Skip to content
Please enter a keyword to search

  • EN 15376:2014

    Current The latest, up-to-date edition.

    Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

    Available format(s): 

    Language(s): 

    Published date:  15-10-2014

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Sampling
    4 Requirements and test methods
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228 [5]. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V).NOTEFor the purposes of this document, the term “% (m/m)” and “% (V/V)” are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 19
    Development Note Supersedes PREN 15376. (10/2014)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN 15721:2014 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
    I.S. CEN TR 15367-3:2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
    12/30258729 DC : 0 BS EN 15721 - ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    DD CEN/TS 15293:2011 Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods
    I.S. EN 228:2017 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
    DIN EN 228:2004-03 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
    CEN/TR 15993:2018 Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
    EN 13352:2012 Specification for the performance of automatic tank contents gauges
    DIN EN 15721:2013-12 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    DIN EN 15492:2012-04 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
    PREN 15721 : DRAFT 2012 ETHANOL AS BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    PREN 15492 : DRAFT 2010 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    DIN EN 15492 E : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    UNE-EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
    UNI EN 15492 : 2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULPHATE CONTENT - ION CHROMATOGRAPHIC METHOD
    DIN EN 13352:2012-06 Specification for the performance of automatic tank contents gauges
    I.S. EN 13352:2012 SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES
    I.S. EN 14125:2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    DIN EN 15721 E : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    10/30227686 DC : 0 BS EN 13352 - SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES
    PD CEN/TR 15367-3:2009 Petroleum products. Guide for good housekeeping Prevention of cross contamination
    07/30169525 DC : 0 BS EN 15721 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND VOLATILE IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    09/30199323 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL REQUIREMENTS AND TEST METHODS
    UNI EN 15721 : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    13/30286135 DC : 0 BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    BS 2000-563(2011) : 2011 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    BS 2000-571(2013) : 2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    10/30216579 DC : 0 BS EN 15492 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    BS EN 15492:2012 Ethanol as a blending component for petrol. Determination of inorganic chloride and sulfate content. Ion chromatographic method
    UNI CEN/TR 15367-3 : 2009 PETROLEUM PRODUCTS - GUIDE FOR GOOD HOUSEKEEPING - PART 3: PREVENTION OF CROSS CONTAMINATION
    S.R. CEN/TR 16514:2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
    I.S. EN 15492:2012 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF INORGANIC CHLORIDE AND SULFATE CONTENT - ION CHROMATOGRAPHIC METHOD
    DIN EN 228:2017-08 AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS
    UNI EN 14125 : 2013 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    PD CEN/TR 15993:2013 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination
    S.R. CEN/TR 15993:2018 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - BACKGROUND TO THE PARAMETERS REQUIRED AND THEIR RESPECTIVE LIMITS AND DETERMINATION
    S.R. CEN TS 15293:2011 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
    16/30336428 DC : 0 BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
    PREN 15293 : DRAFT 2016 AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS
    UNE-EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
    BS EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
    UNE-EN 13352:2012 Specification for the performance of automatic tank contents gauges
    EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
    EN 14125:2013 Thermoplastic and flexible metal pipework for underground installation at petrol filling stations
    EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
    EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
    PD CEN/TR 16514:2013 Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol
    BS EN 15721:2013 Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and other impurities. Gas chromatographic method
    I.S. EN 15721:2013 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF HIGHER ALCOHOLS, METHANOL AND OTHER IMPURITIES - GAS CHROMATOGRAPHIC METHOD
    CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
    DIN EN 14125:2013-09 THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS
    BS EN 13352:2012 Specification for the performance of automatic tank contents gauges
    CEN/TS 15293:2011 Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods
    CEN/TR 16514 : 2013 AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL
    UNE-EN 228:2013 Automotive fuels - Unleaded petrol - Requirements and test methods

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 15721:2013 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method
    EN 15489:2007 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
    EN 15769:2009 Ethanol as a blending component of petrol - Determination of appearance - Visual method
    EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
    EN 15691:2009 Ethanol as a blending component for petrol - Determination of dry residue (involatile material) - Gravimetric method
    EN 228:2012+A1:2017 Automotive fuels - Unleaded petrol - Requirements and test methods
    ISO 3170:2004 Petroleum liquids — Manual sampling
    EN 15485:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Wavelength dispersive X-ray fluorescence spectrometric method
    EN 15491:2007 Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
    EN 15487:2007 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
    EN 15837:2009 Ethanol as a blending component for petrol - Determination of phosphorus, copper and sulfur content - Direct method by inductively coupled plasma optical emission spectrometry (ICP OES)
    ISO 4259:2006 Petroleum products Determination and application of precision data in relation to methods of test
    EN 15938:2010 Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity
    EN 15488:2007 Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
    EN 15492:2012 Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
    EN 15486:2007 Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
    EN ISO 3170:2004 Petroleum liquids - Manual sampling (ISO 3170:2004)
    EN ISO 4259:2006 Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective