Skip to content
Please enter a keyword to search

  • EN 22768-1:1993

    Current The latest, up-to-date edition.

    General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)

    Available format(s): 

    Language(s): 

    Published date:  22-04-1993

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Cooperating organizations
    National foreword
    Foreword
    Introduction
    Specification
    1 Scope
    2 General
    3 Normative references
    4 General tolerances
    5 Indications on drawings
    6 Rejection
    Annexes
    A (informative) Concepts behind general tolerancing of
        linear and angular dimensions
    ZA (normative) Normative references to international
        publications with their relevant European
        publications
    Tables
    1 Permissible deviations for linear dimensions except
        for broken edges
    2 Permissible deviations for broken edges
    3 Permissible deviations of angular dimensions
    National annexes
    NA (informative) Committees responsible
    NB (informative) Cross-reference

    Abstract - (Show below) - (Hide below)

    This part is intended to simplify drawing indications and specifies general tolerances in four tolerance classes. It applies to the dimensions of workpieces that are produced by metal removal or are formed from sheet metal. It contains three tables and an informative annex with regard to concepts behind general tolerancing of dimensions.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/SS I03
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 15051-3:2013 Workplace exposure. Measurement of the dustiness of bulk materials Continuous drop method
    BS EN 4710-06:2015 Aerospace series. Quick release fastening systems for non-structural applications Stud. Quick-release and locking
    BS EN 62849:2016 Performance evaluation methods of mobile household robots
    BS EN 60335-2-91:2003 Specification for safety of household and similar electrical appliances Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
    16/30346577 DC : 0 BS EN 1305 - INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE
    07/30167667 DC : 0 BS EN 13613 - ROLLER SPORTS EQUIPMENT - SKATEBOARDS - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 50085-1 : 2005 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    12/30266561 DC : 0 BS EN 13451-10 - SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    PREN 1305 : DRAFT 2016 INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE
    08/30181446 DC : DRAFT JULY 2008 BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 62929:2014 Cleaning robots for household use. Dry cleaning: Methods of measuring performance
    BS EN 4710-04:2015 Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. One way tolerance compensation
    BS EN 4702-05:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer
    10/30234610 DC : DRAFT NOV 2010 BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    14/30301112 DC : 0 BS EN 50180-3 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENT FOR BUSHING FIXATIONS
    PREN 12726 : DRAFT 2017 PACKAGING - CORK MOUTH FINISH WITH A BORE DIAMETER OF 18,5 MM FOR CORKS AND TAMPER EVIDENT CAPSULES
    PREN 13454-2 : DRAFT 2017 BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS
    12/30258463 DC : 0 BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
    BS EN 60987:2015 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
    10/30234616 DC : 0 BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
    CEI EN 50336 : 2003 BUSHINGS FOR TRANSFORMERS AND REACTOR CABLE BOXES NOT EXCEEDING 36 KV
    BS EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations Particular requirements for slotted cable trunking systems intended for installation in cabinets
    BS EN 60335-2-71:2003 Household and similar electrical appliances. Safety Particular requirements for electrical heating appliances for breeding and rearing animals
    BS EN 1306:1996 Inland navigation vessels. Connections for the discharge of waste water
    I.S. EN 60335-2-16:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002 (MOD))
    PREN 12405-3 : DRAFT 2013 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    I.S. EN 62271-102:2005 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 102: ALTERNATING CURRENT DISCONNECTORS AND EARTHING SWITCHES (IEC 62271-102:2001 (EQV))
    BS EN 50446:2006 Straight thermocouple assembly with metal or ceramic protection tube and accessories
    I.S. EN 4702-05:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
    DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
    PREN 4702-05 : DRAFT 2016 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 05: RETAINING WASHER
    PREN 4702-04 : DRAFT 2016 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP
    I.S. EN 62929:2014 CLEANING ROBOTS FOR HOUSEHOLD USE - DRY CLEANING: METHODS OF MEASURING PERFORMANCE
    I.S. EN 60335-2-99:2003/A1:2019 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
    I.S. EN 4710-07:2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET
    I.S. EN 4710-06:2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING
    I.S. EN 60335-2-28:2003&A1:2008&A11:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
    BS EN 50180-3 : 2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS
    I.S. EN 14619:2015 ROLLER SPORTS EQUIPMENT - KICK SCOOTERS - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 60335-2-74:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
    UNE-EN 16404:2016 Railway applications - Re-railing and recovery requirements for railway vehicles
    I.S. EN 13451-10:2014 SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    NF EN 50216-12 : 2011 POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS
    I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    17/30357424 DC : 0 BS EN 13454-2 - BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULPHATE - PART 2: TEST METHODS
