• There are no items in your cart

EN 292-2 : 91 AMD 1 95

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION

Superseded date

01-11-2003

Published date

12-01-2013

Foreword
0. Introduction
1. Scope
2. Normative references
3. Risk reduction by design
3.1 Avoiding sharp edges and corners, protruding
      parts, etc.
3.2 Making machines inherently safe by virtue of...
3.3 Taking into account design codes, data about
      material properties, etc.
3.4 Using inherently safe technologies, processes,
      energy supplies
3.5 Applying the principle of the positive mechanical
      action of a component on another component
3.6 Observing ergonomic principles
3.7 Applying safety principles when designing control
      systems
3.8 Preventing hazards from pneumatic and hydraulic
      equipment
3.9 Preventing electrical hazard
3.10 Limiting exposure to hazards through reliability
      of equipment
3.11 Limiting exposure to hazards through mechanization
      and automation of loading/unloading operations
3.12 Limiting exposure to hazards through location of
      the majority of setting and maintenance points
      outside the danger zones
4. Safeguarding
4.1 Selection of guards and safety devices
4.2 Requirements for the design and construction of
      guards and safety devices
5. Information for use
5.1 General requirements
5.2 Location and nature of information for use
5.3 Signals and warning devices
5.4 Markings, signs (pictograms), written warnings
5.5 Accompanying documents
6. Additional precautions
6.1 Precautions in view of emergency situations
6.2 Equipment, systems and arrangements contributing
      to safety
Annex A (informative) Annex I of the 'Machinery
      Directive'
A.1 Annex I of the Council Directive of 14 June 1989
      on the approximation of the laws of the Member
      States relating to machinery (89/392/EEC):
      Essential health and safety requirements relating
      to the design and construction of machinery
A.2 Amendments to Annex I of the Directive 89/392/EEC
      according to Directive 91/368/EEC published on
      22 July 1991
Annex B (informative) Bibliography
Annex C (informative) Main terminological discrepancies
      between EN 292 and Machinery Directive
      (89/392/EEC)
Annex D (informative) Trilingual alphabetical index

Describes technical principles and specifications to help designers and manufacturers achieve safety in the design of machinery for professional and non-professional purposes. May be used for other technical products having similar hazards. It is recommended that this standard is incorporated in training courses or in manuals to convey technical principles and specifications to designers, etc.

Committee
CEN/TC 114
DevelopmentNote
BS AMD 8912 implements Amd 1
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
Supersedes

I.S. EN 1037:1996 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
03/302919 DC : DRAFT SEP 2003 EN 12312 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 15: BAGGAGE AND EQUIPMENT TRACTORS
95/106930 DC : DRAFT SEP 1995 BS EN 12110 TUNNELLING MACHINES - AIRLOCKS - SAFETY REQUIREMENTS
I.S. EN 1454:1998 PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
PREN 12312-16 : DRAFT 99 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT
96/542029 DC : DRAFT AUG 96 EN 1846-2 FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
I.S. EN 12639:2000 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
01/122563 DC : DRAFT JULY 2001 BS EN 14175-2 - FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS
07/30163048 DC : 0 BS EN 12882 - CONVEYOR BELTS FOR GENERAL PURPOSE USE - ELECTRICAL AND FLAMMABILITY SAFETY REQUIREMENTS
00/702570 DC : DRAFT JAN 2000 ISO/CD 3691-5 - INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - PART 5: MANUALLY PROPELLED TRUCKS
04/30106849 DC : DRAFT MAY 2004 EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
I.S. EN 12415:2000 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
03/306044 DC : DRAFT APR 2003 BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
02/711111 DC : DRAFT SEP 2002 PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
04/102158 DC : 0 BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
03/119040 DC : DRAFT NOV 2003 PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
02/561267 DC : DRAFT MAR 2002 PREN 14386 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES FOR THE OPERABILITY OF MOBILE MACHINERY
00/707535 DC : DRAFT APR 2000 PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
04/30117319 DC : 0 BS EN 60335-2-72 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR AUTOMATIC MACHINES FOR FLOOR TREATMENT FOR COMMERCIAL AND INDUSTRIAL USE
02/710681 DC : DRAFT SEP 2002 BS EN 14502-1 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 1: SUSPENDED BASKETS
03/118276 DC : DRAFT NOV 2003 BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS
I.S. EN 13128:2001 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
I.S. EN 14070:2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
PD CR 954-100:1999 Safety of machinery. Safety-related parts of control systems Guide on the use and application of EN 954-1:1996
03/313810 DC : 0 EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
95/700126 DC : DRAFT JAN 1995 PREN 1672-1 - FOOD PROCESSING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
97/720419 DC : DRAFT DEC 1997 PREN 1009-3 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: CRUSHING AND MILLING MACHINERY
95/106931 DC : DRAFT SEP 1995 BS EN 12111 TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
03/314353 DC : 0 EN 378-4 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 4: OPERATION, MAINTENANCE, REPAIR AND RECOVERY
99/708376 DC : DRAFT MAR 1999 PREN 13586 - CRANES - ACCESS
00/706811 DC : DRAFT MAR 2000 BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
02/709474 DC : DRAFT JULY 2002 BS EN 1760-3 - SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE BUMPERS, PLATES, WIRES AND SIMILAR DEVICES
DIN EN 894-1:2009-01 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
02/561276 DC : DRAFT MAR 2002 BS 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
97/707829 DC : DRAFT MAY 1997 PREN 12851 - FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
00/716569 DC : DRAFT NOV 2000 PREN 1804-3 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
97/711338 DC : DRAFT JUL 1997 PREN 12644-3 - CRANES - SAFETY - REQUIREMENTS FOR INSPECTION AND USE - PART 3: FITNESS FOR PURPOSE
99/711929 DC : DRAFT JUL 1999 EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
08/30183463 DC : DRAFT AUG 2008 BS EN 15848 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - ADJUSTABLE CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
07/30166909 DC : DRAFT AUG 2007 BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
CSA Z10535 : 2003 HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
I.S. EN 50144-1:1998 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
ISO 16156:2004 Machine-tools safety — Safety requirements for the design and construction of work holding chucks
GOST R EN 818-5 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS OF GRADE 4
S.R. CR 1030-1:1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
EN 81-80:2003 Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
DIN EN 1552:2003-09 UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
DIN EN 746-8:2001-04 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
DIN EN 12198-1:2008-11 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
DIN EN 13118:2010-01 Agricultural machinery - Potato harvesting equipment - Safety (includes Amendment A1:2009)
DIN EN 12978:2009-10 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
DIN EN 1028-2:2008-06 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
DIN EN 12195-2:2001-02 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES
DIN EN 12198-2:2008-11 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
DIN EN 792-1:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
DIN EN 792-7:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
DIN EN 792-5:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
DIN EN 12385-1:2009-01 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 13586 : 2004 CRANES - ACCESS
BS EN 12549 : 1999 ACOUSTICS - NOISE TEST CODE FOR FASTENER DRIVING TOOLS - ENGINEERING METHOD
BS EN 786 : 1996 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
BS EN 1726-1:1999 Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N General requirements
BS EN 1093-8 : 1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
BS EN 894-3 : 2000 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
BS EN 792-10 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
BS EN 13414-2 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 13128 : 2001 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
BS EN 292-1:1991 Safety of machinery. Basic concepts, general principles for design Basic terminology, methodology
BS EN 13448 : 2002 AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
BS EN 774:1996 Garden equipment. Hand held, integrally powered hedge trimmers. Safety
BS EN 792-2 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
BS EN 1151:1999 Pumps. Rotodynamic pumps. Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations. Requirements, testing, marking
BS EN 704 : 1999 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
BS EN 1834-3:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable dust atmospheres
