EN 3848:2001
Current
Current
The latest, up-to-date edition.
Aerospace series - Semi-finished metallic products - Methods of measuring form deviations
Published date
19-09-2001
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Measuring condition
4 Sheet and plate
5 Round bar
6 Hexagonal bar
7 Square and rectangular bar
8 Circular tube
This standard specifies the methods of measuring deviations from the nominal form of semi-finished metallic products for aerospace applications.This standard does not apply to:-extruded sections: see EN 2066;-folded sections: see EN 2065
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 3848. (10/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 3848 : 2002 | Identical |
| UNI EN 3848 : 2001 | Identical |
| I.S. EN 3848:2002 | Identical |
| NBN EN 3848 : 2002 | Identical |
| BS EN 3848:2001 | Identical |
| SN EN 3848 : 2001 | Identical |
| NEN EN 3848 : 2001 | Identical |
| PN EN 3848 : 2003 | Identical |
| NS EN 3848 : 1ED 2002 | Identical |
| UNE-EN 3848:2001 | Identical |
| DIN EN 3848:2003-03 | Identical |
| PNE-EN 3848 | Identical |
| DIN EN 6025:1999-04 (Draft) | AEROSPACE SERIES - PLATES - ALUMINIUM ALLOYS 2024, TOLERANCE FLATNESS, THICKNESS 6 MM < A = 55 MM; DIMENSIONS |
| PREN 4180 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - CIRCULAR TUBES FOR FLUIDS - LARGE TOLERANCES - DIAMETER 4 MM <= D <= 40 MM - THICKNESS 0.4 MM <= A <= 2 MM - DIMENSIONS |
| PREN 4045 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS - CAPILLARY TUBES, SEAMLESS - DIAMETER 0,6 MM <= D <= 2 MM - DIMENSIONS |
| BS EN 2622:2001 | Aerospace Series. Circular tubes, for fluids in heat resisting alloys. Diameter 3,2 mm ≤ D ≤ 100 mm. Dimensions |
| BS EN 4045:2001 | Aerospace series. Capillary tubes, seamless in heat resisting alloys. Diameter 0,6 mm ≤ D ≤ 2 mm. Dimensions |
| BS EN 3146:2001 | Aerospace series. Round bars, hot rolled in steel. Close tolerances. Diameter 6mm ≤ D ≤ 250mm. Dimensions |
| BS EN 2045:2001 | Aerospace series. Square bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Thickness 6 mm ≤ a ≤ 50 mm. Dimensions |
| BS EN 2344:2001 | Aerospace series. Round bars, machined in heat resisting alloys. Diameter 10 mm < D < 180 mm. Dimensions |
| BS EN 2617:2001 | Aerospace Series. Plates in titanium and titanium alloys. Thickness 6 mm < a ≤ 100 mm. Dimensions |
| I.S. EN 2589:2017 | AEROSPACE SERIES - STEEL - SHEET AND STRIP, COLD ROLLED - THICKNESS 0,1 MM <= A <= 3 MM - DIMENSIONS |
| BS EN 2044:2001 | Aerospace series. Round bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Diameter 4 mm ≤ D ≤ 63 mm. Dimensions |
| BS EN 2131:2002 | Aerospace series. Plates in aluminium alloys. Thickness 6 mm < a ≤ 160 mm. Dimensions |
| EN 2045:2001 | Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm < a < 50 mm - Dimensions |
| BS EN 2589:2017 | Aerospace series. Steel. Sheet and strip, cold rolled. Thickness 0,1 mm ≤ a ≤ 3 mm. Dimensions |
| PREN 2589 : 200P1 | AEROSPACE SERIES - STEEL - SHEET AND STRIP, COLD ROLLED - THICKNESS 0,1 MM <= A <= 3 MM - DIMENSIONS |
| BS EN 2134:2002 | Aerospace series. Round bars, extruded in aluminium and aluminium alloys. Diameter 10 mm ≤ D ≤ 220 mm. Dimensions |
| BS EN 4180:2002 | Aerospace series. Circular tubes, for fluids in titanium and titanium alloys. Wide tolerances. Diameter 4 mm ≤ D ≤ 40 mm. Dimensions |
| BS EN 3842:2001 | Aerospace series. Circular tubes for fluids in corrosion resistant steel. Diameter 3,2 mm ≤ D ≤ 100 mm. Thickness 0,32 mm ≤ a ≤ 2,5 mm. Dimensions |
