• Shopping Cart
    There are no items in your cart

EN 3745-301:2012

Current

Current

The latest, up-to-date edition.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation

Published date

16-05-2012

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Preparation of specimens
4 Apparatus
5 Methods

This European Standard specifies procedures for the practical measurement of the attenuation and variation in attenuation of optical fibre or optical cable (both hereafter referred to as fibre). Methods A and B are intended for fibre acceptance testing and shall be performed on fibre lengths greater than 1 km. Method C is intended for attenuation measurement required during environmental and mechanical testing and shall be performed on fibre lengths less than 100 m.

Committee
ASD-STAN
DevelopmentNote
Supersedes PREN 3745-301. (05/2012)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 3745-506:2009 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Impact resistance
BS EN 3745-505:2007 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cable tension strength
16/30342087 DC : DRAFT APR 2016 BS EN 3745-505 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 505: CABLE TENSILE STRENGTH
NF EN 3745-603 : 2008 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 603: NUCLEAR RADIATION
BS EN 3745-514:2009 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cable twist bend
PREN 3745-405 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: LOW/HIGH TEMPERATURE BEND TEST
PREN 3745-504 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 504: MICRO BENDING TEST
PREN 3745-517 : 200P2 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE TIE CLAMPING TEST
PREN 3745-508 : 200P2 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 508: TORSION
I.S. EN 3745-517:2017 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE TIE CLAMPING TEST
I.S. EN 3745-404:2006 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK
NF EN 3745-404 : 2006 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK
BS EN 3745-404:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Thermal shock
BS EN 3745-410:2015 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Thermal life
BS EN 3745-406:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cold bend test
BS EN 3745-512:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Flexure endurance
NF EN 3745-514 : 2009 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 514: CABLE TWIST BEND
I.S. EN 3745-506:2009 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE
17/30361267 DC : 0 BS EN 3745-412 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE
16/30342088 DC : DRAFT APR 2016 BS EN 3745-506 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE
I.S. EN 3745-405:2012 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: LOW/HIGH TEMPERATURE BEND TEST
13/30295417 DC : 0 BS EN 3745-517 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE TIE CLAMPING TEST
13/30295411 DC : 0 BS EN 3745-510 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST
09/30209906 DC : 0 BS EN 3745-516 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST
PREN 4641-001 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
PREN 4641-102 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD
I.S. EN 3745-514:2009 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 514: CABLE TWIST BEND
NF EN 4641-001 : 2009 AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
EN 3745-505:2007 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength
I.S. EN 3745-410:2015 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 410: THERMAL LIFE
I.S. EN 3745-510:2017 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST
ONORM EN 3745-412 : 2006 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE
NF EN 3745-412 : 2006 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE
I.S. EN 3745-516:2017 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST
00/707095 DC : DRAFT MAR 2000 PREN 3745-603 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 603: NUCLEAR RADIATION
BS EN 3745-516:2017 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Severe cable bend test
09/30209904 DC : 0 BS EN 3745-517 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 517: CABLE, FIBER OPTIC, CABLE TIE CLAMPING TEST
BS EN 4641-102:2009 Aerospace series. Cables, optical 125 μm outside diameter cladding Semi-loose 62,5/125 μm GI fibre nominal 1,8 mm outside diameter. Product standard
I.S. EN 4641-102:2009 AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M OUTSIDE DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD
12/30275349 DC : 0 BS EN 3745-410 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 410: THERMAL LIFE
BS EN 3745-603:2008 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Nuclear radiation
BS EN 3745-405:2012 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Low/high temperature bend test
BS EN 4532:2009 Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification
PREN 3745-510 : 200P3 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST
I.S. EN 4641-001:2009 AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION
BS EN 4641-001:2009 Aerospace series. Cables, optical, 125 ?m diameter cladding Technical specification
ONORM EN 3745-404 : 2006 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK
EN 3745-412:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance
EN 3745-514:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend
I.S. EN 3745-412:2006 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 412: HUMIDITY RESISTANCE
98/707384 DC : DRAFT MAY 1998 PREN 3745-513 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 513: CRUSH RESISTANCE
09/30206920 DC : 0 BS EN 3745-405 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: CABLE, FIBER OPTIC, LOW/HIGH TEMPERATURE BEND TEST
06/30155919 DC : 0 BS EN 3745-514 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 514: CABLE TWIST BEND
BS EN 3745-517:2017 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cable tie clamping test
16/30353141 DC : 0 BS EN 3745-404 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 404: THERMAL SHOCK
PREN 3745-507 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 507: CUT-THROUGH
PREN 3745-516 : 200P2 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST
PREN 3745-506 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE
PREN 3745-514 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE TEST METHODS - PART 514: CABLE TWIST BEND
I.S. EN 4532:2009 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
I.S. EN 3745-505:2007 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 505: CABLE TENSILE STRENGTH
BS EN 3745-513:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Crush resistance
BS EN 3745-306:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Variation of attenuation during temperature cycling
BS EN 3745-401:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Accelerated ageing
BS EN 3745-510:2017 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Bending test
BS EN 3745-504:2002 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Micro bending test
BS EN 3745-412:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Humidity resistance
BS EN 3745-508:2002 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Torsion
EN 3745-603:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation
EN 3745-405:2012 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test
EN 3745-401:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing
EN 3745-503:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion
EN 3745-504:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test
EN 3745-507:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-through
EN 3745-512:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance
EN 4532:2009 Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification
EN 3745-404:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock
EN 4641-102:2009 Aerospace series - Cables, optical 125 μm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard
EN 3745-513:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance
EN 3745-517:2017 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
EN 3745-406:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test
EN 3745-510:2017 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
EN 3745-516:2017 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 516: Severe cable bend test
EN 3745-410:2015 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life
EN 3745-306:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling
EN 3745-508:2002 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion
UNI EN 3745-405 : 2012 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 405: LOW/HIGH TEMPERATURE BEND TEST
13/30295414 DC : 0 BS EN 3745-516 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 516: SEVERE CABLE BEND TEST
NF EN 3745-506 : 2010 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE
I.S. EN 3745-603:2008 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 603: NUCLEAR RADIATION
09/30206921 DC : 0 BS EN 3745-510 - AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 510: BENDING TEST
ONORM EN 3745-505 : 2007 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 505: CABLE TENSILE STRENGTH
PREN 3745-513 : 200P1 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 513: CRUSH RESISTANCE
PREN 3745-410 : 200P2 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 410: THERMAL LIFE
NF EN 3745-505 : 2008 AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 505: CABLE TENSILE STRENGTH
EN 4641-001:2009 Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification
EN 3745-506:2009 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 506: Impact resistance
BS EN 3745-503:2005 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Scrape abrasion
BS EN 3745-507:2002 Aerospace series. Fibres and cables, optical, aircraft use. Test methods Cut-through

EN 2591-602:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity
EN 60793-1-40:2003 Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation
EN 3745-100:2008 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General
EN 188000 : 1992 GENERIC SPECIFICATION FOR OPTICAL FIBRES
IEC 60793-1-40:2001 Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation
EN 2591-100:2005 Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General
EN 2591-601:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.