BS EN 12195-2:2001 Load restraint assemblies on road vehicles. Safety Web lashing made from man-made fibres
BS EN 12644-1 : 2001 CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS
BS EN 954-1:1997 Safety of machinery. Safety related parts of control systems General principles for design
BS EN 12385-7:2002 Steel wire ropes. Safety Locked coil ropes for mine shafts
BS EN 792-4 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
BS EN 12198-2 : 2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
BS EN 981 : 1997 SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
BS EN 12077-2 : 1999 CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES
BS EN 1028-2 : 2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
BS EN 12635 : 2002 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE
BS EN 614-2 : 2000 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
BS EN 13411-2 : 2001 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
BS EN 1035:1999 Tannery machines. Moving platen machinery. Safety requirements
BS EN 12198-3 : 2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
BS EN 13414-3 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS
BS EN 13118 : 2000 AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
BS EN 1454:1997 Portable, hand-held, internal combustion cutting-off machines. Safety
I.S. EN 12198-2:2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
I.S. EN 13414-2:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
I.S. EN 12644-2:2000 CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 12385-10:2003+A1:2008 Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications
EN 50374:2004 Conductor cars
DIN EN 13414-2:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
DIN EN 13411-5:2009-02 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
DIN EN 14070:2009-07 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
DIN EN 13414-1:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
EN 12195-4:2003 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12469:2000 Biotechnology - Performance criteria for microbiological safety cabinets
EN 12195-3:2001 Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1037:1995+A1:2008 Safety of machinery - Prevention of unexpected start-up
CR 1030-1 : 1995 HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
CR 1100 : 1993 MEMORANDUM ON HEALTH AND SAFETY STANDARDIZATION IN SUPPORT OF 'NEW APPROACH' DIRECTIVES - APPLICATION IN THE FIELD OF MACHINERY
EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
EN 12884:1999 Biotechnology - Performance criteria for centrifuges
EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking
EN 12195-2:2000 Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings
EN 12549:1999+A1:2008 Acoustics - Noise test code for fastener driving tools - Engineering method
EN 1093-8:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method
CR 954-100:1999 Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996
DIN EN 982:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
EN 1028-2:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification of general and safety requirements
EN 12462:1998 Biotechnology - Performance criteria for pumps
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
DIN EN 791:2010-01 DRILL RIGS - SAFETY
EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service
EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
EN 12198-1:2000+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles
EN 1005-1:2001+A1:2008 Safety of machinery - Human physical performance - Part 1: Terms and definitions
DIN EN 13414-3:2009-02 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings (includes Corrigendum AC:2004 and Amendment A1:2008)
EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
EN 1010-4:2004+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
EN 12478:2000/AC:2001 SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
UNI EN 415-3 : 2010 SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
EN 13118:2000+A1:2009 Agricultural machinery - Potato harvesting equipment - Safety
EN 50144-2-2:1999 Safety of hand-held electric motor operated tools - Part 2-2: Particular requirements for screwdrivers and impact wrenches
EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings
EN 12385-1:2002+A1:2008 Steel wire ropes - Safety - Part 1: General requirements
EN 12385-9:2002 Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons
EN 13557:2003+A2:2008 Cranes - Controls and control stations
EN 13448:2001+A1:2009 Agricultural and forestry machinery - Inter-row mowing units - Safety
DIN EN 999:1998-12 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
DIN EN 13889:2009-02 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES, GRADE 6 - SAFETY
I.S. EN 1492-1:2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
I.S. EN 1088:1996 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
00/107021 DC : DRAFT OCT 2000 BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
03/109865 DC : DRAFT JULY 2003 BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES
03/316890 DC : 0 EN 1886 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - MECHANICAL PERFORMANCE
01/105373 DC : DRAFT JUL 2001 BS EN 474-1 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 12840:2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
01/105382 DC : DRAFT JULY 2001 BS EN 474-10 - EARTH-MOVING MACHINERY - SAFETY - PART 10: REQUIREMENTS FOR TRENCHERS
I.S. EN 1870-2:1999 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
DIN EN 81-28:2003-11 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 28: REMOTE ALARMS ON PASSENGER AND GOODS PASSENGER LIFTS
03/306578 DC : DRAFT APR 2003 EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
I.S. EN ISO 11806:2008 AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY
I.S. EN 792-9:2001 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
94/713480 DC : DRAFT NOV 1994 PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS
04/30115780 DC : DRAFT JUN 2004 ISO 9355-3 - SAFETY OF MACHINERY - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF SIGNALS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
02/101173 DC : DRAFT FEB 2002 BS EN 500-2 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 2: SPECIFIC REQUIREMENTS FOR ROAD MILLING MACHINES
CEI EN 50308 : 2005 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
03/306593 DC : DRAFT APR 2003 BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
04/30114100 DC : DRAFT MAY 2004 PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
07/30166915 DC : DRAFT AUG 2007 BS EN 15714-4 - INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
02/710617 DC : 0 BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
PREN 13411-4 : DRAFT 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
96/101548 DC : DRAFT MAR 1996 BS EN 12336 TUNNELLING MACHINES - SHIELD MACHINES, HORIZONTAL THRUST-BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
01/105374 DC : DRAFT JUL 2001 BS EN 474-2 EARTH-MOVING MACHINERY - SAFETY - PART 2: REQUIREMENTS FOR TRACTOR-DOZERS
03/100093 DC : DRAFT JAN 2003 BS EN 14502-2 - CRANES - EQUIPMENT FOR THE LIFTING OF PERSONS - PART 2: ELEVATING CONTROL STATIONS
99/707961 DC : DRAFT MAY 1999 PREN 12312-16 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 16: AIR START EQUIPMENT
04/102838 DC : DRAFT JAN 2004 EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
08/30177213 DC : DRAFT JUNE 2008 BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
99/707963 DC : DRAFT MAY 1999 PREN 12312-18 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 18: OXYGEN/NITROGEN UNITS
BS EN 50144-2-5:2000 Safety of hand-held electric motor operated tools Particular requirements for circular saws and circular knives
01/715188 DC : DRAFT NOV 2001 PREN 774 - GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
03/118895 DC : 0 EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
03/114108 DC : DRAFT AUG 2003 EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
03/314351 DC : 0 EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
BS EN 50144-2-2:2000 Safety of hand-held electric motor operated tools Particular requirements for screwdrivers and impact wrenches
04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
00/709413 DC : 0 BS EN ISO 15012-2 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: TESTING OF THE CAPTURE ZONE OF WELDING FUME EXTRACTION DEVICES
CSA Z10535 : 2003 : R2014 HOISTS FOR THE TRANSFER OF DISABLED PERSONS - REQUIREMENTS AND TEST METHODS
00/715016 DC : DRAFT OCT 2000 PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
GOST R EN 818-1 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 1: GENERAL REQUIREMENTS FOR ACCEPTANCE
UNI EN 81-80 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
BS EN 50144-1:1999 Safety of hand-held electric motor operated tools General requirements
I.S. EN 50144-2-13:2002 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS
DD ENV 1070:1993 Safety of machinery. Terminology
BS EN ISO 16924:2018 Natural gas fuelling stations. LNG stations for fuelling vehicles
UNI EN 707 : 2010 AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
I.S. EN 792-13:2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
NF EN 1804-2 : 2002 + A1 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
I.S. EN 12965:2003 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
NF EN 1804-3 : 2006 + A1 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 3: HYDRAULIC CONTROL SYSTEMS
DIN EN 1804-1:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements (includes Amendment A1:2010)
