EN 3662-001:2006
Current
The latest, up-to-date edition.
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 001: Technical specification
23-08-2006
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Characteristics
7 Tests
8 Qualification tests
9 Quality assurance
10 Marking
11 Delivery conditions
12 Packaging
13 Storage
This standard specifies the three-pole temperature compensated circuit breakers with signal contacts, polarized or not, rated from 20 A to 50 A and used in aircraft on-board circuits. It describes specific environmental, electrical and mechanical characteristics and the stringency of tests to be applied according to test methods of EN 3841-100.These circuit breakers are intended for use in aircraft with electrical supplies in accordance with EN 2282 (all categories).
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 3662-001. (10/2006)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NBN EN 3662-001 : 2006 | Identical |
PN EN 3662-001 : 2008 | Identical |
BS EN 3662-001:2006 | Identical |
NS EN 3662-001 : 1ED 2006 | Identical |
NF EN 3662-001 : 2007 | Identical |
DIN EN 3662-001:2008-02 | Identical |
NEN EN 3662-001 : 2006 | Identical |
SN EN 3662-001 : 2007 | Identical |
UNI EN 3662-001 : 2008 | Identical |
UNE-EN 3662-001:2006 | Identical |
I.S. EN 3662-001:2007 | Identical |
PREN 4728 : DRAFT 2013 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE AND THREE POLES DUMMIES - PRODUCT STANDARD |
BS EN 3662-005:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Product standard |
EN 4728:2015 | Aerospace series - Circuit breakers, single and three poles dummies - Product standard |
EN 3662-005:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard |
EN 3662-006:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard |
BS EN 4728:2015 | Aerospace series. Circuit breakers, single and three poles dummies. Product standard |
I.S. EN 4728:2015 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE AND THREE POLES DUMMIES - PRODUCT STANDARD |
BS EN 3662-006:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Bus-bar version. Product standard |
EN 2282:1992 | Aerospace series - Characteristics of aircraft electrical supplies |
EN 3841-510:2004 | Aerospace series - Circuit breakers - Test methods - Part 510: Strength of signal contact terminals |
MIL-I-81969-1 Revision A:1979 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION C |
EN 3841-401:2004 | Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust |
EN 3841-406:2004 | Aerospace series - Circuit breakers - Test methods - Part 406: Flammability |
EN 3841-509:2004 | Aerospace series - Circuit breakers - Test methods - Part 509: Insertion and extraction forces of signal contact terminals |
EN 3841-402:2004 | Aerospace series - Circuit breakers - Test methods - Part 402: Corrosion |
EN 3841-305:2004 | Aerospace series - Circuit breakers - Test methods - Part 305: Short-circuit performance |
EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
EN 3662-006:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard |
MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
EN 3662-005:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard |
EN 3841-508:2004 | Aerospace series - Circuit breakers - Test methods - Part 508: Centrifugal acceleration |
PREN 2826 : 200P1 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF GAS COMPONENTS IN THE SMOKE |
EN 3841-308:2004 | Aerospace series - Circuit breakers - Test methods - Part 308: Lightning |
EN 3841-307:2004 | Aerospace series - Circuit breakers - Test methods - Part 307: Performance with a locked tripping system |
EN 3841-502:2004 | Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces |
EN 3841-303:2004 | Aerospace series - Circuit breakers - Test methods - Part 303: Dielectric strength |
EN 3841-304:2004 | Aerospace series - Circuit breakers - Test methods - Part 304: Tripping points |
EN 3841-501:2004 | Aerospace series - Circuit breakers - Test methods - Part 501: Actuator button travel |
EN 3841-202:2004 | Aerospace series - Circuit breakers - Test methods - Part 202: Dimensions and masses |
EN 3841-405:2004 | Aerospace series - Circuit breakers - Test methods - Part 405: Fluid resistance |
EN 3841-306:2004 | Aerospace series - Circuit breakers - Test methods - Part 306: Service life |
EN 3841-506:2004 | Aerospace series - Circuit breakers - Test methods - Part 506: Vibration performance |
EN 3841-301:2004 | Aerospace series - Circuit breakers - Test methods - Part 301: Voltage drop |
EN 3841-511:2004 | Aerospace series - Circuit breakers - Test methods - Part 511: Combined test: temperature, altitude and vibration |
EN 3841-504:2004 | Aerospace series - Circuit breakers - Test methods - Part 504: Strength of mounting elements |
EN 3841-403:2004 | Aerospace series - Circuit breakers - Test methods - Part 403: Humidity |
PREN 2825 : 200P1 | AEROSPACE SERIES - BURNING BEHAVIOUR OF NON METALLIC MATERIALS UNDER THE INFLUENCE OF RADIATING HEAT AND FLAMES - DETERMINATION OF SMOKE DENSITY |
EN 3841-100:2004 | Aerospace series - Circuit breakers - Test methods - Part 100: General |
EN 3841-302:2004 | Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance |
TR 6083 : 4 | AEROSPACE SERIES - CUT-OUTS FOR INSTALLATION OF ELECTRICAL COMPONENTS |
PREN 3844-1 : 200P1 | AEROSPACE SERIES - FLAMMABILITY OF NON-METALLIC MATERIALS - PART 1: SMALL BURNER TEST, VERTICAL - DETERMINATION OF THE VERTICAL FLAME PROPAGATION |
EN 3841-505:2004 | Aerospace series - Circuit breakers - Test methods - Part 505: Strength of main terminals |
EN 3841-503:2004 | Aerospace series - Circuit breakers - Test methods - Part 503: Strength of actuating components |
EN 3841-507:2004 | Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks |
EN 3841-404:2004 | Aerospace series - Circuit breakers - Test methods - Part 404: Explosion proofness |
EN 3841-201:2004 | Aerospace series - Circuit breakers - Test methods - Part 201: Visual inspection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.