• There are no items in your cart

EN 301 213-5 : 1.1.1

Current

Current

The latest, up-to-date edition.

FIXED RADIO SYSTEMS; POINT-TO-MULTIPOINT EQUIPMENT; POINT-TO-MULTIPOINT DIGITAL RADIO SYSTEMS IN FREQUENCY BANDS IN THE RANGE 24,25 GHZ TO 29,5 GHZ USING DIFFERENT ACCESS METHODS; PART 5: MULTI-CARRIER TIME DIVISION MULTIPLE ACCESS (MC-TDMA) METHODS

Available format(s)

Hardcopy , PDF

Language(s)

English

€17.53
Excluding VAT

Intellectual Property Rights
Foreword
1 Scope
2 References
3 Definitions and abbreviations
  3.1 Definitions
  3.2 Abbreviations
4 General characteristics
4.1 General system architecture
  4.2 Frequency bands and channel arrangements
      4.2.1 Channel plan
      4.2.2 Channel arrangements
  4.3 Compatibility requirements
  4.4 Environmental conditions
  4.5 Power supply
  4.6 Electromagnetic compatibility conditions
  4.7 TMN interfaces
  4.8 Synchronization of interface bit rates
  4.9 Branching/feeder/antenna requirements
5 System parameters for MC-TDMA P-MP systems
  5.1 System capacity
  5.2 Round trip delay
  5.3 Transparency
  5.4 Voice coding methods
  5.5 Transmitter characteristics
      5.5.1 Transmitter output power
      5.5.2 Transmitter nominal output power
      5.5.3 Transmitter power and frequency control
      5.5.4 RF spectrum mask
            5.5.4.1 RF spectrum density mask for the central
                    radio station
            5.5.4.2 RF-spectrum density mask for the terminal
                    station
            5.5.4.3 RF-spectrum density mask for the repeater
                    station
            5.5.4.4 Discrete CW components exceeding the
                    spectrum density mask limit (all stations)
      5.5.5 Tx local oscillator frequency arrangements
      5.5.6 Spurious emissions (external)
      5.5.7 Radio frequency tolerance
  5.6 Receiver characteristics
      5.6.1 Rx local oscillator frequency arrangements
      5.6.2 Spurious emissions (external)
      5.6.3 Receiver IF
  5.7 System performance
      5.7.1 Dynamic level range
      5.7.2 BER as a function of Receiver input Signal
            Level (RSL)
      5.7.3 Equipment Residual BER
      5.7.4 Interference sensitivity
            5.7.4.1 Co-channel interference (external)
            5.7.4.2 Adjacent channel interference (external)
            5.7.4.3 CW interference
      5.7.5 Distortion sensitivity
6 Types of interfaces at the user equipment and the network
  node
Annex A (normative): System type codes for regulatory
        procedures
Annex B (informative): Bibliography
History

Specifies the minimum requirements for system parameters of Multi-Carrier Time Division Multiple Access (TDMA) Point-to-Multipoint (P-MP) Radio Systems in the terrestrial fixed services operating in the band 24,5 GHz to 29,5 GHz.

Committee
TM 4
DocumentType
Standard
Pages
19
PublisherName
European Telecommunications Standards Institute
Status
Current

Standards Relationship
DIN EN 301213-5:2002-11 Identical
NEN EN 301213-5 : 2001 Identical
PN EN 301 213-5 : 2005 Identical

NF EN 302063 : 2003 FIXED RADIO SYSTEMS - MULTIPOINT EQUIPMENT - MULTIPOINT DIGITAL RADIO SYSTEMS OPERATING IN THE 31,0 GHZ TO 33,4 GHZ (32 GHZ) FREQUENCY RANGE
NF EN 301997-1 : 2002 TRANSMISSION AND MULTIPLEXING (TM) - MULTIPOINT EQUIPMENT - RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ - PART 1: GENERAL REQUIREMENTS
NF EN 301997-2 : 2004 TRANSMISSION AND MULTIPLEXING (TM) - MULTIPOINT EQUIPMENT - RADIO EQUIPMENT FOR USE IN MULTIMEDIA WIRELESS SYSTEMS (MWS) IN THE FREQUENCY BAND 40,5 GHZ TO 43,5 GHZ - PART 2: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.