DIN EN 1804-2:2010-05 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams (includes Amendment A1:2010)
DIN EN 746-5:2001-04 Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment; English version of DIN EN 746-5
DIN EN 1005-3:2009-01 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
DIN EN 12321:2009-07 UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS
DIN EN 1677-4:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
DIN EN 1005-2:2009-05 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
DIN EN 1005-1:2009-04 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
DIN EN 13059:2009-06 SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
DIN EN 13128:2009-09 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
DIN EN 1010-4:2010-12 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines (includes Amendment A1:2009)
DIN EN 12965:2009-12 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
DIN EN 12957:2009-07 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 12385-10:2008-07 STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS
DIN EN 1526:2009-07 SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS
DIN EN 1677-1:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
DIN EN 1677-5:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
DIN EN 12417:2009-07 MACHINE TOOLS - SAFETY - MACHINING CENTRES
DIN EN 1492-2:2009-05 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
DIN EN 12195-4:2004-04 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
DIN EN 792-8:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
DIN EN 792-12:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
DIN EN 909:2009-12 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety (includes Amendment A1:2009)
DIN EN 693:2011-11 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
BS EN 792-8 : 2001 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
BS EN 1870-2:1999 Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
BS EN 1757-1:2001 Safety of industrial trucks. Pedestrian propelled trucks Stacker trucks
DIN EN 894-3:2010-01 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008)
BS EN 12884:1999 Biotechnology. Performance criteria for centrifuges
BS EN 12885:1999 Biotechnology. Performance criteria for cell disrupters
BS EN 13414-1 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
BS EN 792-12 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
BS EN 792-6 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
BS EN 1492-2 : 2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES, FOR GENERAL PURPOSE USE
BS EN 81-80:2003 Safety rules for the construction and installation of lifts. Existing lifts Rules for the improvement of safety of existing passenger and goods passenger lifts
BS EN 1526 : 1998 SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS
BS EN 1093-6 : 1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET
BS EN 12321 : 2003 UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS
I.S. EN 1005-1:2002 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
I.S. EN 1005-3:2002 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
I.S. EN 13414-1:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
I.S. EN 12717:2001 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
I.S. EN 13414-3:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS
I.S. EN 1093-6:1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET
I.S. EN 12385-1:2002 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 13448:2002 AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
I.S. EN 1526:1998 SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS
I.S. EN 12198-1:2000 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
I.S. EN 1010-4:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
I.S. EN 1070:1999 SAFETY OF MACHINERY - TERMINOLOGY
I.S. EN 12198-3:2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
UNI EN 1804-2 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
I.S. EN 12644-1:2001 CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS
DIN EN 792-3:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN 709:1997 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
I.S. EN 13118:2001 AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
I.S. EN 13140:2001 AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
I.S. EN 1028-1:2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN 792-2:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN EN 792-6:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
I.S. EN 786:1996 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
DIN EN 792-4:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
I.S. EN 894-2:1997 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
I.S. EN 842:1997 SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
I.S. EN 1525:1998 SAFETY OF INDUSTRIAL TRUCKS - DRIVERLESS TRUCKS AND THEIR SYSTEMS
I.S. EN 415-3:2000 SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
DIN EN 12385-7:2003-02 STEEL WIRE ROPES - SAFETY - PART 7: LOCKED COIL ROPES FOR MINE SHAFTS
EN 1804-2:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams
DIN EN 792-1:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
I.S. EN 13889:2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
DIN EN 792-7:2002-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
EN 13586:2004+A1:2008 Cranes - Access
I.S. EN 609-2:2000 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
I.S. EN 1677-2:2000 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
I.S. EN 13411-1:2002 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS
DIN EN 792-4:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
DIN EN 12639:2000-06 LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND 3 OF ACCURACY
I.S. EN 1677-5:2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
I.S. EN 1028-2:2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
I.S. EN 818-7:2002 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
DIN EN 792-3:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
I.S. EN 1492-2:2000 TEXTILE SLINGS - SAFETY - PART 2: ROUNDSLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
I.S. EN 1804-1:2002 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
DIN EN 792-5:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
DIN EN 792-6:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
I.S. EN 12549:1999 ACOUSTICS - NOISE TEST CODE FOR FASTENER DRIVING TOOLS - ENGINEERING METHOD
I.S. EN 909:1999 AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
DIN EN 81-70:2005-09 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGERS LIFTS - PART 70: ACCESSIBILITY TO LIFTS FOR PERSONS INCLUDING PERSONS WITH DISABILITY
DIN EN 1050:1997-01 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
I.S. EN 1804-2:2002 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
I.S. EN 1677-3:2001 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
DIN EN 12385-9:2003-03 STEEL WIRE ROPES - SAFETY - PART 9: LOCKED COIL CARRYING ROPES FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS
EN 1804-1:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements
I.S. EN 1677-6:2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
I.S. EN 706:1997 AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
I.S. EN 13586:2004 CRANES - ACCESS
I.S. EN 1677-4:2001 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
I.S. EN 12978:2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
I.S. EN 1093-8:1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
I.S. EN 13985:2003 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
I.S. EN 13059:2002 SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
I.S. EN 12385-10:2004 STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS
I.S. EN 614-2:2000 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
I.S. EN 13411-2:2001 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
I.S. EN 908:1999 AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
I.S. EN 894-1:1997 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
DIN EN 14175-2:2003-08 FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS
DIN EN 13478:2008-12 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
DIN EN 12385-8:2003-03 STEEL WIRE ROPES - SAFETY - PART 8: STRANDED HAULING AND CARRYING-HAULING ROPES FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS
I.S. EN 1093-7:1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET
DIN EN 1088:1996-02 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
DIN EN 792-9:2001-08 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN 13788:2002-04 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
DIN EN 792-8:2001-08 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNI EN 1804-1 : 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
I.S. EN ISO 15744:2008 HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
I.S. EN ISO 14314:2009 RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS
I.S. EN 574:1997 SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
I.S. EN 1677-1:2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
I.S. EN 12321:2003 UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS
I.S. EN 13557:2003 CRANES - CONTROLS AND CONTROL STATIONS
I.S. EN 13411-5:2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
DIN EN 12957:2001-12 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
DIN EN 1757-4:2003-11 SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS
I.S. EN 1093-4:1996 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD
I.S. EN 1889-2:2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines
