EN 15619:2014
Current
The latest, up-to-date edition.
Rubber or plastic coated fabrics - Safety of temporary structures (tents) - Specification for coated fabrics intended for tents and related structures
26-03-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General description of coated fabrics intended for tents
5 Characteristics relating to coated fabrics
6 Requirements
7 Information provided by the coated fabric producer
Annex A (normative) - Artificial ageing by long term
exposure to the combination of UV irradiation,
elevated temperature and water
Annex B (normative) - Coating adhesion
Annex C (informative) - Weld resistance recommendation
Annex D (informative) - Assessment of conformity
Bibliography
This European Standard specifies the characteristics, requirements and test methods for coated fabric intended for mobile, temporary installed tents (see 3.3) and related structures.Plastic film and material other than coated fabrics are not covered by this European Standard.
| Committee |
CEN/TC 248
|
| DevelopmentNote |
Supersedes PREN 15619. (04/2014)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 15619 E : 2014 | Identical |
| UNI EN 15619 : 2014 | Identical |
| DIN EN 15619:2014-07 | Identical |
| NS EN 15619 : 2014 | Identical |
| BS EN 15619:2014 | Identical |
| NEN EN 15619 : 2014 | Identical |
| PN EN 15619 : 2014 | Identical |
| SN EN 15619 : 2014 | Identical |
| UNE-EN 15619:2009 | Identical |
| NF EN 15619 : 2014 | Identical |
| NBN EN 15619 : 2014 | Identical |
| I.S. EN 15619:2014 | Identical |
| UNE-EN 15619:2014 | Identical |
| I.S. EN 13782:2015 | TEMPORARY STRUCTURES - TENTS - SAFETY |
| DIN EN 13782:2015-06 | TEMPORARY STRUCTURE - TENTS - SAFETY |
| BS EN ISO 5912:2011 | Camping tents |
| ISO 5912:2011 | Camping tents |
| BS EN 13782:2015 | Temporary structure. Tents. Safety |
| EN ISO 5912:2011 | Camping tents (ISO 5912:2011) |
| UNE-EN 13782:2016 | Temporary structure - Tents - Safety |
| UNE-EN ISO 5912:2012 | Camping tents (ISO 5912:2011) |
| UNI EN ISO 5912 : 2011 | CAMPING TENTS |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| I.S. EN ISO 5912:2011 | CAMPING TENTS (ISO 5912:2011) |
| DIN EN ISO 5912:2013-08 | CAMPING TENTS (ISO 5912:2011) |
| EN ISO 2286-2:2016 | Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016) |
| EN ISO 2231:1995 | Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing (ISO 2231:1989) |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| ISO 2411:2017 | Rubber- or plastics-coated fabrics — Determination of coating adhesion |
| EN 12280-1:1997 | Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 15977:2011 | Rubber or plastic coated fabrics - Mechanical properties - Determination of the elongation under load and the residual deformation |
| ISO 846:1997 | Plastics Evaluation of the action of microorganisms |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 2286-2:2016 | Rubber- or plastics-coated fabrics Determination of roll characteristics Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate |
| UNI 10949 : 2001 | SAFETY OF EQUIPMENT FOR FAIRGROUNDS AND AMUSEMENT PARKS - TENTS, TEMPORARY AND/OR ITINERANT FABRIC STRUCTURE - DESIGN, CONSTRUCTION, INSTALLATION AND MAINTENANCE |
| EN ISO 2411:2017 | Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 2231:1989 | Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing |
| EN 14115:2001 | Textiles - Burning behaviour of materials for marquees, large tents and related products - Ease of ignition |
| EN ISO 846:1997 | Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
| DIN 18204-1:2007-05 | COMPONENTS FOR ENCLOSURES MADE OF TEXTILE FABRICS AND PLASTIC FILMS (AWNINGS) FOR STRUCTURES AND TENTS - PART 1: PVC COATED POLYESTER BASE FABRIC |
| EN 1875-3:1997 | Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| ISO 1420:2016 | Rubber- or plastics-coated fabrics Determination of resistance to penetration by water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.