![header thumbnail](/images/img-default-logo.png)
EN 3155-071:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/img-default-logo.png)
Aerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
04-09-2019
05-11-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Designation
6 Marking
7 Technical specification
This European Standard specifies the required characteristics, tests and tooling applicable to female electrical contacts 071, type A, crimp, class S used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated male contacts are defined in EN 3155-008 and EN 3155-070.
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 3155-071. To be read in conjunction with EN 3155-001. (11/2014)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN 3155-071 : 2015 | Identical |
PN EN 3155-071 : 2015 | Identical |
UNI EN 3155-071 : 2010 | Identical |
DIN EN 3155-071:2015-02 | Identical |
SN EN 3155-071 : 2008 | Identical |
NEN EN 3155-071 : 2014 | Identical |
NBN EN 3155-071 : 2014 | Identical |
SN EN 3155-071:2018 | Identical |
NS EN 3155-071 : 2014 | Identical |
NF EN 3155-071 : 2015 | Identical |
I.S. EN 3155-071:2014 | Identical |
UNE-EN 3155-071:2014 | Identical |
BS EN 3155-071:2014 | Identical |
I.S. EN 3155-070:2014 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 070: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
BS EN 3545-002:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Specification of performance and contact arrangements |
BS EN 3545-001:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Technical specification |
11/30257670 DC : DRAFT DEC 2011 | BS EN 3155-070 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 070: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
16/30350074 DC : 0 | BS EN 3155-070 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 070: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
I.S. EN 4165-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
PREN 4165-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
I.S. EN 3545-001:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
I.S. EN 3545-002:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
BS EN 4165-003:2016 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Modules series 2 and series 3. Product standard |
10/30239092 DC : 0 | BS EN 3155-070 - AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 070: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
PREN 3155-070 : 200P2 | AEROSPACE SERIES - ELECTRICAL CONTACTS USED IN ELEMENTS OF CONNECTION - PART 070: CONTACTS, ELECTRICAL, MALE, TYPE A, CRIMP, CLASS S - PRODUCT STANDARD |
I.S. EN 4165-003:2016 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 003: MODULES SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
BS EN 3155-070:2014 | Aerospace series. Electrical contacts used in elements of connection Contacts, electrical, male, type A, crimp, class S. Product standard |
EN 4165-001:2015/AC:2017 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
EN 3155-070:2014 | Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard |
EN 4165-003:2016 | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 003: Modules series 2 and series 3 - Product standard |
EN 3545-002:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements |
EN 3545-001:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification |
BS EN 4165-001:2015 | Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Technical specification |
PREN 4165-003 : 200P3 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 003: MODULES SERIES 2 AND SERIES 3 - PRODUCT STANDARD |
EN 2591-301 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 301: ENDURANCE AT TEMPERATURE |
EN 3155-001:2016 | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification |
EN 2591-305 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 305: RAPID CHANGE OF TEMPERATURE |
EN 2591-319 : 1997 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 319: GASTIGHTNESS OF SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-418 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 418: GAUGE INSERTION/EXTRACTION FORCES (FEMALE CONTACTS) |
EN 2591-425 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 425: UNWRAPPING CAPABILITY, SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-502 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 502: RESTRICTED ENTRY |
EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
SAE AS 81969 : 2016 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
EN 2591 : 1992 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - GENERAL |
EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
EN 2591-201 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 201: CONTACT RESISTANCE - LOW LEVEL |
EN 3155-008:2005 | Aerospace series - Electrical contacts used in elements of connection - Part 008: Contacts, electrical, male, type A, crimp, class S - Product standard |
EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
SAE AS 39029/58 : 2015 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES 1, 2, 3, AND 4, AND MIL-DTL-55302/69 AND MIL-DTL-83733 CONNECTORS) |
EN 2591-417 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 417: TENSILE STRENGTH (CRIMPED CONNECTION) |
EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
EN 2083 : 2001 | AEROSPACE SERIES - COPPER AND COPPER ALLOY CONDUCTORS FOR ELECTRICAL CABLES - PRODUCT STANDARD |
EN 2591-424 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 424: STRIPPING FORCE, SOLDERLESS WRAPPED CONNECTIONS |
EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
EN 2591-406 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 406: MECHANICAL ENDURANCE |
EN 2242 : 2012 | AEROSPACE SERIES - CRIMPING OF ELECTRIC CABLES WITH CONDUCTORS DEFINED BY EN 2083, EN 4434 AND EN 2346 |
EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
EN 2591-204 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 204: DISCONTINUITY OF CONTACTS IN THE MICROSECOND RANGE |
ISO 8843:2005 | Aircraft — Crimp-removable contacts for electrical connectors — Identification system |
EN 3155-070:2014 | Aerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard |
SAE AS 39029/57 : 2015 | CONTACTS, ELECTRICAL CONNECTORS, SOCKET CRIMP REMOVABLE (FOR MIL-DTL-24308, MIL-DTL-38999 SERIES 2, MIL-DTL-55302/68, /71, /72, /75 AND MIL-DTL-83733 CONNECTORS) |
EN 2591-206 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 206: MEASUREMENTS OF INSULATION RESISTANCE |
EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
EN 2591-210 : 1998 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 210: ELECTRICAL OVERLOAD |
EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
EN 4434:2005 | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) |
EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
EN 2591-503 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 503: CONTACT DEFORMATION AFTER CRIMPING |
EN 2591-202 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 202: CONTACT RESISTANCE AT RATED CURRENT |
EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
EN 3155-002:2011 | Aerospace series - Electrical contacts used in elements of connection - Part 002: List and utilization of contacts |
SAE AS 22520 : 2011 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
SAE AS 39029 : 2017 | CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR |
EN 2591-207 : 1996 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 207: VOLTAGE PROOF TEST |
EN 2591-416 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 416: CONTACT BENDING STRENGTH |
EN 2591-415 : 2001 | AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 415: TEST PROBE DAMAGE (FEMALE CONTACTS) |
EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.