I.S. EN 12635:2002 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE
I.S. EN 894-3:2000 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
I.S. EN 1093-9:1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
UNI EN 792-7 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
UNI EN 1677-6 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
UNI EN 626-1 : 2008 SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
UNI EN 792-11 : 2009 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
UNI EN 764-7 : 2004 PRESSURE EQUIPMENT - SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
UNI EN ISO 15744 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
VDI 4421:2000-10 Driving systems for piece goods conveying - Survey and selection
01/105379 DC : DRAFT JULY 2001 BS EN 474-7 - EARTH-MOVING MACHINERY - SAFETY - PART 7: REQUIREMENTS FOR SCRAPERS
UNI EN 13586 : 2008 CRANES - ACCESS
DIN EN 707:2015-11 (Draft) AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
01/711762 DC : DRAFT SEP 2001 BS EN 14238 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
99/707964 DC : DRAFT MAY 1999 PREN 12312-19 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 19: AIRCRAFT JACKS AND HYDRAULIC TAIL STANCHIONS
GOST R EN 818-3 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 4 CHAIN SLINGS
BS EN 45510-6-8:2000 Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes
I.S. EN 1552:2003 UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
03/314350 DC : 0 EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
BS EN 50308:2004 Wind turbines. Protective measures. Requirements for design, operation and maintenance
I.S. EN 1726-1:1999 SAFETY OF INDUSTRIAL TRUCKS - SELF-PROPELLED TRUCKS UP TO AND INCLUDING 10,000 KG CAPACITY AND INDUSTRIAL TRACTORS WITH A DRAWBAR PULL UP TO AND INCLUDING 20,000 N - GENERAL REQUIREMENTS
I.S. EN 13788:2002 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
13/30271407 DC : DRAFT DEC 2013 BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
00/541673 DC : DRAFT NOV 2000 BS EN 14044 - SEMI-AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
I.S. EN 1050:1997 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
01/105378 DC : DRAFT JULY 2001 EARTH-MOVING MACHINERY - SAFETY - PART 6: REQUIREMENTS FOR DUMPERS
01/105376 DC : DRAFT JUL 2001 BS EN 474-4 EARTH-MOVING MACHINERY - SAFETY - PART 4: REQUIREMENTS FOR BACKHOE LOADERS
I.S. EN 115:1995 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS
02/101176 DC : DRAFT FEB 2002 BS EN 500-6 - MOBILE ROAD CONSTRUCTION MACHINERY - SAFETY - PART 6: SPECIFIC REQUIREMENTS FOR PAVER-FINISHERS
DIN EN 894-2:2009-02 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
96/104565 DC : JUN 96 EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS
04/30110326 DC : DRAFT APR 2004 EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
01/105381 DC : DRAFT JULY 2001 EARTH-MOVING MACHINERY - SAFETY - PART 9: REQUIREMENTS FOR PIPELAYERS
04/30098132 DC : DRAFT JUL 2004 EN 14969 - RAILWAY APPLICATIONS - TRACK - QUALIFICATION OF RAILWAY TRACKWORKS CONTRACTORS
04/30110543 DC : 0 EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
01/105383 DC : DRAFT JULY 2001 BS EN 474-11 - EARTH-MOVING MACHINERY - SAFETY - PART 11: REQUIREMENTS FOR EARTH AND LANDFILL COMPACTORS
08/30176106 DC : DRAFT MAR 2008 BS EN 1865-2 - SPECIFICATION FOR PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES - PART 2: POWER ASSISTED STRETCHERS
03/115173 DC : 0 BS EN 13035-1 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
02/710588 DC : DRAFT AUG 2002 BS EN 14439 - CRANES - TOWER CRANES
00/562569 DC : DRAFT JUN 2000 BS EN 13921-1 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 1: GENERAL REQUIREMENTS FOR THE DESIGN AND THE SPECIFICATION
97/720418 DC : DRAFT DEC 1997 EN 1009-2 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: FEEDING MACHINERY
96/104566 DC : DRAFT JUN 1996 PREN 12437-4 - SAFETY OF MACHINERY - PERFORMANCE MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 4: FIXED LADDERS
03/111188 DC : DRAFT AUG 2003 BS EN 1010-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
97/719442 DC : DRAFT NOV 1997 PREN 13035-7 - MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 7: CUTTING MACHINES FOR LAMINATED GLASS
04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
BS EN 50144-2-4:2000 Safety of hand-held electric motor operated tools Particular requirements for sanders
97/708413 DC : DRAFT APR 1997 PREN 12312-7 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIRCRAFT MOVEMENT EQUIPMENT
BS EN 50260-1:2002 Safety of hand-held battery-powered motor-operated tools and battery packs General requirements
00/709412 DC : DRAFT MAY 2000 BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 1: TESTING OF THE SEPARATION EFFICIENCY FOR WELDING FUME
UNI EN 1010-4 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
DIN EN 842:2009-01 SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
I.S. EN 50374:2004 CONDUCTOR CARS
PREN 14175-2 : DRAFT 2001 FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS
I.S. EN 50308:2005 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
I.S. EN 707:1999 AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
BS EN 707 : 1999 AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
UNI EN 12733 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
DIN EN 81-70:2015-11 (Draft) SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATIONS OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOODS PASSENGERS LIFTS - PART 70: ACCESSIBILITY TO LIFTS FOR PERSONS INCLUDING PERSONS WITH DISABILITY
DIN EN 1088:2008-10 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
DIN EN 13140:2010-09 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety (includes Amendment A1:2009)
NF EN 81-70 : 2003 AMD 1 2005 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS FOR PASSENGER AND GOOD PASSENGER LIFTS - PART 70: ACCESSIBILITY TO LIFTS FOR PERSONS INCLUDING PERSONS WITH DISABILITY
DIN EN 1677-2:2008-06 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
DIN EN 1492-1:2009-05 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
DIN EN 12549:2008-12 ACOUSTICS - NOISE TEST CODE FOR FASTENER DRIVING TOOLS - ENGINEERING METHOD
DIN EN 746-4:2000-05 Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; English version of DIN EN 746-4
DIN EN 1677-6:2009-03 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
DIN EN 1677-3:2008-06 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS, GRADE 8
DIN EN 12717:2009-07 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
DIN EN 786:2012-01 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
DIN EN 1093-8:2008-11 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER - TEST BENCH METHOD
DIN EN 1093-6:2008-11 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET
DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
DIN EN 792-11:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
DIN EN 13736:2009-11 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
DIN EN 349:2008-09 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
DIN EN 745:2010-01 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
DIN EN 12644-1:2009-06 CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS
DIN EN ISO 14314:2010-01 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
DIN EN 13985:2009-11 Machine tools - Safety - Guillotine shears (includes Amendment A1:2009)
DIN EN 1093-7:2008-11 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET
BS EN 12195-3:2001 Load restraint assemblies on road vehicles. Safety Lashing chains
BS EN 999 : 1999 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
BS EN 746-8:2000 Industrial thermoprocessing equipment Particular safety requirements for quenching equipment
BS EN ISO 14314:2009 Reciprocal internal combustion engines. Recoil starting equipment. General safety requirements
BS EN 1677-3 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
BS EN 909 : 1999 AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
BS EN 13889 : 2003 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6 - SAFETY
BS EN 115:1995 Safety rules for the construction and installation of escalators and passenger conveyors.
BS EN 12478:2001 Safety of machine tools. Large numerically controlled turning machines and turning centres
BS EN 574 : 1997 SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
BS EN 13898 : 2003 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
ISO 11806:1997 Agricultural and forestry machinery Portable hand-held combustion engine driven brush cutters and grass trimmers Safety
BS EN 418:1992 Safety of machinery. Emergency stop equipment, functional aspects. Principles for design
BS EN 709 : 1997 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
BS EN 706 : 1997 AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
BS EN 608:1995 Agricultural and forestry machinery. Portable chain saws. Safety
BS EN 792-5 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
BS EN 894-2 : 1997 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
BS EN 12325-2:1999 Irrigation techniques. Centre pivot and moving lateral systems Minimum performances and technical characteristics
BS EN 13411-1 : 2002 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS
BS EN 414:2000 Safety of machinery. Rules for the drafting and presentation of safety standards
I.S. EN 1005-2:2003 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
UNE-EN 792-13:2001 HAND-HELD NON-ELECTRIC POWER TOOLS. SAFETY REQUIREMENTS. PART 13: FASTENER DRIVING TOOLS.
