EN 15614:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland clothing
17-03-2022
13-06-2007
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Clothing design
4.1 General
4.2 Collar
4.3 Coverall or suit
4.4 Pockets
4.5 Hardware
4.6 Sleeves
4.7 Trousers
5 Sampling and pre-treatment
5.1 Sampling
5.2 Number and size of specimen
5.3 Pre-treatment
5.3.1 General
5.3.2 Cleaning
5.3.3 Ageing
5.4 Conditioning
5.5 Exposure surface
6 Thermal requirements
6.1 General
6.2 Flame spread
6.2.1 General
6.2.2 Testing in accordance with EN ISO 15025:2002,
Procedure A (Code letter A1)
6.2.3 Testing in accordance with EN ISO 15025:2002,
Procedure B (Code letter A2)
6.3 Heat transfer (radiation)
6.4 Heat resistance
6.5 Heat resistance of the sewing thread
7 Mechanical requirements
7.1 Tensile strength
7.2 Tear strength
7.3 Main seam strength
8 Ergonomic and comfort requirements
8.1 Thermal resistance
8.2 Water vapour resistance
9 General requirements
9.1 Dimensional change after washing and/or dry cleaning
9.2 Retroreflective and/or fluorescent
performance
10 Marking
11 Information supplied by the manufacturer
Annex A (informative) Uncertainty of measurement
Annex ZA (informative) Relationship between this European
Standard and the Essential
Requirements of EU Directive 89/686/EEC
Bibliography
This European Standard specifies methods of test and minimum performance requirements for protective clothing, designed to protect the wearer's body, except the head, hands and feet, to be worn in wildland firefighting and associated activities. This clothing is not intended to provide protection during fire entrapment. This European Standard covers the general design of the garment, the minimum level of performance for the materials employed and the methods of test to determine these levels.This European Standard is not applicable to clothing for use in risk situations encountered in structural firefighting (EN 469 and ISO 11613) or where a high level of infrared radiation is expected (EN 1486), nor does this European Standard cover clothing to protect against chemical, biological, electrical or radiation hazards.
Committee |
CEN/TC 162
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
ONORM EN 15614 : 2007 | Identical |
NEN EN 15614 : 2007 | Identical |
BS EN 15614:2007 | Identical |
NBN EN 15614 : 2007 | Identical |
UNI EN 15614 : 2007 | Identical |
PN EN 15614 : 2009 | Identical |
NF EN 15614 : 2007 | Identical |
SN EN 15614 : 2007 | Identical |
UNE-EN 15614:2007 | Identical |
NS EN 15614 : 1ED 2007 | Identical |
DIN EN 15614:2007-09 | Identical |
I.S. EN 15614:2007 | Identical |
BS EN 1486:2007 | Protective clothing for fire-fighters. Test methods and requirements for reflective clothing for specialized fire-fighting |
DIN EN 469:2015-08 (Draft) | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
I.S. EN 1486:2007 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
16/30318707 DC : 0 | BS EN ISO 18640-2 - PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - PHYSIOLOGICAL IMPACT - PART 2: DETERMINATION OF PHYSIOLOGICAL HEAT LOAD CAUSED BY PROTECTIVE CLOTHING WORN BY FIREFIGHTERS |
PREN 469 : DRAFT 2015 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
DIN EN 1486:2008-04 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
I.S. EN 469:2014 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
UNI EN 469 : 2014 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
UNI EN 1486 : 2008 | PROTECTIVE CLOTHING FOR FIRE-FIGHTERS - TEST METHODS AND REQUIREMENTS FOR REFLECTIVE CLOTHING FOR SPECIALISED FIRE-FIGHTING |
EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
12/30265282 DC : 0 | BS EN 16471 - FIREFIGHTERS HELMETS - HELMETS FOR WILDLAND FIRE FIGHTING |
DIN EN 469:2007-02 | PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR FIREFIGHTING |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
EN ISO 13937-2:2000 | Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
EN 25077 : 1993 | TEXTILES - DETERMINATION OF DIMENSIONAL CHANGE IN WASHING AND DRYING |
ISO 15538:2001 | Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
ISO 3146:2000 | Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
EN 471:2003+A1:2007 | High-visibility warning clothing for professional use - Test methods and requirements |
ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
EN 340:2003 | Protective clothing - General requirements |
ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
EN 1486:2007 | Protective clothing for fire-fighters - Test methods and requirements for reflective clothing for specialised fire-fighting |
EN ISO 6330:2012 | Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) |
EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
ISO 11613:1999 | Protective clothing for firefighters Laboratory test methods and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.