EN 1559-5:2017
Current
The latest, up-to-date edition.
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
01-03-2017
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Designations
6 Manufacture
7 Requirements
8 Inspection
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (informative) - Significant technical changes
between this European standard and the previous
edition
This part of EN 1559 specifies the additional technical delivery conditions for castings, see EN 1753 and cast anodes, see EN 12438 made from magnesium alloys.This part of EN 1559 applies to magnesium alloy castings produced in sand or permanent moulds or by pressure die casting, centrifugal casting, continuous casting or investment casting.This part of EN 1559 does not apply to ingots, bars, billets (or other shapes) for further reprocessing, such as re-melting or extrusion.
| Committee |
CEN/TC 190
|
| DevelopmentNote |
Supersedes PREN 1559-5. (03/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 1559-5:2017 | Identical |
| DIN EN 1559-5:2017-05 | Identical |
| NS EN 1559-5 : 2017 | Identical |
| NF EN 1559-5 : 2017 | Identical |
| DIN EN 1559-5:2015-12 (Draft) | Identical |
| PN EN 1559-5 : 2017 | Identical |
| UNI EN 1559-5 : 2003 | Identical |
| BS EN 1559-5:2017 | Identical |
| UNE-EN 1559-5:2017 | Identical |
| NEN EN 1559-5 : 2017 | Identical |
| NBN EN 1559-5 : 1998 | Identical |
| I.S. EN 1559-5:2017 | Identical |
| SN EN 1559-5 : 2017 | Identical |
| NBN EN 1559-1 : 2011 | Identical |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN 1753:1998 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| EN 12438:2017 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| BS ISO 16220:2017 | Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
| DIN EN 12438:2015-12 (Draft) | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| I.S. EN 12438:2017 | MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| ISO 26202:2007 | Magnesium and magnesium alloys Magnesium alloys for cast anodes |
| ISO 16220:2017 | Magnesium and magnesium alloys — Magnesium alloy ingots and castings |
| BS EN 1753:1997 | Magnesium and magnesium alloys. Magnesium alloy ingots and castings |
| BS EN 12438:2017 | Magnesium and magnesium alloys. Magnesium alloys for cast anodes |
| UNE-EN 12438:2018 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| 16/30340174 DC : 0 | BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| 04/100677 DC : DRAFT JAN 2004 | ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| EN 12438:2017 | Magnesium and magnesium alloys - Magnesium alloys for cast anodes |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| EN ISO 5579:2013 | Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) |
| EN 1370:2011 | Founding - Examination of surface condition |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.