EN 707:1999+A1:2009 Agricultural machinery - Slurry tankers - Safety
UNE-EN 693:2001 Machine tools - Safety - Hydraulic presses
UNE-EN 709:1997 AGRICULTURAL AND FORESTRY MACHINERY. PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S). SAFETY.
I.S. EN 349:1993 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears
EN 746-4 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT
EN 909:1998+A1:2009 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety
EN 792-6:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners
EN 982:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics
EN 792-13:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools
UNI EN 13557 : 2008 CRANES - CONTROLS AND CONTROL STATIONS
UNI EN 792-3 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
UNI EN 792-12 : 2009 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
UNI EN 1093-9 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
UNI EN 13059 : 2008 SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
UNI EN 609-2 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
UNI EN 1677-1 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
EN 50144-2-4:1999 Safety of hand-held electric motor operated tools - Part 2-4: Particular requirements for sanders
UNI EN 709 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
UNI EN 786 : 2010 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
UNI EN 13118 : 2010 AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
UNI EN 13414-3 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 3: GROMMETS AND CABLE-LAID SLINGS
UNI EN 12198-2 : 2009 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
UNI EN 1492-2 : 2009 TEXTILE SLINGS - SAFETY - PART 2: ROUND SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
EN 708:1996/A1:2000 AGRICULTURAL MACHINERY - SOIL WORKING MACHINES WITH POWERED TOOLS - SAFETY
UNI EN 13736 : 2009 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
UNI EN ISO 11806 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY
UNI EN 13414-2 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 981 : 2009 SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
UNI EN 1677-4 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
UNI EN 1093-6 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET
UNI EN 1677-3 : 2008 COMPONENTS FOR SLINGS - SAFETY - PART 3: FORGED STEEL SELF-LOCKING HOOKS - GRADE 8
UNI EN 745 : 2010 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
UNI EN 792-2 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
UNI EN 791 : 2009 DRILL RIGS - SAFETY
UNI EN 13411-2 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
UNI EN 894-2 : 2009 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
UNI EN 1028-1 : 2008 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
UNI EN 13411-5 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
UNI EN 815 : 2009 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
UNI EN 574 : 2008 SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
UNI EN 1028-2 : 2008 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
UNI EN 13889 : 2009 FORGED STEEL SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADE 6: SAFETY
UNI EN 614-2 : 2009 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
UNI EN 12417 : 2009 MACHINE TOOLS - SAFETY - MACHINING CENTRES
UNI EN 792-4 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 4: NON-ROTARY PERCUSSIVE POWER TOOLS
UNI EN 792-10 : 2009 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
UNI EN 792-5 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 5: ROTARY PERCUSSIVE DRILLS
UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
UNI EN 13414-1 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
UNI EN 792-13 : 2009 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
UNI EN 12978 : 2009 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
UNI EN 996 : 2009 PILING EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 842 : 2009 SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
UNI EN ISO 9902-1 : 2014 TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS
UNI EN 13478 : 2008 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
UNI EN 908 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
UNI EN 1526 : 2008 SAFETY OF INDUSTRIAL TRUCKS - ADDITIONAL REQUIREMENTS FOR AUTOMATED FUNCTIONS ON TRUCKS
UNI EN 983 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
UNI EN 818-7 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
UNI EN 1088 : 2008 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
UNI EN 13898 : 2009 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
UNI EN 13140 : 2010 AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
UNI EN 982 : 2009 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
UNI EN 792-8 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 8: SANDERS AND POLISHERS
UNI EN 12644-2 : 2008 CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING
UNI EN 12077-2 : 2008 CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES
UNI EN 12321 : 2009 UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS
UNI EN 12549 : 2009 ACOUSTICS - NOISE TEST CODE FOR FASTENER DRIVING TOOLS - ENGINEERING METHOD
UNI EN 894-3 : 2009 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
UNI EN 792-6 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 6: ASSEMBLY POWER TOOLS FOR THREADED FASTENERS
UNI EN 894-1 : 2009 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
UNI EN 1492-1 : 2009 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USES
UNI EN 1889-2 : 2009 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
UNI EN 1093-8 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD
UNI EN 704 : 2010 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
UNI EN 1093-7 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET
UNI EN 999 : 2008 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
UNI EN 12198-1 : 2009 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
UNI EN 792-9 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
UNI EN 1093-4 : 2008 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD
UNI EN 13411-1 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS
UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
UNI EN 693 : 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
UNI EN 1005-3 : 2009 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
UNI EN 12635 : 2009 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE
UNI EN 12957 : 2009 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
UNI EN 1005-1 : 2009 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
UNI EN 13985 : 2009 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
UNI EN 12385-1 : 2009 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN 13128 : 2009 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
UNI EN 12644-1 : 2008 CRANES - INFORMATION FOR USE AND TESTING - PART 1: INSTRUCTIONS
UNI EN 1677-5 : 2009 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
UNI EN 12717 : 2009 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
UNI EN ISO 14314 : 2010 RECIPROCAL INTERNAL COMBUSTION ENGINES - RECOIL STARTING EQUIPMENT - GENERAL SAFETY REQUIREMENTS
UNI EN 792-1 : 2008 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
UNI EN 13448 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
UNI EN 909 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
UNI EN 12198-3 : 2008 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
UNI EN 349 : 2008 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
UNI EN 1037 : 2008 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
UNI EN 1005-2 : 2009 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
UNI EN 1677-2 : 2008 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
UNI EN 12385-10 : 2008 STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS
UNI EN 706 : 2010 AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
01/712575 DC : DRAFT SEP 2001 ISO 13849-2 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEM - PART 2: VALIDATION
00/715165 DC : DRAFT OCT 2000 BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
05/30076951 DC : 0 BS EN 12605 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - TEST METHODS
07/30166912 DC : DRAFT AUG 2007 BS EN 15714-3 - INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
CEI EN 50374 : 2005 CONDUCTOR CARS
I.S. EN 12077-2:1999 CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES
02/706849 DC : DRAFT MAY 2002 BS EN 1915-4 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS
05/30076959 DC : DRAFT APR 2005 BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS
05/30076926 DC : DRAFT APR 2005 EN 12604 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS
00/707658 DC : DRAFT APR 2000 PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
97/718229 DC : DRAFT NOV 1997 PREN 13064 - CERAMIC MACHINES - SAFETY - SETTING AND DEHACKING OF HEAVY CLAY AND REFRACTORY PRODUCTS
97/713936 DC : DRAFT AUG 1997 PREN 13000 - CRANES - SAFETY - MOBILE CRANES
I.S. EN 12478:2000 SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
09/30198357 DC : 0 BS EN 13411-4 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING
99/706406 DC : DRAFT APR 1999 PREN 13445-6 - UNFIRED PRESSURE VESSELS - PART 6: SAFETY SYSTEMS
BS ISO 17894:2005 Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications
01/105375 DC : DRAFT JUL 2001 BS EN 474-3 EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
CEI UNI EN 45510-6-8 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES
00/708470 DC : DRAFT APR 2000 PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE
03/307974 DC : DRAFT MAY 2003 ISO 24134 - INDUSTRIAL TRUCKS - ADD REQS FOR AUTOMATED FUNCTIONS ON TRUCKS
95/710329 DC : DRAFT JUL 1995 PREN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
01/105377 DC : DRAFT JULY 2001 BS EN 474-5 - EARTH-MOVING MACHINERY - SAFETY - PART 5: REQUIREMENTS FOR HYDRAULIC EXCAVATORSE