    DIN EN 13236:2016-05 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    EN 12261:2018 Gas meters - Turbine gas meters
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
    DIN EN 13261:2011-01 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
    DIN EN 13613:2009-08 ROLLER SPORTS EQUIPMENT - SKATEBOARDS - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 12881-1 E : 2015 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
    BS EN 14200:2004 Railway applications. Suspension components. Parabolic springs, steel
    BS EN 13899:2003 Roller sports equipment. Roller skates. Safety requirements and test methods
    BS EN 14420-5:2013 Hose fittings with clamp units Threaded connections
    UNE-EN 16865:2017 Inland navigation vessels - Connections and assembled hoses for the transfer of potable water
    BS EN ISO 9100-11:2005 Glass containers. Vacuum lug finishes 82 regular
    BS EN 15340:2007 Thermal spraying. Determination of shear load resistance of thermally sprayed coatings
    BS EN 13261 : 2009 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
    UNE-EN 16313:2014 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
    BS EN 14420-3:2013 Hose fittings with clamp units Clamp units, bolted or pinned
    BS EN 14420-7:2013 Hose fittings with clamp units Cam locking couplings
    I.S. EN 413-2:2016 MASONRY CEMENT - PART 2: TEST METHODS
    DIN EN 13411-5:2009-02 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    DIN EN ISO 9100-6:2005-04 Glass containers - Vacuum lug finishes - Part 6: 53 and 58 regular (ISO 9100-6:2005); German version EN ISO 9100-6:2005
    EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods
    DIN EN ISO 9100-9:2005-04 Glass containers - Vacuum lug finishes - Part 9: 63, 66 and 70 deep (ISO 9100-9:2005); German version EN ISO 9100-9:2005
    EN 60335-2-99:2003 Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
    EN 12827:1999 Inland navigation vessels - Connections for the transfer of diesel oil
    DIN EN 14800:2007-06 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
    EN 60335-2-39:2003/A2:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
    EN 12805:2002 Automotive LPG components - Containers
    EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
    EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets
    DIN EN 13451-10:2014-05 SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    EN 12339:1997 Inland navigation vessels - Rope tubs
    EN 50085-1 : 2005 AMD 1 2013 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 62849:2016 Performance evaluation methods of mobile household robots
    EN 60335-2-84:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
    DIN EN 1069-1:2017-11 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    EN 60335-2-38:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
    EN 13451-7:2001 Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals
    EN 60335-2-12 : 2003 AMD 1 2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
    EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
    CEI EN 62841-1 : 2016 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    09/30195277 DC : 0 BS EN 13451-1 - SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 16451:2015 Railway applications. Braking. Brake pad holder
    I.S. EN 4702-03:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
    08/30167693 DC : DRAFT NOV 2008 BS EN 50085-2-3 - CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR SLOTTED CABLE TRUNKING SYSTEMS INTENDED FOR INSTALLATION IN CABINETS
    PREN 12405-1 : DRAFT 2017 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    DIN EN 16451:2015-09 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
    PREN 711 : DRAFT 2015 INLAND NAVIGATION VESSELS - RAILINGS FOR DECKS AND SIDE DECKS - REQUIREMENTS, TYPES
    10/30234631 DC : 0 BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
    10/30234613 DC : DRAFT NOV 2010 BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
    BS EN 16404:2016 Railway applications. Re-railing and recovery requirements for railway vehicles
    00/712968 DC : DRAFT AUG 2000 ROLLER SPORTS EQUIPMENT - ROLLER SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    04/30121837 DC : DRAFT SEP 2004 EN 50085-1 - CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    EN 4702-05:2017 Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
    DIN EN 16327:2014-07 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
    PREN 13451-1 : DRAFT 2009 SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    10/30234628 DC : 0 BS EN 14420-6 - HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
    CEI EN 50085-2-3 : 2010 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR SLOTTED CABLE TRUNKING SYSTEMS INTENDED FOR INSTALLATION IN CABINETS
    UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
    PREN 14420-6 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
    UNE-EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion
    PREN 1306 : DRAFT 2016 INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER
    I.S. EN 13454-2:2004 BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS
    I.S. EN 60335-2-47:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002 (EQV))
    BS EN 60335-2-88:2002 Specification for safety of household and similar electrical appliances. Particular requirements Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
    UNI EN 12405-1 : 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    UNE-EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
    UNE-EN 50180-3:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 3: Requirements for bushing fixations
    EN 1305:2018 Inland navigation vessels - Connections for the discharge of oily mixture
    I.S. EN 1069-1:2017 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 60335-2-82:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
    I.S. EN 62849:2016 PERFORMANCE EVALUATION METHODS OF MOBILE HOUSEHOLD ROBOTS
    I.S. EN 60335-2-81:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335 -2-81:2002 (EQV))
