EN 1591-2:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters
15-03-2022
11-06-2008
Foreword
1 Scope
2 Normative references
3 Symbols and definitions
4 Typical gasket parameters for various gasket styles
4.1 General
4.2 varrho[min[L]], varrho[Smin[L]]
4.3 Q[smax] and P[QR]
4.4 E[G]
Annex A (informative) - Relation between the gasket
types and the codes used in the tables
Annex B (informative) - Public sources of reliable data
Annex C (informative) - Outline of a pre-calculation
method of gasket selection
Bibliography
This European Standard details generic gasket parameters for use in EN 1591 1 during preliminary calculations during which the type of gasket to be used in an application is to be decided. Once the gasket type has been decided the parameters for gaskets of that type from the different potential commercial suppliers should be used in further calculations as within a gasket type there will be differences depending upon the supplier.WARNING - For the final calculations using the method given in EN 1591 1 the reader is directed to obtain gasket parameters for the selected type from the intended gasket supplier.
| Committee |
CEN/TC 74
|
| DevelopmentNote |
Supersedes ENV 1591-2. (08/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 1591-2:2008-09 | Identical |
| NS EN 1591-2 : 1ED 2008 | Identical |
| NEN EN 1591-2 : 2008 | Identical |
| I.S. EN 1591-2:2008 | Identical |
| BS EN 1591-2:2008 | Identical |
| NBN EN 1591-2 : 2008 | Identical |
| NF EN 1591-2 : 2008 | Identical |
| UNE-EN 1591-2:2010 | Identical |
| PN EN 1591-2 : 2008 | Identical |
| UNI EN 1591-2 : 2009 | Identical |
| SN EN 1591-2 : 2008 | Identical |
| PREN 13555 : DRAFT 2011 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| DIN EN 12007-3:2015-07 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
| DIN EN 1591-1:2014-04 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
| 99/707160 DC : DRAFT APR 99 | DRAFT BS: PREN 13480-3 - METALLIC INDUSTRIAL PIPING - DESIGN AND CALCULATION |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| BS EN 1591-1:2013 | Flanges and their joints. Design rules for gasketed circular flange connections Calculation |
| I.S. EN 13555:2014 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| I.S. EN 1591-1:2013 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
| I.S. EN 12007-3:2015 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
| VDI 3462 Blatt 1:2014-12 | Emission control - Wood machining and processing - Raw wood processing |
| VDI 2290:2012-06 | Emission control - Sealing constants for flange connections |
| 12/30247796 DC : DRAFT JAN 2012 | BS EN 1591-1 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATIONS |
| 11/30248108 DC : 0 | BS EN 13555 - FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| I.S. EN 13480-3:2017 | METALLIC INDUSTRIAL PIPING - PART 3: DESIGN AND CALCULATION |
| UNE-EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| UNI EN 1591-1 : 2014 | FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| BS EN 13555:2014 | Flanges and their joints. Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| BS EN 13480-3:2017 | Metallic industrial piping Design and calculation |
| UNE-EN 1591-1:2014 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
| BS EN 12007-3:2000 | Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
| UNE-EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN 1591-1:2013 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| DIN EN 13555:2014-07 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| UNI EN 13555 : 2014 | FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
| EN 1591-1:2013 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
| EN 13555:2014 | Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.