00/541672 DC : DRAFT NOV 2000 BS EN 14043 - AUTOMATIC TURNTABLE LADDERS FOR FIRE SERVICE USE - REQUIREMENTS AND TEST METHODS
95/710328 DC : 0 PREN 12044 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURE MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
PREN 1672-2 : DRAFT 2003 FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
98/718745 DC : DRAFT DEC 1998 PREN 13414-1 - STEEL WIRE ROPE SLINGS - SAFETY - PART 1: WIRE ROPE SLINGS
BS EN 12733 : 2001 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
98/718705 DC : DRAFT DEC 1998 PREN 13411-6 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET CLEVIS
02/714362 DC : DRAFT DEC 2002 EN 12312-20 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: GROUND POWER EQUIPMENT
04/19987464 DC : 0 BS EN 15027 - TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
00/707575 DC : DRAFT APR 2000 ISO/DIS 12100-1 - SAFETY OF MACHINERY - BASIC CONCEPTS AND GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY AND METHODOLOGY
96/107552 DC : DRAFT OCT 1996 BS EN 12609 - TRUCKMIXERS - SAFETY REQUIREMENTS
97/720420 DC : DRAFT DEC 1997 EN 1009-4 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SIZING AND SORTING MACHINERY
95/700501 DC : DRAFT JAN 1995 PREN 1756-1 SPECIFICATION FOR TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
DIN EN 1037:2008-11 SAFETY OF MACHINERY - PREVENTATION OF UNEXPECTED START-UP
00/705761 DC : DRAFT FEB 2000 PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
I.S. EN ISO 16924:2018 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016)
I.S. CR 1100:1993 MEMORANDUM ON HEALTH AND SAFETY STANDARDIZATION IN SUPPORT OF "NEW APPROACH" DIRECTIVES - APPLICATION IN THE FIELD OF MACHINERY
ISO 15531-44:2017 Industrial automation systems and integration — Industrial manufacturing management data — Part 44: Information modelling for shop floor data acquisition
S.R. CWA 15902-2:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 2: SPECIFICATIONS FOR DESIGN, MANUFACTURE AND FOR USE OF ALUMINIUM AND STEEL TRUSSES AND TOWERS
DIN EN 81-80:2004-02 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
GOST EN 1760-1 : 2004 SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1 - GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
EN 13748 : *DUPLICATE RECORD* **DUPLICATE RECORD**
PREN 13852 : DRAFT 2000 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
BS EN 12965 : 2003 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
I.S. EN 12733:2001 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
I.S. EN 81-80:2004 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
UNI EN 12965 : 2010 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
EN 12077-2 : 1998 CRANES SAFETY - REQUIREMENTS FOR HEALTH AND SAFETY - PART 2: LIMITING AND INDICATING DEVICES
NF EN 1804-1 : 2002 + A1 2010 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
DIN EN 12635:2015-07 (Draft) INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - INSTALLATION AND USE
DIN EN 764-7:2002-09 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
DIN EN 13586:2009-05 Cranes - Access (includes Amendment A1:2008)
DIN EN 981:2009-01 SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
DIN EN 908:2009-12 Agricultural and forestry machinery - Reel machines for irrigation - Safety (includes Amendment A1:2009)
DIN EN 415-3:2010-07 Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009)
DIN EN ISO 15744:2008-11 HAND-HELD NON-ELECTRIC POWER TOOLS - NOISE MEASUREMENT CODE - ENGINEERING METHOD (GRADE 2)
DIN EN 792-13:2009-01 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
DIN EN 1093-9:2008-11 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
DIN EN 818-7:2008-07 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
DIN EN 1093-4:2008-09 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD
DIN EN 12077-2:2008-12 Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices (includes Amendment A1:2008)
DIN EN 12644-2:2009-06 CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING
DIN EN 706:2009-12 Agricultural machinery - Vine shoot tipping machines - Safety (includes Amendment A1:2009)
BS EN 764-7:2002 Pressure equipment Safety systems for unfired pressure vessels
BS EN 12198-1 : 2000 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
BS EN ISO 15744:2002 Hand-held non-electric power tools. Noise measurement code. Engineering method (grade 2)
BS EN 792-11 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
BS EN 12639:2000 Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
BS EN 1028-1 : 2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
BS EN 415-4:1998 Safety of packaging machines Palletizers and depalletizers
BS EN 908 : 1999 AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
BS EN 1093-4 : 1996 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 4: CAPTURE EFFICIENCY OF AN EXHAUST SYSTEM - TRACER METHOD
BS EN 13411-5 : 2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
BS EN 1005-1 : 2001 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
BS EN 12840:2001 Safety of machine tools. Manually controlled turning machines with or without automatic control
BS EN 1525:1998 Safety of industrial trucks. Driverless trucks and their systems
BS EN 12417 : 2001 MACHINE TOOLS - SAFETY - MACHINING CENTRES
BS EN 815 : 1997 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
BS EN 12462:1998 Biotechnology. Performance criteria for pumps
BS EN 1889-2 : 2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
98/705686 DC : DRAFT MAR 1998 PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
BS EN 1005-2 : 2003 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
BS EN 1677-1 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 1: FORGED STEEL COMPONENTS, GRADE 8
BS EN 1834-1:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres
BS EN 13736 : 2003 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
BS EN 1010-4 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
BS EN 842 : 1996 SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
BS EN 982 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - HYDRAULICS
BS EN 14175-2:2003 Fume cupboards Safety and performance requirements
BS EN 1553:2000 Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
BS EN 818-7 : 2002 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
BS EN 894-1 : 1997 SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
BS EN 1757-2:2001 Safety of industrial trucks. Pedestrian propelled trucks Pallet trucks
BS EN 415-3 : 2000 SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
BS EN 1726-2:2000 Safety of industrial trucks. Self-propelled trucks up to and including 10000 kg capacity and industrial tractors with a drawbar pull up to and including 20000 N Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
BS EN 12385-8:2002 Steel wire ropes. Safety Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
BS EN 349 : 1993 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
BS EN 13478 : 2002 SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION
BS EN 13140 : 2000 AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
BS EN 1746:1999 Safety of machinery. Guidance for the drafting of the noise clauses of safety standards
BS EN 996 : 1996 PILING EQUIPMENT - SAFETY REQUIREMENTS
BS EN 12717 : 2001 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
BS EN 12978 : 2003 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY DEVICES FOR POWER OPERATED DOORS AND GATES - REQUIREMENTS AND TEST METHODS
BS EN 13985 : 2003 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
BS EN 746-4:2000 Industrial thermoprocessing equipment Particular safety requirements for hot dip galvanizing thermoprocessing equipment
BS EN 12644-2 : 2000 CRANES - INFORMATION FOR USE AND TESTING - PART 2: MARKING
ISO 14314:2004 Reciprocal internal combustion engines Recoil starting equipment General safety requirements
BS EN 1757-4:2003 Safety of industrial trucks. Pedestrian propelled trucks Scissor lift pallet-trucks
BS EN 693 : 2001 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
ISO 15744:2002 Hand-held non-electric power tools Noise measurement code Engineering method (grade 2)
BS EN 1865:2000 Specifications for stretchers and other patient handling equipment used in road ambulances
BS EN 983 : 1996 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
BS EN 1677-5 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 5: FORGED STEEL LIFTING HOOKS WITH LATCH - GRADE 4
BS EN 792-13 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS
BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
BS EN 12415:2001 Safety of machine tools. Small numerically controlled turning machines and turning centres
BS EN 1551:2000 Safety of industrial trucks. Self propelled trucks over 10 000 kg capacity
BS EN 12957 : 2001 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
BS EN 13788:2002 Machine tools. Safety. Multi-spindle automatic turning machines
BS EN 1677-4 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 4: LINKS, GRADE 8
BS EN 1037 : 1996 SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
BS EN 1093-7 : 1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET
UNE-EN ISO 14314:2010 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
BS EN 13862 : 2001 FLOOR CUTTING-OFF MACHINES - SAFETY
BS EN ISO 11111:1996 Safety requirements for textile machinery
BS EN 1834-2:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
BS EN 12385-9:2002 Steel wire ropes. Safety Locked coil carrying ropes for cableway installations designed to carry persons
BS EN 1093-9 : 1999 SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD
BS EN 12469:2000 Biotechnology. Performance criteria for microbiological safety cabinets
UNE-EN 13140:2001 AGRICULTURAL MACHINERY. SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT. SAFETY.