    I.S. EN 50085-2-3:2010 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR SLOTTED CABLE TRUNKING SYSTEMS INTENDED FOR INSTALLATION IN CABINETS
    DIN EN 14619 E : 2015 ROLLER SPORTS EQUIPMENT - KICK SCOOTERS - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 60335-2-9:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-9: PARTICULAR REQUIREMENTS FOR GRILLS, TOASTERS AND SIMILAR PORTABLE COOKING APPLIANCES (IEC 60335-2-9:2002 (MOD))
    I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    UNE-EN 16327:2015 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
    EN 12726:2000 PACKAGING - CORK MOUTH FINISH WITH A BORE DIAMETER OF 18,5 MM FOR CORKS AND TAMPER EVIDENT CAPSULES
    EN 60335-2-74:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-74: PARTICULAR REQUIREMENTS FOR PORTABLE IMMERSION HEATERS
    BS EN 60335-2-12 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
    I.S. EN 50216-12:2011 POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS
    EN 60987:2015 Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems
    I.S. EN 60335-2-48:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL GRILLERS AND TOASTERS (IEC 60335-2-48:2002 (EQV))
    EN 60335-2-9:2003/A13:2010/AC:2012 Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
    I.S. EN 12261:2002 GAS METERS - TURBINE GAS METERS
    DIN EN 13411-5 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    DIN EN 12881-1:2015-10 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
    UNE-EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
    BS EN 14619:2015 Roller sports equipment. Kick scooters. Safety requirements and test methods
    UNE-EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
    BS EN 13056:2000 Inland navigation vessels. Stairs with inclination angles of 30 degrees to < 45 degrees. Requirements, types
    UNE-EN 15051-3:2014 Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method
    BS EN ISO 9100-7:2005 Glass containers. Vacuum lug finishes 58 deep
    BS EN 12881-1:2014 Conveyor belts. Fire simulation flammability testing Propane burner tests
    BS EN ISO 12209-2:2001 Gas cylinders. Outlet connections for gas cylinder valves for compressed breathable air Threaded connections
    ISO 9100-12:2005 Glass containers Vacuum lug finishes Part 12: 89 regular
    BS EN 1914:2016 Inland navigation vessels. Work boats, ship\'s boats and lifeboats
    I.S. EN 14420-5:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
    EN 62929:2014 Cleaning robots for household use - Dry cleaning: Methods of measuring performance
    I.S. EN 14420-6:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
    I.S. EN 13843:2009 ROLLER SPORTS EQUIPMENT - INLINE-SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN ISO 9100-12:2005-04 Glass containers - Vacuum lug finishes - Part 12: 89 regular (ISO 9100-12:2005); German version EN ISO 9100-12:2005
    I.S. EN 14420-8:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
    I.S. EN 1914:2016 INLAND NAVIGATION VESSELS - WORK BOATS, SHIP'S BOATS AND LIFEBOATS
    DIN EN ISO 9100-13:2005-04 Glass containers - Vacuum lug finishes - Part 13: 100 regular (ISO 9100-13:2005); German version EN ISO 9100-13:2005
    DIN EN 14420-8:2016-06 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
    DIN EN 14420-3:2013-09 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    DIN EN ISO 9100-11:2005-04 Glass containers - Vacuum lug finishes - Part 11: 82 regular (ISO 9100-11:2005); German version EN ISO 9100-11:2005
    I.S. EN 13613:2009 ROLLER SPORTS EQUIPMENT - SKATEBOARDS - SAFETY REQUIREMENTS AND TESTS METHODS
    I.S. EN 246:2003 SANITARY TAPWARE - GENERAL SPECIFICATION FOR FLOW RATE REGULATORS
    I.S. EN 22768-2:1994 GENERAL TOLERANCES - GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
    DIN EN ISO 9100-10:2005-04 Glass containers - Vacuum lug finishes - Part 10: 77 regular (ISO 9100-10:2005); German version EN ISO 9100-10:2005
    DIN EN 14420-5:2013-09 HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
    DIN EN 14420-7:2013-09 Hose fittings with clamp units - Part 7: Cam locking couplings
    EN 22768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
    I.S. EN 12881-1:2014 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
    EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
    DIN EN ISO 9100-14:2009-05 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 14: 110 REGULAR
    DIN EN 14420-6:2013-09 Hose fittings with clamp units - Part 6: TW tank truck couplings
    I.S. EN 14420-3:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    DIN EN 14420-4:2013-09 Hose fittings with clamp units - Part 4: Flange connections
    I.S. EN 14420-4:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
    I.S. EN 13411-5:2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    I.S. EN 14420-7:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
    UNI EN 13843 : 2009 ROLLER SPORTS EQUIPMENT - INLINE-SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 16865:2016 Inland navigation vessels. Connections and assembled hoses for the transfer of potable water
    I.S. EN 60987:2015 NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - HARDWARE DESIGN REQUIREMENTS FOR COMPUTER-BASED SYSTEMS
    I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
    BS EN 61386-24:2010 Conduit systems for cable management Particular requirements. Conduit systems buried underground
    BS EN 16313:2013 Connections for heating and cooling appliances. Detachable connection with outside threaded pipe G ¾ A and inside cone
    13/30289289 DC : 0 BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 4702-03:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking
    CEI EN 62849 : 1ED 2017 PERFORMANCE EVALUATION METHODS OF MOBILE HOUSEHOLD ROBOTS
    00/707305 DC : DRAFT APR 2000 ROLLER SPORTS EQUIPMENT - INLINE SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 15051:2006 WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - REQUIREMENTS AND REFERENCE TEST METHODS
    15/30317558 DC : 0 BS EN 16404 - RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES
    11/30252476 DC : 0 BS EN 15051-3 - WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD
    BS EN 4702-04:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Spring clamp
    12/30259188 DC : 0 BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
    BS EN 60335-2-99:2003 Specification for safety of household and similar electrical appliances Particular requirements for commercial electric hoods
    BS EN 50193-1:2013 Electric instantaneous water heaters General requirements
    DIN EN 16313:2013-08 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G 3/4 A and inside cone
    I.S. EN 4710-05:2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION
    12/30249755 DC : DRAFT JULY 2012 BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - GENERAL REQUIREMENTS
    UNI EN 16327 : 2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
    DIN EN 15051-3:2014-03 WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD
    15/30317833 DC : 0 BS EN 711 - INLAND NAVIGATION VESSELS - RAILINGS FOR DECKS AND SIDE DECKS - REQUIREMENTS, TYPES
    00/563156 DC : DRAFT JULY 2000 PREN ISO 12402-9 - PERSONAL FLOTATION DEVICES - PART 9: TEST METHODS FOR CLASSES A TO F
    16/30333511 DC : 0 BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
    06/30155635 DC : 0 EN 13261 - RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
    EN 4702-03 : 2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
    BS EN 60335-2-10 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
    UNE-EN 62849:2017 Performance evaluation methods of mobile household robots
    PREN 4702-03 : DRAFT 2016 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS WITH NON METALLIC STUD FOR NON-STRUCTURAL APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
    I.S. EN 16313:2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
    UNE-EN 13451-10:2014 Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
    I.S. EN 60335-2-59:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
    BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    I.S. EN 60068-2-75:2014 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS
    I.S. EN 4710-04:2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION
    PREN 14420-4 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
    I.S. EN 16865:2016 INLAND NAVIGATION VESSELS - CONNECTIONS AND ASSEMBLED HOSES FOR THE TRANSFER OF POTABLE WATER
    I.S. EN 12405-1:2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    I.S. EN 60335-2-39:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-39: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC MULTI-PURPOSE COOKING PANS
    EN 13451-10:2014 Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
    UNE-EN 62929:2014 Cleaning robots for household use - Dry cleaning: Methods of measuring performance
    I.S. EN 16404:2016 RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES
    I.S. EN 60335-2-26:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-26: PARTICULAR REQUIREMENTS FOR CLOCKS
    BS EN 60335-2-50 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE
    PREN 13451-10 : DRAFT 2016 SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    DIN EN 1069-1:2015-09 (Draft) WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    EN 4702-04 : 2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP
    I.S. EN 50180-3:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS
    EN 12405-1:2005+A2:2010 Gas meters - Conversion devices - Part 1: Volume conversion
    EN 60335-2-48 : 2003 AMD 11 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS (IEC 60335-2-48:2002)
    BS EN 12726:2000 Packaging. Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
    I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    I.S. EN 60335-2-91:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-91: PARTICULAR REQUIREMENTS FOR WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS
    EN 60335-2-16:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-16: PARTICULAR REQUIREMENTS FOR FOOD WASTE DISPOSERS (IEC 60335-2-16:2002/A2:2011)
    I.S. EN 60335-2-80:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
    DIN EN 1929-2:2005-03 Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors; German version EN 1929-2:2004
    DIN EN 14800 E : 2007 CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION OF DOMESTIC APPLIANCES USING GASEOUS FUELS
    DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
    DIN EN 15340 E : 2007 THERMAL SPRAYING - DETERMINATION OF SHEAR LOAD RESISTANCE OF THERMALLY SPRAYED COATINGS
    BS EN 413-2:2016 Masonry cement Test methods
    ISO 9100-7:2005 Glass containers Vacuum lug finishes Part 7: 58 deep
    ISO 9100-8:2005 Glass containers Vacuum lug finishes Part 8: 63, 66 and 70 regular
    UNE-EN 14420-7:2014 Hose fittings with clamp units - Part 7: Cam locking couplings
    BS EN 246:2003 Sanitary tapware. General specifications for flow rate regulators
    BS EN 837-1:1998 Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing
    EN 837-1:1996/AC:1998 PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
    I.S. EN 837-1:1997 PRESSURE GAUGES - PART 1: BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
    EN 60335-2-28:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-28: PARTICULAR REQUIREMENTS FOR SEWING MACHINES
    UNI EN 13261 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
    EN 13261:2009+A1:2010 Railway applications - Wheelsets and bogies - Axles - Product requirements
    EN 13454-2:2003+A1:2007 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods
    EN 4710-07 : 2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 07: RETAINING GROMMET
    EN ISO 9100-12 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 12: 89 REGULAR
    EN ISO 9100-5 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 5: 43 AND 48 REGULAR
    EN ISO 9100-10 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 10: 77 REGULAR
