN 15936:2012 | Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion |
| EN 16811-2:2016 | Winter service equipment and products - De-icing agents - Part 2: Calcium chloride and Magnesium chloride - Requirements and test methods |
| EN 15664-1:2008+A1:2013 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation |
| EN 16058:2012 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method |
| PREN 14944-1 : DRAFT 2015 | INFLUENCE OF CEMENTITIOUS PRODUCTS ON WATER INTENDED FOR HUMAN CONSUMPTION - TEST METHODS - PART 1: INFLUENCE OF MIGRATION FROM FACTORY MADE CEMENTITIOUS PRODUCTS ON THE ORGANOLEPTIC PARAMETERS |
| 09/30199768 DC : 0 | BS EN 15936 - SLUDGE, WASTE, TREATED BIOWASTE AND SOIL - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) BY DRY COMBUSTION |
| BS EN 16058:2012 | Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method |
| 16/30312836 DC : 0 | BS ISO 19227 - CLEANING OF ORTHOPEDIC IMPLANTS - GENERAL REQUIREMENTS |
| DD ENV 13370:2001 | Characterization of waste. Analysis of eluates. Determination of Ammonium-N, AOX, conductivity, Hg, phenol index, TOC, CN<sup>-</sup> easily liberatable, F<sup>-</sup> |
| BS EN 16811-2:2016 | Winter service equipment and products. De-icing agents Calcium chloride and Magnesium chloride. Requirements and test methods |
| 04/30116791 DC : DRAFT JUL 2004 | BS EN 15002 - CHARACTERISATION OF WASTE - PREPARATION OF TEST PORTIONS FROM LABORATORY SAMPLE |
| S.R. CEN/TS 16811-3:2015 | WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| DIN EN 16421:2015-05 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| UNI EN 16421 : 2015 | INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| 17/30357809 DC : 0 | BS EN 17120 - PHOTOCATALYSIS - WATER PURIFICATION - PERFORMANCE OF PHOTOCATALYTIC MATERIALS BY MEASUREMENT OF PHENOL DEGRADATION |
| 17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| BS EN 15002:2015 | Characterization of waste. Preparation of test portions from the laboratory sample |
| EN 13370:2003 | Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
| DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 | WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.