BS EN 626-1 : 1995 SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
BS EN 13059 : 2002 SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING VIBRATION
BS EN ISO 11806:2008 Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety
BS EN 1088 : 1995 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
BS EN 12195-4:2003 Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes
BS EN 791 : 1996 DRILL RIGS - SAFETY
BS EN 1804-1 : 2001 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 1: SUPPORT UNITS AND GENERAL REQUIREMENTS
DIN EN 999:2008-10 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEED OF PARTS OF THE HUMAN BODY
DIN EN 792-11:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 11: NIBBLERS AND SHEARS
EN ISO 11806:2008 Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
EN 908:1999+A1:2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety
EN 706:1996+A1:2009 Agricultural machinery - Vine shoot tipping machines - Safety
EN 13140:2000+A1:2009 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety
EN 792-5:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills
EN 13788 : 2001 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
EN 609-2:1999+A1:2009 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters
EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN 792-7:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 7: Grinders
EN 1677-5:2001+A1:2008 Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4
EN 907 : 1997 AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - SAFETY
EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
EN 1757-4 : 2003 SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 4: SCISSOR LIFT PALLET-TRUCKS
EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
EN 1551:2000 Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity
EN ISO 15744:2008 Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002)
EN 1677-6:2001+A1:2008 Components for slings - Safety - Part 6: Links - Grade 4
EN 792-10:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools
EN 14175-2:2003 Fume cupboards - Part 2: Safety and performance requirements
EN 746-8 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT
EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety
EN 996:1995+A3:2009 Piling equipment - Safety requirements
EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN 1865 : 1999 SPECIFICATIONS FOR STRETCHERS AND OTHER PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES
EN 1526:1997+A1:2008 Safety of industrial trucks - Additional requirements for automated functions on trucks
EN 414 : 2000 SAFETY OF MACHINERY - RULES FOR THE DRAFTING AND PRESENTATION OF SAFETY STANDARDS
EN 1525:1997 Safety of industrial trucks - Driverless trucks and their systems
EN 1726-2:2000 Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
EN 792-8:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers
EN 1870-2:1999/AC:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
EN 632 : 1995 AGRICULTURAL MACHINERY - COMBINE HARVESTERS AND FORAGE HARVESTERS - SAFETY
EN 1552 : 2003 UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
EN 774:1996/A3:2001 GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
EN 818-7:2002+A1:2008 Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN ISO 14314:2009 Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
EN 792-4:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools
EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN 608 : 1994 AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE CHAIN SAWS - SAFETY
EN 792-11:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears
EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 983:1996+A1:2008 Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics
EN 1757-1 : 2001 SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS
EN 792-1:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners
EN 12978:2003+A1:2009 Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods
EN 746-5 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 5: PARTICULAR SAFETY REQUIREMENTS FOR SALT BATH THERMOPROCESSING EQUIPMENT
EN 1677-4:2000+A1:2008 Components for slings - Safety - Part 4: Links, Grade 8
EN 693 : 2001 COR 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
EN 815:1996+A2:2008 Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements
EN 1834-3:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 3: Group II engines for use in flammable dust atmospheres
EN 792-9:2001+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders
EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
EN 704:1999+A1:2009 Agricultural machinery - Pick-up balers - Safety
EN 1553 : 1999 AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS
EN 1757-2 : 2001 SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS
EN 745:1999+A1:2009 Agricultural machinery - Rotary mowers and flail-mowers - Safety
EN 792-2:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools
EN 1677-3:2001+A1:2008 Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8
EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
EN 792-3:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers
EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
EN 1746:1998 Safety of machinery - Guidance for the drafting of the noise clauses of safety standards
EN 792-12:2000+A1:2008 Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws
EN 13059:2002+A1:2008 Safety of industrial trucks - Test methods for measuring vibration
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
EN 786:1996+A2:2009 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
EN 791:1995+A1:2009 Drill rigs - Safety
EN 563:1994/A1:1999/AC:2000 SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
EN 1677-1:2000+A1:2008 Components for slings - Safety - Part 1: Forged steel components, Grade 8
EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 1454 : 1997 PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
EN 1677-2:2000+A1:2008 Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
NF EN 50308 : 2004 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
I.S. EN 981:1996 Safety of machinery - System of auditory and visual danger and information signals
DIN EN 12733:2016-08 (Draft) AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
PREN 12693 : DRAFT 1996 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS
I.S. EN 563:1994 SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES
02/540559 DC : DRAFT JULY 2002 EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
I.S. EN 774:1996 GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
I.S. EN 792-7:2002 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
03/112610 DC : DRAFT AUG 2003 EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY
98/265367 DC : DRAFT DEC 1998 BS EN 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURE IN RELATION TO MACHINERY
04/30111716 DC : DRAFT MAR 2004 EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
03/112612 DC : DRAFT AUG 2003 EN 14710-2 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 2: VERIFICATION OF GENERAL AND SAFETY REQUIREMENTS
03/116398 DC : DRAFT OCT 2003 BS EN 13411-7 - TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET
03/306594 DC : DRAFT APR 2003 BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
03/306308 DC : DRAFT JUNE 2003 EN 1005-5 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 5: RISK ASSESSMENT FOR REPETITIVE HANDLING AT HIGH FREQUENCY
03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
03/306595 DC : 0 BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
01/105380 DC : DRAFT JULY 2001 BS EN 474-8 - EARTH-MOVING MACHINERY - SAFETY - PART 8: REQUIREMENTS FOR GRADERS
98/717506 DC : DRAFT DEC 1998 PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
BS EN 50144-2-13:2002 Safety of hand-held electric motor operated tools Particular requirements for chain saws
I.S. EN 12417:2001 MACHINE TOOLS - SAFETY - MACHINING CENTRES
03/317581 DC : DRAFT OCT 2003 EN 1151-1 - PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING AN ELECTRICAL EFFECT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 1: NON-AUTOMATIC CIRCULATION PUMPS, REQUIREMENTS, TESTING, MARKING
98/700933 DC : DRAFT JAN 1998 PREN 13102 - CERAMIC MACHINES - SAFETY - SETTING AND DEHACKING OF FINE CLAY TILES
97/700976 DC : DRAFT JAN 1997 PREN 12692 - CERAMIC MACHINES - SAFETY - PRESSES
02/706761 DC : DRAFT MAY 2002 PREN 14461 - INDUSTRIAL FANS - SAFETY REQUIREMENTS
00/706812 DC : DRAFT MAR 2000 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