    UNI EN 12881-1 : 2014 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
    UNI EN 14420-6 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 6: TW TANK TRUCK COUPLINGS
    UNI EN 13613 : 2009 ROLLER SPORTS EQUIPMENT - SKATEBOARDS - SAFETY REQUIREMENTS AND TESTS METHODS
    EN 413-2:2016 Masonry cement - Part 2: Test methods
    UNI EN 13236 : 2011 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    UNI EN 13411-5 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    UNI EN ISO 9100-14 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 14: 110 REGULAR
    UNI EN 15051-3 : 2014 WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD
    UNI EN 16313 : 2013 CONNECTIONS FOR HEATING AND COOLING APPLIANCES - DETACHABLE CONNECTION WITH OUTSIDE THREADED PIPE G 3/4 A AND INSIDE CONE
    UNI EN 14800 : 2007 CORRUGATED SAFETY METAL HOSE ASSEMBLIES FOR THE CONNECTION DOMESTIC APPLIANCES USING GASEOUS FUELS
    UNI EN 14420-7 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
    UNI EN 14420-3 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    UNI EN 14420-5 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS
    UNI EN 14420-4 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
    UNE-EN 1914:2017 Inland navigation vessels - Work boats, ship’s boats and lifeboats
    PREN 13236 : DRAFT 2017 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    PREN 50193-1 : DRAFT 2016 ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
    BS EN 13236 : 2010 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    BS EN 12405-3:2015 Gas meters. Conversion devices Flow computer
    EN 50336:2002 Bushings for transformers and reactor cable boxes not exceeding 36 kV
    16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    I.S. EN 61386-24:2010 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND
    07/30162409 DC : 0 BS EN 1509 - PLAYING FIELD EQUIPMENT - BADMINTON EQUIPMENT - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS
    16/30346574 DC : 0 BS EN 1306 - INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER
    DIN EN 13454-2:2007-11 BINDERS, COMPOSITE BINDERS AND FACTORY MADE MIXTURES FOR FLOOR SCREEDS BASED ON CALCIUM SULFATE - PART 2: TEST METHODS
    17/30359229 DC : DRAFT SEP 2017 BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    PREN 16404 : DRAFT 2015 RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES
    BS EN 16327:2014 Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
    PREN 14420-7 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
    BS EN 4710-07:2015 Aerospace series. Quick release fastening systems for non-structural applications Retaining grommet
    BS EN 60068-2-75:2014 Environmental testing Tests. Test Eh: Hammer tests
    DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 13451-10:2014 Swimming pool equipment Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
    BS EN 50336:2002 Bushings for transformers and reactor cable boxes not exceeding 36 kV
    10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    03/118601 DC : DRAFT JAN 2004 EN 14874 - INLAND NAVIGATION VESSELS - STUDLESS ANCHOR CHAIN - CABLE LIFTER
    16/30341161 DC : 0 BS EN 13451-10 - SWIMMING PL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    I.S. EN 60335-2-10:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
    I.S. EN 15051-2:2013 WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 2: ROTATING DRUM METHOD
    I.S. EN 60335-2-86:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-86: PARTICULAR REQUIREMENTS FOR ELECTRIC FISHING MACHINES
    I.S. EN 60335-2-38:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-38: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRIDDLES AND GRIDDLE GRILLS
    I.S. EN 4702-04:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 04: SPRING CLAMP
    I.S. EN 60335-2-12:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-12: PARTICULAR REQUIREMENTS FOR WARMING PLATES AND SIMILAR APPLIANCES
    EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
    CEI EN 50193-1 : 2015 ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
    CEI EN 61386-24 : 2011 CONDUIT SYSTEMS FOR CABLE MANAGEMENT - PART 24: PARTICULAR REQUIREMENTS - CONDUIT SYSTEMS BURIED UNDERGROUND
    UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    DIN EN 13451-10:2016-08 (Draft) SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    EN 13236:2010+A1:2015 Safety requirements for superabrasive products
    I.S. EN 60335-2-45:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002 (EQV))
    I.S. EN 60335-2-41:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS
    I.S. EN 60335-2-84:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-84: PARTICULAR REQUIREMENTS FOR TOILETS
    NF EN 13261 : 2009 + A1 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - AXLES - PRODUCT REQUIREMENTS
    I.S. EN 1305:1996 INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF OILY MIXTURE
    EN 60335-2-47:2003/A11:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS (IEC 60335-2-47:2002)
    I.S. EN 1306:1996 INLAND NAVIGATION VESSELS - CONNECTIONS FOR THE DISCHARGE OF WASTE WATER
    EN 60335-2-59:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-59: PARTICULAR REQUIREMENTS FOR INSECT KILLERS
    EN 60335-2-82:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-82: PARTICULAR REQUIREMENTS FOR AMUSEMENT MACHINES AND PERSONAL SERVICE MACHINES
    DIN EN 13843:2009-08 ROLLER SPORTS EQUIPMENT - INLINE-SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 14786 E : 2007 PROTECTIVE CLOTHING - DETERMINATION OF RESISTANCE TO PENETRATION BY SPRAYED LIQUID CHEMICALS, EMULSIONS AND DISPERSIONS - ATOMIZER TEST
    BS EN 13613:2009 Roller sports equipment. Skateboards. Safety requirements and tests methods
    BS EN ISO 9100-5:2005 Glass containers. Vacuum lug finishes 43 and 48 regular
    BS EN 12805:2002 Automotive LPG components. Containers
    UNE-EN 246:2004 Sanitary tapware. General specifications for flow rate regulators.
