EN 15681-1:2016
Current
The latest, up-to-date edition.
Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general physical and mechanical properties
27-01-2016
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Chemical composition
5 Physical and mechanical characteristics
6 Dimensional requirements
7 Quality requirements
8 Designation
Annex A (informative) - Complementary information
related to REACH
Bibliography
This Part of this European Standard specifies and classifies basic alumino silicate glass products, indicates their chemical composition, their main physical and mechanical characteristics, their dimensional and their minimum quality requirements (in respect of optical and visual faults).This European Standard applies to basic alumino silicate glasses supplied in stock sizes, supplied sizes or in cut sizes for final end use.This European Standard does not apply to final cut sizes having a dimension less than 100 mm or a surface area less than 0,05 m2.
| Committee |
CEN/TC 129
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN 15681-1:2016 | Identical |
| NBN EN 15681-1 : 2016 | Identical |
| PN EN 15681-1 : 2016 | Identical |
| UNI EN 15681-1 : 2016 | Identical |
| BS EN 15681-1:2016 | Identical |
| NEN EN 15681-1 : 2016 | Identical |
| SN EN 15681-1 : 2016 | Identical |
| NF EN 15681-1 : 2016 | Identical |
| NS EN 15681-1 : 2016 | Identical |
| DIN EN 15681-1:2016-06 | Identical |
| UNE-EN 15681-1:2017 | Identical |
| 17/30356436 DC : 0 | BS EN 16612 - GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| DIN EN 16477-1:2017-07 | GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS |
| BS EN 15681-2:2017 | Glass in Building. Basic alumino silicate glass products Product standard |
| 17/30351893 DC : 0 | BS EN 17074 - GLASS IN BUILDING - ENVIRONMENTAL PRODUCT DECLARATION - PRODUCT CATEGORY RULES FOR FLAT GLASS PRODUCTS |
| DIN EN 15681-2:2015-07 (Draft) | GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD |
| PREN 16612 : DRAFT 2017 | GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| PREN 14449 : DRAFT 2017 | GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD |
| UNE-EN 15681-2:2017 | Glass in Building - Basic alumino silicate glass products - Part 2: Product standard |
| UNE-EN 16477-1:2017 | Glass in building - Painted glass for internal use - Part 1: Requirements |
| EN 15681-2:2017 | Glass in Building - Basic alumino silicate glass products - Part 2: Product standard |
| I.S. EN 15681-2:2017 | GLASS IN BUILDING - BASIC ALUMINO SILICATE GLASS PRODUCTS - PART 2: PRODUCT STANDARD |
| 16/30302167 DC : 0 | BS EN 1568-4 - FIRE EXTINGUISHING MEDIA - FOAM CONCENTRATES - PART 4: SPECIFICATION FOR LOW EXPANSION FOAM CONCENTRATES FOR SURFACE APPLICATION TO WATER-MISCIBLE LIQUIDS |
| DIN EN 16477-1:2016-07 (Draft) | GLASS IN BUILDING - PAINTED GLASS FOR INTERNAL USE - PART 1: REQUIREMENTS |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| PREN 16612 : DRAFT 2017 | GLASS IN BUILDING - DETERMINATION OF THE LATERAL LOAD RESISTANCE OF GLASS PANES BY CALCULATION |
| EN 1288-3:2000 | Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending) |
| EN ISO 15681-2:2004 | Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2003) |
| EN 1288-5:2000 | Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas |
| EN 1288-4:2000 | Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass |
| EN 1288-1:2000 | Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass |
| ISO 9385:1990 | Glass and glass-ceramics Knoop hardness test |
| EN 1288-2:2000 | Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.