00/717064 DC : DRAFT NOV 2000 PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES
98/110481 DC : DRAFT 1998 PREN 474-12 - EARTH MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
93/703129 DC : 0 FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY REQUIREMENTS
BS EN 50374:2004 Conductor cars
03/104284 DC : DRAFT FEB 2003 EN 1672-2 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS
97/700630 DC : DRAFT JAN 1997 PREN 12693 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS
96/108461 DC : 0 PREN 12649 - CONCRETE COMPACTORS AND FLOATING MACHINES - SAFETY REQUIREMENTS
PREN 1005-4 : DRAFT 1998 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES IN RELATION TO MACHINERY
02/711304 DC : DRAFT SEP 2002 BS EN 415-5 - PACKAGING MACHINES SAFETY - PART 5: WRAPPING MACHINES
BS ISO 16156:2004 Machine-tools safety. Safety requirements for the design and construction of work holding chucks
02/705139 DC : DRAFT APR 2002 PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
DIN EN 1853:2015-11 (Draft) AGRICULTURAL MACHINERY - TRAILERS WITH TIPPING BODY - SAFETY
ISO 14121:1999 Safety of machinery Principles of risk assessment
EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016)
GOST R EN 818-2 : 2005 SHORT LINK STEEL CHAINS FOR LIFTING PURPOSES - SAFETY - PART 2: MEDIUM TOLERANCE STEEL CHAINS FOR GRADE 8 CHAIN SLINGS
GOST R EN 818-4 : 2005 SHORT LINK CHAINS FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS GRADE 8
ISO 17894:2005 Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications
EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
I.S. EN 50260-1:2002 SAFETY OF HAND-HELD BATTER-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 1: GENERAL REQUIREMENTS
S.R. CR 954-100:1999 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 100: GUIDE ON THE USE AND APPLICATION OF EN 954-1:1996
DIN EN 792-2:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 2: CUTTING-OFF AND CRIMPING POWER TOOLS
DIN EN 13448:2010-02 Agricultural and forestry machinery - Inter-row mowing units - Safety (includes Amendment A1:2009)
DIN EN 1028-1:2008-09 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
DIN EN 614-2:2008-12 SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
DIN EN 12198-3:2008-11 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
DIN EN 609-2:2010-07 Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters (includes Amendment A1:2009)
DIN EN 792-9:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
DIN EN 13557:2009-07 Cranes - Controls and control stations; German version EN 13557:2003+A2:2008
DIN EN 792-10:2009-12 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
DIN EN 709:2011-06 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A4:2009)
BS EN 12385-10 : 2003 STEEL WIRE ROPES - SAFETY - PART 10: SPIRAL ROPES FOR GENERAL STRUCTURAL APPLICATIONS
BS EN 792-1 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 1: ASSEMBLY POWER TOOLS FOR NON-THREADED MECHANICAL FASTENERS
BS EN 745 : 1999 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
BS EN 792-3 : 2000 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 3: DRILLS AND TAPPERS
DIN EN 1889-2:2009-07 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
BS EN 1492-1 : 2000 TEXTILE SLINGS - SAFETY - PART 1: FLAT WOVEN WEBBING SLINGS MADE OF MAN-MADE FIBRES FOR GENERAL PURPOSE USE
BS EN 13557 : 2003 CRANES - CONTROLS AND CONTROL STATIONS
BS EN 609-2 : 2000 AGRICULTURAL AND FORESTRY MACHINERY - SAFETY OF LOG SPLITTERS - PART 2: SCREW SPLITTERS
BS EN 12385-1 : 2002 STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS
10/30216944 DC : 0 BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
BS EN 746-5:2000 Industrial thermoprocessing equipment Particular safety requirements for salt bath thermoprocessing equipment
BS EN 81-70:2003 Safety rules for the construction and installation of lifts Particular applications for passenger and goods passenger lifts. Accessibility to lifts for persons including persons with disability
BS EN 1677-2 : 2000 COMPONENTS FOR SLINGS - SAFETY - PART 2: FORGED STEEL LIFTING HOOKS WITH LATCH, GRADE 8
BS EN 792-9 : 2001 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 9: DIE GRINDERS
BS EN 1804-2 : 2001 MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 2: POWER SET LEGS AND RAMS
BS EN 792-7 : 2001 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 7: GRINDERS
BS EN 1677-6 : 2001 COMPONENTS FOR SLINGS - SAFETY - PART 6: LINKS - GRADE 4
BS EN 1005-3 : 2002 SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
BS EN 1552:2003 Underground mining machines. Mobile extracting machines at the face. Safety requirements for shearer loaders and plough systems
DIN EN 12635:2009-02 Industrial, commercial and garage doors and gates - Installation and use (includes Amendment A1:2008)
DIN EN 704:1999-08 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates - Installation and use
DIN EN 13411-2:2009-02 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 2: SPLICING OF EYES FOR WIRE ROPE SLINGS
EN 12415:2000/A1:2002 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
EN 1151 : 1999 PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING AN ELECTRICAL EFFECT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - REQUIREMENTS, TESTING, MARKING
DIN EN 815:1996-11 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
DIN EN ISO 11806:2009-01 AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY
EN 50308 : 2004 COR 2005 WIND TURBINES - PROTECTIVE MEASURES - REQUIREMENTS FOR DESIGN, OPERATION AND MAINTENANCE
DIN EN 745:1999-08 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
DIN EN 774:1997-12 GARDEN EQUIPMENT - HAND-HELD, INTEGRALLY-POWERED HEDGE TRIMMERS - SAFETY
DIN EN 574:2008-12 SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 50260-1:2002 Safety of hand-held battery-powered motor-operated tools and battery packs - Part 1: General requirements
EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
EN 12385-8:2002 Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
DIN EN 457:1992-04 SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
EN 12321:2003+A1:2009 Underground mining machinery - Specification for the safety requirements of armoured face conveyors
EN 12385-7:2002 Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
EN 13414-3:2003+A1:2008 Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings
DIN EN 13898:2009-09 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
EN 12957:2001+A1:2009 Machine tools - Safety - Electro discharge machines
EN 12840 : 2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
DIN EN 13411-1:2009-02 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 1: THIMBLES FOR STEEL WIRE ROPE SLINGS
EN 50144-2-13:2002 Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws
DIN EN 983:1996-09 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
DIN EN ISO 11806:1997-11 AGRICULTURAL AND FORESTRY MACHINERY - PORTABLE HAND-HELD COMBUSTION ENGINE DRIVEN BRUSH CUTTERS AND GRASS TRIMMERS - SAFETY
DIN EN 983:2009-06 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS - PNEUMATICS
DIN EN 792-12:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS
DIN EN 626-1:2008-09 SAFETY OF MACHINERY - REDUCTION OF RISKS TO HEALTH FROM HAZARDOUS SUBSTANCES EMITTED BY MACHINERY - PART 1: PRINCIPLES AND SPECIFICATIONS FOR MACHINERY MANUFACTURERS
EN 50144-1 : 98 COR 2005 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
DIN EN 815:2009-12 SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
EN 13478:2001+A1:2008 Safety of machinery - Fire prevention and protection
DIN EN 792-10:2001-02 HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 10: COMPRESSION POWER TOOLS
DIN EN 996:2010-02 PILING EQUIPMENT - SAFETY REQUIREMENTS
DIN EN 704:2009-12 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
UNE-EN 415-3:2000 Safety of packaging machines. Part 3: Form, fill and seal machines.
UNE-EN 1804-1:2003 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 1: Support units and general requiremetns.
UNE-EN 1804-2:2003 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Part 2: Power set legs and rams.
ONORM EN 13557 : 2009 CRANES - CONTROLS AND CONTROL STATIONS
UNE-EN 1010-4:2004 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines

EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
EN 50020:2002 Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
ISO 447:1984 Machine tools Direction of operation of controls
EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.