    ISO 9100-13:2005 Glass containers Vacuum lug finishes Part 13: 100 regular
    BS EN 13411-5 : 2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    BS EN 395:1995 Lifejackets and personal buoyancy aids. Lifejacket 100
    BS EN 790:2001 Inland navigation vessels. Stairs with inclination angles of 45° to 60°. Requirements, types
    BS EN 837-3:1998 Pressure gauges Diaphragm and capsule pressure gauges. Dimensions, metrology, requirements and testing
    BS EN 14786:2006 Protective clothing. Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions. Atomizer test
    BS EN 15051:2006 Workplace atmospheres. Measurement of the dustiness of bulk materials. Requirements and reference test methods
    BS EN ISO 9100-6:2005 Glass containers. Vacuum lug finishes 53 and 58 regular
    BS EN ISO 9100-8:2005 Glass containers. Vacuum lug finishes 63, 66 and 70 regular
    ISO 9100-10:2005 Glass containers Vacuum lug finishes Part 10: 77 regular
    ISO 2768-2:1989 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
    BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
    BS EN 1069-1:2017 Water slides Safety requirements and test methods
    BS EN 13451-7:2001 Swimming pool equipment Additional specific safety requirements and test methods for water polo goals
    BS EN 1929-2:2004 Basket trolleys Requirements, tests and inspection for basket trolleys with of without a child carrying facility, intended to be used on passenger conveyors
    ISO 9100-11:2005 Glass containers Vacuum lug finishes Part 11: 82 regular
    BS EN 12827:1999 Inland navigation vessels. Connections for the transfer of diesel oil
    UNE-EN 14619:2015 Roller sports equipment - Kick scooters - Safety requirements and test methods
    BS EN ISO 9100-10:2005 Glass containers. Vacuum lug finishes 77 regular
    ISO 9100-14:2005 Glass containers Vacuum lug finishes Part 14: 110 regular
    ISO 9100-5:2005 Glass containers Vacuum lug finishes Part 5: 43 and 48 regular
    UNE-EN 14420-5:2014 Hose fittings with clamp units - Part 5: Threaded connections
    BS EN 14420-4:2013 Hose fittings with clamp units Flange connections
    UNE-EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements
    BS EN 13190:2001 Dial thermometers
    BS EN 14420-6:2013 Hose fittings with clamp units TW tank truck couplings
    ISO 9100-6:2005 Glass containers Vacuum lug finishes Part 6: 53 and 58 regular
    BS EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
    DIN EN 15340:2007-06 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
    BS EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements
    UNE-EN 14420-3:2014 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
    ISO 9100-9:2005 Glass containers Vacuum lug finishes Part 9: 63, 66 and 70 deep
    EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
    EN 13899:2003 Roller sports equipment - Roller skates - Safety requirements and test methods
    EN 15340:2007 Thermal spraying - Determination of shear load resistance of thermally sprayed coatings
    EN 4710-04 : 2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 04: SPRING CLAMP - ONE WAY TOLERANCE COMPENSATION
    EN ISO 9100-6 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 6: 53 AND 58 REGULAR
    EN ISO 9100-9 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 9: 63, 66 AND 70 DEEP
    EN 4710-05 : 2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 05: SPRING CLAMP - TWO WAYS TOLERANCE COMPENSATION
    EN 1929-2:2004 Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors
    EN 14786:2006 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
    EN 16451:2015 Railway applications - Braking - Brake pad holder
    EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
    EN ISO 9100-14:2005/AC:2009 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO 9100-14:2005/Cor 1:2008)
    EN 1914:2016 Inland navigation vessels - Work boats, ship’s boats and lifeboats
    EN ISO 9100-8 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 8: 63, 66 AND 70 REGULAR
    EN 13843:2009 Roller sports equipment - Inline-skates - Safety requirements and test methods
    EN 13613:2009 Roller sports equipment - Skateboards - Safety requirements and tests methods
    EN 16404:2016 Railway applications - Re-railing and recovery requirements for railway vehicles
    EN 16865:2016 Inland navigation vessels - Connections and assembled hoses for the transfer of potable water
    EN 14420-4:2013 Hose fittings with clamp units - Part 4: Flange connections
    EN 14420-5:2013 Hose fittings with clamp units - Part 5: Threaded connections
    EN 14420-7:2013 Hose fittings with clamp units - Part 7: Cam locking couplings
    EN ISO 9100-13 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 13: 100 REGULAR
    EN 790:2001 Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types
