EN 15618:2009+A1:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Rubber- or plastic-coated fabrics - Upholstery fabrics - Classification and methods of test
30-11-2012
16-05-2012
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test report
Bibliography
This European Standard specifies a set of properties relevant to the assessment of upholstery coated fabrics for indoor furniture and the appropriate test methods to determine these properties. It also describes a matrix system to express the material properties of an upholstery fabric.This European Standard applies to upholstery fabrics both in domestic and public use, except when used for the seats of road or railway vehicles, boats or aeroplanes.This European Standard applies to upholstery fabrics with a coating on the wear face. This European Standard does not apply to textile upholstery fabrics covered by EN 14465.
| Committee |
CEN/TC 248
|
| DevelopmentNote |
2009 Edition Re-Issued in May 2012 & incorporates AMD 1 2012. (06/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DS EN 15618 : 2009 + A1 2012 | Identical |
| ONORM EN 15618 : 2012 | Identical |
| NBN EN 15618 : 2009 + A1 2012 | Identical |
| NF EN 15618 : 2009 + A1 2012 | Identical |
| UNI EN 15618 : 2012 | Identical |
| I.S. EN 15618:2009 | Identical |
| UNE-EN 15618:2009 | Identical |
| NS EN 15618 : 2009 + A1 2012 | Identical |
| BS EN 15618 : 2009 | Identical |
| NEN EN 15618 : 2009 + A1 2012 | Identical |
| DIN EN 15618:2012-08 | Identical |
| PN EN 15618 : 2009 + A1 2012 | Identical |
| SN EN 15618+A1:2012 | Identical |
| UNE-EN 15618:2009+A1:2012 | Identical |
| BS EN 15618:2009+A1:2012 | Identical |
| ISO 2286-1:2016 | Rubber- or plastics-coated fabrics Determination of roll characteristics Part 1: Methods for determination of length, width and net mass |
| EN ISO 2231:1995 | Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| ISO 5981:2007 | Rubber- or plastics-coated fabrics Determination of resistance to combined shear flexing and rubbing |
| EN 13360:2002 | Rubber- or plastics-coated fabrics - Terminology |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| EN 1021-1:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
| EN ISO 26082:2007 | Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather (ISO 26082:2007) |
| EN 12720:2009+A1:2013 | Furniture - Assessment of surface resistance to cold liquids |
| ISO 3303:1990 | Rubber- or plastics-coated fabrics — Determination of bursting strength |
| EN ISO 5402:2002 | Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method (ISO 5402:2002) |
| ISO 5402:2002 | Leather Physical and mechanical tests Determination of flex resistance by flexometer method |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| ISO 5470-2:2003 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 2: Martindale abrader |
| EN ISO 2411:2017 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| ISO 2231:1989 | Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |
| ISO 7617-2:2003 | Plastics-coated fabrics for upholstery — Part 2: Specification for PVC-coated woven fabrics |
| ISO 105-X12:2016 | Textiles Tests for colour fastness Part X12: Colour fastness to rubbing |
| ISO 26082:2007 | Leather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather |
| EN ISO 2286-1:2016 | Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass (ISO 2286-1:2016) |
| EN ISO 5981:2007 | Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007) |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| EN ISO 5470-2:2003 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003) |
| EN ISO 105-X12:2016 | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| EN ISO 105-B02:2014 | Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) |
| ISO 7617-1:2001 | Plastics-coated fabrics for upholstery — Part 1: Specification for PVC-coated knitted fabrics |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| EN 1021-2:2014 | Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent |
| ISO 105-B02:2014 | Textiles Tests for colour fastness Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.