| BS EN 3145:2002 | Round bars, hot rolled in steel. Normal tolerances. Diameter 6 mm ≤ D ≤ 250 mm. Dimensions |
| BS EN 2046:2001 | Hexagonal bars, drawn, in aluminium and aluminium alloys. Tolerance class h 11. Width across flats 7 mm ≤ a ≤ 50 mm. Dimensions |
| EN 2589:2017 | Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm ≤ a ≤ 3 mm - Dimensions |
| EN 2046:2001 | Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm < a < 50 mm - Dimensions |
| EN 2622:2001 | Aerospace series - Circular tubes, for fluids in heat resisting alloys-Diameter 3,2 mm < = D < = 100 mm - Dimensions |
| EN 4180:2001 | Aerospace series - Circular tubes, for fluids in titanium and titanium alloys - Wide tolerances<br /><br />Diameter 4 mm < D < 40 mm - Dimensions |
| EN 3146:2001 | Aerospace series - Round bars, hot rolled in steel - Close tolerances - Diameter 6 mm < = D < = 250 mm - Dimensions |
| EN 2257:1997 | Aerospace series - Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm |
| EN 2134:2001 | Aerospace series - Round bars, extruded in aluminium and aluminium alloys - Diameter 10 mm < D < 220 mm - Dimensions |
| EN 3145:2001 | Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions |
| EN 2617:2001 | Aerospace series - Plates in titanium and titanium alloys - Thickness 6 mm < = a < = 100 mm - <br /><br />Dimensions |
| EN 4045:2001 | Aerospace series - Capillary tubes, seamless in heat resisting alloys - Diameter 0,6 mm |
| EN 4267:2001 | Aerospace series - Round bars in titanium and titanium alloys - Diameter 6 mm < = D < = 160 mm - <br /><br />Dimensions |
| EN 2071:2001 | Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0,25 mm < a < 6 mm - Dimensions |
| EN 2258:1997 | Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm |
| EN 2131:2001 | Aerospace series - Plates in aluminium alloys - Thickness 6 mm < a < 160 mm - Dimensions |
| EN 2344:2001 | Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm < = D < = 180 mm - Dimensions |
| EN 2338:2001 | Aerospace series - Sheets, hot rolled in titanium and titanium alloys - Thickness 0,8 mm < = a < = 6 mm - Dimensions |
| EN 2339:2001 | Aerospace series - Sheets, cold rolled in titanium and titanium alloys - Thickness 0,2 mm < = a < = 6 mm - Dimensions |
| EN 2044:2001 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm < D < 63 mm - Dimensions |
| EN 3842:2001 | Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm < = D < = 100 mm - Thickness 0,32 mm < = a < = 2,5 mm - Dimensions |
| EN 3506:2001 | Aerospace series - Hot rolled sheets and plates in heat resisting alloys - Thickness 2,0 mm < = a < = 100 mm - Dimensions |
| BS EN 3506:2001 | Aerospace series. Hot rolled sheets and plates in heat resisting alloys. Thickness 2,0 mm ≤ a ≤ 100 mm. Dimensions |
| BS EN 2338:2001 | Aerospace series. Sheets, hot rolled in titanium and titanium alloys. Thickness 0,8 mm ≤ a ≤ 6 mm. Dimensions |
| BS EN 2071:2002 | Aerospace series. Sheets in aluminium and aluminium alloys. Thickness 0,25 mm ≤ a ≤ 6 mm. Dimensions |
| BS EN 2339:2001 | Aerospace series. Sheets, cold rolled in titanium and titanium alloys. Thickness 0,2 mm ≤ a ≤ 6 mm. Dimensions |
| BS EN 4267:2001 | Aerospace series. Round bar in titanium and titanium alloys. Diameter 6 mm ≤ D ≤ 160 mm. Dimensions |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| EN 2066:2001 | Aerospace series - Extruded section in aluminium alloys - General tolerances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.