|
BS EN 1504-9:2008
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity General principles for use of products and systems |
|
ISO/TS 16774-5:2017
|
Test methods for repair materials for water-leakage cracks in underground concrete structures Part 5: Test method for watertightness |
|
PREN 1504-2 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
|
UNI EN 1504-9 : 2009
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
|
02/102592 DC : DRAFT APR 2002
|
PREN 14406 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE EXPANSION RATIO AND EXPANSION EVOLUTION |
|
BS EN 1504-10:2017
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
|
ISO/TS 16774-4:2016
|
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 4: Test method for adhesion on wet concrete surface |
|
16/30337086 DC : DRAFT APR 2016
|
BS EN 1504-4 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
|
05/30131382 DC : DRAFT MAR 2005
|
BS EN 15184 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION COATED STEEL TO CONCRETE (PULL-OUT TEST) |
|
00/103365 DC : DRAFT APR 2000
|
PREN 1504-4 - PRODUCTS AND SYSTEMS FOR PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
|
DIN EN 1504-2:2015-03 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
|
DIN EN 14879-1 E : 2005
|
ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
|
BS EN 13687-3:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thermal cycling without de-icing salt impact |
|
DIN EN 14879-1:2005-12
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
|
BS EN 15183:2006
|
Products and systems for the protection and repair of concrete structures. Test methods. Corrosion protection test |
|
BS EN 13412:2006
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of modulus of elasticity in compression |
|
BS EN 13687-2:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Thunder-shower cycling (thermal shock) |
|
BS EN 14498:2004
|
Products and systems for the protection and repair of concrete structures. Test methods. Volume and weight changes of injection products after air drying and water storage cycles |
|
BS EN 13062:2003
|
Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement |
|
BS EN 13294:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of stiffening time |
|
DIN EN 14117:2004-12
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products; German version EN 14117:2004 |
|
EN 13395-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
|
EN 13294:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
|
EN 13412:2006
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
|
EN 12617-1:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
EN 13295:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
|
EN 13057:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
|
EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
|
EN 12618-1:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 1: Adhesion and elongation capacity of injection products with limited ductility |
|
DIN EN 14497:2004-12
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the filtration stability; German version EN 14497:2004 |
|
EN 12189:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time |
|
EN 13395-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete |
|
EN 13396:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress |
|
DD ENV 1504-9:1997
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control andevaluation of conformity General principles for the use of products and systems |
|
01/107932 DC : DRAFT NOV 2001
|
BS EN 1504-5 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
01/102985 DC : DRAFT MAR 2001
|
PREN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
|
ISO/TS 16774-3:2016
|
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 3: Test method for water (wash out) resistance |
|
DIN EN 13412:2006-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
|
DIN EN 15184 E : 2006
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - SHEAR ADHESION OF COATED STEEL TO CONCRETE (PULL-OUT TEST) |
|
DIN EN 15183 E : 2006
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
|
DIN EN 1504-4:2005-02
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding; German version EN 1504-4:2004 |
|
BS EN 1504-8:2016
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and AVCP Quality control and Assessment and verification of the constancy of performance (AVCP) |
|
BS EN 12618-3:2004
|
Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method |
|
DIN EN 13687-2:2002-05
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock); German version EN 13687-2:2002 |
|
DIN EN 13687-1:2002-05
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THERMAL COMPATIBILITY - PART 1: FREEZE-THAW CYCLING WITH DE-ICING SALT IMMERSION |
|
DIN EN 13294:2002-09
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF STIFFENING TIME |
|
I.S. EN 13412:2006
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY IN COMPRESSION |
|
I.S. EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
DIN EN 13584:2003-11
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF CREEP IN COMPRESSION FOR REPAIR PRODUCTS |
|
DIN EN 1504-6:2006-11
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
|
DIN EN 13687-3:2002-05
|
Products and systems for the protection and repair of concrete structures - Test methods; Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact; German version EN 13687-3:2002 |
|
DIN EN 13395-3:2002-09
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 3: TEST FOR FLOW OF REPAIR CONCRETE |
|
DIN EN 1504-3:2006-03
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
|
I.S. EN 1504-8:2016
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
|
DIN EN 13687-4:2002-05
|
Products and systems for the protection and repair of concrete structures - Test method; Determination of thermal compatibility - Part 4: Dry thermal cycling; German Version EN 13687-4:2002 |
|
DIN EN 13062:2003-09