    EN 14200:2004 Railway applications - Suspension components - Parabolic springs, steel
    EN 16313:2013 Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone
    EN 15051-3:2013 Workplace exposure - Measurement of the dustiness of bulk materials - Part 3: Continuous drop method
    EN 15051-2:2013+A1:2016 Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method
    EN 4710-06 : 2015 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL APPLICATIONS - PART 06: STUD - QUICK-RELEASE AND LOCKING
    EN 14800:2007 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
    EN 399:1993/A1:1998 LIFEJACKETS AND PERSONAL BUOYANCY AIDS - LIFEJACKETS - 275 N
    EN ISO 9100-11 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 11: 82 REGULAR
    EN 16327:2014 Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)
    EN 14420-8:2013+A1:2016 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
    EN 14420-6:2013 Hose fittings with clamp units - Part 6: TW tank truck couplings
    EN ISO 9100-7 : 2005 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 7: 58 DEEP
    EN 393:1993/A1:1998 LIFEJACKETS AND PERSONAL BUOYANCY AIDS - BUOYANCY AIDS 50
    EN 14420-3:2013 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
    DIN EN 50446:2007-04 STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
    I.S. EN 16327:2014 FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS)
    DIN EN 16404 E : 2016 RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES
    BS EN 50216-12:2011 Power transformer and reactor fittings Fans
    PREN 14420-3 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    15/30325361 DC : 0 BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 4710-05:2015 Aerospace series. Quick release fastening systems for non-structural applications Spring clamp. Two ways tolerance compensation
    PREN 14619 : DRAFT 2013 ROLLER SPORTS EQUIPMENT - KICK SCOOTERS - SAFETY REQUIREMENTS AND TEST METHODS
    DIN EN 16404:2016-05 RAILWAY APPLICATIONS - RE-RAILING AND RECOVERY REQUIREMENTS FOR RAILWAY VEHICLES
    I.S. EN 60335-2-50:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPARATUS - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE
    DIN EN 16451 E : 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
    04/30123974 DC : DRAFT OCT 2004 EN 50446 - STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
    17/30356728 DC : 0 BS EN 12261 - GAS METERS - TURBINE GAS METERS
    EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
    14/30301109 DC : 0 BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
    13/30282887 DC : 0 BS EN 14619 - ROLLER SPORTS EQUIPMENT - KICK SCOOTERS - SAFETY REQUIREMENTS AND TEST METHODS
    07/30167664 DC : 0 BS EN 13843 - ROLLER SPORTS EQUIPMENT - INLINE-SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    PREN 14420-8 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
    PREN 12261 : DRAFT 2017 GAS METERS - TURBINE GAS METERS
    CEI EN 50446 : 2007 STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
    DIN EN 14619:2015-06 ROLLER SPORTS EQUIPMENT - KICK SCOOTERS - SAFETY REQUIREMENTS AND TEST METHODS
    PREN 1069-1 : DRAFT 2015 WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 13454-2:2003 Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate Test methods
    EN 60335-2-73 : 2003 AMD 2 2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
    I.S. EN 60335-2-23:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE
    I.S. EN 50193-1:2016 ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
    I.S. EN 16451:2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
    I.S. EN 15051-3:2013 WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 3: CONTINUOUS DROP METHOD
    I.S. EN 60335-2-51:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002 (EQV))
    BS EN 15051-2 : 2013 WORKPLACE EXPOSURE - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - PART 2: ROTATING DRUM METHOD
    I.S. EN 60335-2-71:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
    BS EN 12405-1 : 2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    I.S. EN 50446:2006 STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
    I.S. EN 60335-2-99:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
    EN 1306:2018 Inland navigation vessels - Connections for the discharge of waste water
    17/30363990 DC : 0 BS EN 12726 - PACKAGING - CORK MOUTH FINISH WITH A BORE DIAMETER OF 18,5 MM FOR CORKS AND TAMPER EVIDENT CAPSULES
    UNI EN 13451-10 : 2014 SWIMMING POOL EQUIPMENT - PART 10: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR DIVING PLATFORMS, DIVING SPRINGBOARDS AND ASSOCIATED EQUIPMENT
    17/30356731 DC : 0 BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    EN 14619:2015 Roller sports equipment - Kick scooters - Safety requirements and test methods
    BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    I.S. EN 13236:2010 SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
    I.S. EN 50336:2002 BUSHINGS FOR TRANSFORMERS AND REACTOR CABLE BOXES NOT EXCEEDING 36 KV
    I.S. EN 60335-2-73:2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-73: PARTICULAR REQUIREMENTS FOR FIXED IMMERSION HEATERS
    I.S. EN 50085-1:2005 CABLE TRUNKING SYSTEMS AND CABLE DUCTING SYSTEMS FOR ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS
    UNE-EN 1069-1:2017 Water slides - Part 1: Safety requirements and test methods
    DIN EN 12405-1:2011-04 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    BS EN ISO 9100-9:2005 Glass containers. Vacuum lug finishes 63, 66 and 70 deep
    UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
    BS EN 14420-8 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
    BS EN 13843:2009 Roller sports equipment. Inline-skates. Safety requirements and test methods
    BS EN ISO 9100-12:2005 Glass containers. Vacuum lug finishes 89 regular
    BS EN 13574:2001 Inland navigation vessels. Permanently installed climbing devices with a length not exceeding 5 m
    BS EN 12339:1997 Inland navigation vessels. Rope tubs
    BS EN ISO 9100-14:2005 Glass containers. Vacuum lug finishes 110 regular
    BS EN ISO 9100-13:2005 Glass containers. Vacuum lug finishes 100 regular
    BS EN 393:1994 Lifejackets and personal buoyancy aids. Buoyancy aid 50
    EN 60335-2-81:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-81: PARTICULAR REQUIREMENTS FOR FOOT WARMERS AND HEATING MATS (IEC 60335-2-81:2002/A2:2011)
    DIN EN 14786:2007-03 Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test
    EN 60335-2-71 : 2003 AMD 1 2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-71: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEATING APPLIANCES FOR BREEDING AND REARING ANIMALS
    EN 50446:2006 Straight thermocouple assembly with metal or ceramic protection tube and accessories
    DIN EN ISO 9100-7:2005-04 Glass containers - Vacuum lug finishes - Part 7: 58 deep (ISO 9100-7:2005); German version EN ISO 9100-7:2005
    EN 246:2003 Sanitary tapware - General specifications for flow rate regulators
    EN 60335-2-80:2003/A2:2009 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS
    EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 9100-5:2005-06 GLASS CONTAINERS - VACUUM LUG FINISHES - PART 5: 43 AND 48 REGULAR
    EN 13056:2000 Inland navigation vessels - Stairs with inclination angles of 30° to < 45° - Requirements, types
    EN 60335-2-50:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-50: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BAINS-MARIE
    EN 60335-2-88:2002 Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
    EN 60335-2-91:2003 Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers
    EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    DIN EN 13899:2003-05 ROLLER SPORTS EQUIPMENT - ROLLER SKATES - SAFETY REQUIREMENTS AND TEST METHODS
    EN 50180-3 : 2015 AMD 1 2017 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 3: REQUIREMENTS FOR BUSHING FIXATIONS
    DIN EN ISO 9100-8:2005-04 Glass containers - Vacuum lug finishes - Part 8: 63, 66 and 70 regular (ISO 9100-8:2005); German version EN ISO 9100-8:2005
    EN 60335-2-10:2003/A1:2008 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
    EN 60335-2-51:2003/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-51: PARTICULAR REQUIREMENTS FOR STATIONARY CIRCULATION PUMPS FOR HEATING AND SERVICE WATER INSTALLATIONS (IEC 60335-2-51:2002/A2:2011)
    EN 60335-2-23:2003/A2:2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-23: PARTICULAR REQUIREMENTS FOR APPLIANCES FOR SKIN OR HAIR CARE (IEC 60335-2-23:2003/A2:2012, MODIFIED)
    DIN EN 15051:2006-07 WORKPLACE ATMOSPHERES - MEASUREMENT OF THE DUSTINESS OF BULK MATERIALS - REQUIREMENTS AND REFERENCE TEST METHODS
    DIN EN 14200:2004-05 Railway applications - Suspension components - Parabolic springs, steel
    EN 60335-2-45:2002/A2:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-45: PARTICULAR REQUIREMENTS FOR PORTABLE HEATING TOOLS AND SIMILAR APPLIANCES (IEC 60335-2-45:2002/A2:2011)
    EN 13190:2001 Dial thermometers
    EN 13574:2001 Inland navigation vessels - Permanently installed climbing devices with a length not exceeding 5 m
    DIN EN 246:2003-11 Sanitary tapware - General specifications for flow rate regulators
    EN 61386-24:2010 Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground
    UNE-EN 15051-2:2014 Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method
    UNE-EN 14420-8:2014 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
    EN 22768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
    ISO 2768-2:1989 GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective