EN 2267-010:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard
30-06-2019
09-08-2017
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Materials and construction
5 Required characteristics
6 Quality assurance
7 Designation
8 Identification and marking
9 Packaging, labelling and delivery lengths
10 Technical specification
This European Standard specifies the characteristics of UV laser printable electrical lightweight wires DR family for use in the on-board 115 V (phase to neutral) or 200 V (phase to phase) AC electrical systems of aircraft at operating temperatures between 65 °C and 260 °C. These cables are demonstrated to be arc resistant in sizes AWG 26 to 14 (115/200 V AC).In addition, these cables may be suitable for use at 230/400 V AC in pressurised zones only when installed to take account of possible short circuit effects.It shall also be possible to mark these cables by qualified compatible marking. These markings shall satisfy the requirements of EN 3838.
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 2267-010. (09/2017)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
I.S. EN 2267-010:2018 | Identical |
NS EN 2267-010 : 2017 | Identical |
UNE-EN 2267-010:2017 | Identical |
NS EN 2267-010 : 2018 | Identical |
ONORM EN 2267-010 : 2017 | Identical |
NEN EN 2267-010 : 2017 | Identical |
BS EN 2267-010:2017 | Identical |
PN-EN 2267-010 : 2019-03 | Identical |
NBN EN 2267-010 : 2014 | Identical |
I.S. EN 2267-010:2017 | Identical |
NEN-EN 2267-010:2018 en | Identical |
DIN EN 2267-010:2014-03 | Identical |
ÖNORM EN 2267-010:2019 | Identical |
SN EN 2267-010 : 2017 | Identical |
NF EN 2267-010 : 2017 | Identical |
DIN EN 2267-010:2019-02 | Identical |
UNI EN 2267-010 : 2014 | Identical |
UNI EN 2267-010:2017 | Identical |
PNE-FprEN 2267-010 | Identical |
11/30242768 DC : 0 | Identical |
PN EN 2267-010 : 2017 | Identical |
BS EN 4674-001:2017 | Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve Technical specification |
PREN 2714-013 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 013: DR FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
I.S. EN 4674-001:2017 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION |
I.S. EN 6059-406:2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
I.S. EN 2267-002:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
I.S. EN 2714-013:2017 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 013: DR FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
I.S. EN 4057-402:2014 | AEROSPACE SERIES - CABLE TIES FOR HARNESSES - TEST METHODS - PART 402: LIFE CYCLE |
12/30259524 DC : 0 | BS EN 4057-402 - AEROSPACE SERIES - CABLE TIES FOR HARNESSES - TEST METHODS - PART 402: LIFE CYCLE |
12/30259525 DC : 0 | BS EN 6059-406 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
BS EN 6059-406:2014 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Vibration |
09/30199821 DC : 0 | BS EN 2267-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
PREN 4674-001 : DRAFT 2015 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION |
PREN 2267-002 : 200P5 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
BS EN 4057-402:2014 | Aerospace series. Cable ties for harnesses. Test methods Life cycle |
EN 2267-002:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General |
UNI EN 6059-406 : 2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
BS EN 6059-502:2014 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Resistance to electrical arcs |
13/30281823 DC : 0 | BS EN 2267-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
PREN 4057-402 : 200P2 | AEROSPACE SERIES - CABLE TIES FOR HARNESSES - TEST METHODS - PART 402: LIFE CYCLE |
BS EN 2714-013:2017 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 260 °C DR family, screened (spiral) and jacketed, UV laser printable. Product standard |
EN 6059-406:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration |
EN 4674-001:2017 | Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification |
EN 6059-502:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 502: Resistance to electrical arcs |
EN 4057-402:2014 | Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle |
EN 2714-013:2017 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard |
14/30314814 DC : 0 | BS EN 4674-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - SELF-WRAPPING SHIELDING (EMI) PROTECTIVE SLEEVE - PART 001: TECHNICAL SPECIFICATION |
UNI EN 4057-402 : 2014 | AEROSPACE SERIES - CABLE TIES FOR HARNESSES - TEST METHODS - PART 402: LIFE CYCLE |
PREN 6059-406 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
PREN 6059-502 : 200P1 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 502: RESISTANCE TO ELECTRICAL ARCS |
I.S. EN 6059-502:2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 502: RESISTANCE TO ELECTRICAL ARCS |
BS EN 2267-002:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C General |
EN 3838:2010 | Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables |
EN 2267-002:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General |
TR 6058 : 2011 | AEROSPACE SERIES - CABLE CODE IDENTIFICATION LIST |
EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
EN 4434:2005 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) |
EN 2084:2015 | Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.