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THIXOTROPY OF PRODUCTS FOR PROTECTION OF REINFORCEMENT |
|
I.S. EN 13395-1:2002
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF WORKABILITY - PART 1: TEST FOR FLOW OF THIXOTROPIC MORTARS |
|
PREN 1504-10 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
|
15/30327977 DC : 0
|
BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
|
PREN 1504-4 : DRAFT 2016
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
|
05/30131376 DC : DRAFT MAR 2005
|
BS EN 15183 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - CORROSION PROTECTION TEST |
|
DIN EN 14497 E : 2004
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE FILTRATION STABILITY |
|
DIN EN 14406 E : 2004
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE EXPANSION RATIO AND EXPANSION EVOLUTION |
|
DIN EN 12617-1:2003-11
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LINEAR SHRINKAGE FOR POLYMERS AND SURFACE PROTECTION SYSTEMS (SPS) |
|
BS EN 12188:1999
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion steel-to-steel for characterization of structural bonding agents |
|
BS EN 12617-1:2003
|
Products and systems for the protection and repair of concrete structures. Test methods Determination of linear shrinkage for polymers and surface protection systems (SPS) |
|
BS EN 13395-3:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of repair concrete |
|
BS EN 13395-4:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Application of repair mortar overhead |
|
BS EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
|
BS EN 13396:2004
|
Products and systems for the protection and repair of concrete structures. Test methods. Measurement of chloride ion ingress |
|
BS EN 1504-3:2005
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair |
|
EEMUA 207 : 2009
|
DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION |
|
DIN EN 1504-2:2005-01
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
|
DIN EN 1504-7:2006-11
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
|
EN 1504-5:2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
EN 1799:1998
|
Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface |
|
EN 13584:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
|
UNI EN 1504-7 : 2007
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
UNI EN 1504-10 : 2005
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
|
UNI EN 1504-5 : 2013
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
UNI EN 1504-6 : 2007
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 6: ANCHORING OF REINFORCING STEEL BAR |
|
96/108350 DC : DRAFT NOV 1996
|
PREN 12618-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE ADHESION OF INJECTION PRODUCTS, WITH OR WITHOUT THERMAL CYCLING - PART 3: SLANT SHEAR METHOD |
|
DIN EN 1504-9:2008-11
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPALS FOR THE USE OF PRODUCTS AND SYSTEMS |
|
04/30109196 DC : DRAFT FEB 2004
|
EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE |
|
96/108349 DC : DRAFT NOV 1996
|
PREN 12618-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE ADHESION OF INJECTION PRODUCTS, WITH OR WITHOUT THERMAL CYCLING - PART 2: TENSILE BOND METHOD |
|
I.S. EN 1504-9:2008
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 9: GENERAL PRINCIPLES FOR THE USE OF PRODUCTS AND SYSTEMS |
|
15/30316975 DC : 0
|
BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
|
EN 1504-10:2017
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
|
DIN EN 14498 E : 2004
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - VOLUME AND WEIGHT CHANGES OF INJECTION PRODUCTS AFTER AIR DRYING AND WATER STORAGE CYCLES |
|
DIN EN 1504-3:2015-08 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR |
|
BS EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
|
BS EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures. Test methods Determination of shrinkage and expansion |
|
BS EN 12618-2:2004
|
Products and systems for the protection and repair of concrete structures. Test methods Determination of the adhesion of injection products, with or without thermal cycling. Adhesion by tensile bond strength |
|
BS EN 14068:2003
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of watertightness of injected cracks without movement in concrete |
|
BS EN 12192-1:2002
|
Products and systems for the protection and repair of concrete structures. Granulometry analysis Test method for dry components of premixed mortar |
|
UNE-EN 1504-2:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
BS EN 14879-1:2005
|
0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate |
|
BS EN 13687-4:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Dry thermal cycling |
|
BS EN 13395-1:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of thixotropic mortars |
|
BS EN 1504-4:2004
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural bonding |
|
BS EN 13395-2:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of workability Test for flow of grout or mortar |
|
BS EN 13584:2003
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of creep in compression for repair products |
|
BS EN 13295:2004
|
Products and systems for the protection and repair of concrete structures.Test methods. Determination of resistance to carbonation |
|
BS EN 13057:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance of capillary absorption |
|
BS EN 15184:2006
|
Products and systems for the protection and repair of concrete structures. Test methods. Shear adhesion of coated steel to concrete (pull-out test) |
|
BS EN 12189:1999
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of open time |
|
BS EN 1504-6:2006
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Anchoring of reinforcing steel bar |
|
BS EN 1504-5:2013
|
Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection |
|
BS EN 12617-3:2002
|
Products and systems for the protection and repair of concrete structures. Test methods Determination of early age linear shrinkage for structural bonding agents |
|
BS EN 14117:2004
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of time of efflux of cementitious injection products |
|
DIN EN 14406:2004-12
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution; German version EN 14406:2004 |
|
EN 1504-3:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair |
|
EN 1504-8:2016
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
|
EN 15184:2006
|
Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
|
EN 1504-4:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding |
|
EN 13687-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
|
EN 14497:2004/AC:2006
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THE FILTRATION STABILITY |
|
EN 13687-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
|
EN 13687-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
|
EN 1504-9:2008
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
|
EN 13687-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling |
|
EN 15183:2006
|
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |
|
EN 1504-7:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
|
EN 14406:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution |
|
EN 1504-6:2006
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
|
EN 14117:2004
|
Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products |
|
EN 14498:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles |
|
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
|
EN 14068:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete |
|
EN 14879-1:2005
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
|
ISO/TS 16774-1:2017
|
Test methods for repair materials for water-leakage cracks in underground concrete structures Part 1: Test method for thermal stability |
|
ISO/TS 16774-6:2017
|
Test methods for repair materials for water-leakage cracks in underground concrete structures Part 6: Test method for response to the substrate movement |
|
ISO/TS 16774-2:2016
|
Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance |
|
04/19991587 DC : DRAFT MAY 2004
|
BS EN 1504-6 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 6: ANCHORING OF REINFORCING STEEL BAR |
|
UNE-EN 1504-9:2011
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
|
PREN 1504-7 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
00/103366 DC : DRAFT APR 2000
|
PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS |
|
S.R. CWA 15899:2008
|
STANDARDIZATION OF AN INNOVATION CAPABILITY RATING FOR SMES |
|
15/30327125 DC : 0
|
BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
15/30324901 DC : 0
|
BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
|
PREN 1504-3 : DRAFT 2015
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS |
|
ISO/TR 16475:2011
|
Guidelines for the repair of water-leakage cracks in concrete structures |
|
I.S. EN 1504-10:2017
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
|
DIN EN 1504-8:2016-08
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 8: QUALITY CONTROL AND ASSESSMENT AND VERIFICATION OF THE CONSTANCY OF PERFORMANCE (AVCP) |
|
DIN EN 1504-7:2015-09 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
|
DIN EN 1504-4:2016-05 (Draft)
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 4: STRUCTURAL BONDING |
|
DIN EN 13295:2004-08
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
|
DIN EN 1504-5:2013-06
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION |
|
BS EN 14497:2004
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the filtration stability |
|
BS EN 12637-3:2003
|
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Effect of injection products on elastomers |
|
BS EN 1799:1999
|
Products and systems for the protection and repair of concrete structures. Test methods. Tests to measure the suitability of structural bonding agents for application to concrete surface |
|
BS EN 14406:2004
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of the expansion ratio and expansion evolution |
|
BS EN 13687-1:2002
|
Products and systems for the protection and repair of concrete structures. Test methods. Determination of thermal compatibility Freeze-thaw cycling with de-icing salt immersion |
|
BS EN 12618-1:2003
|
Products and systems for the protection and repair of concrete structures. Test methods Adhesion and elongation capacity of injection products with limited ductility |
|
EN 12637-3:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
|
EN 12192-1:2002
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
|
EN 12618-3:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
|
EN 13395-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
|
DIN EN 12637-3:2004-03
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003 |
|
EN 12618-2:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with our without thermal cycling - Adhesion by tensile bond strength |
|
DIN EN 12618-1:2003-11
|
PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - PART 1: ADHESION AND ELONGATION CAPACITY OF INJECTION PRODUCTS WITH LIMITED DUCTILITY |
|
EN 13395-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
|
EN 12617-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents |
|
EN 13062:2003
|
Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement |
|
DIN EN 15184:2006-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test) |
|
DIN EN 14498:2004-12
|
Products and systems for the protection and repair of concrete structures - Test methods - Volume and weight changes of injection products after air drying and water storage cycles; German version EN 14498:2004 |
|
DIN EN 12618-3:2004-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
|
DIN EN 14068:2004-03
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of water tightness of injected cracks without movement in concrete |
|
DIN EN 12618-2:2004-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength |
|
DIN EN 15183:2006-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test |