EN 438-9:2017
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 9: Classification and specifications for alternative core laminates
20-12-2017
30-06-2018
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Material types and classification system
5 Requirements
Annex A (informative) - Information on reaction to fire
Bibliography
This European Standard specifies performance requirements for high-pressure decorative laminates (HPL) intended for interior use, the core compositions of which are not covered by EN 438-3 [1] to EN 438-6 [4] and EN 438-8 [5]. The core composition types (coloured core and metal reinforced core) are defined in this part of EN 438.EN 438-2 specifies the test methods relevant to this part of EN 438.
| Committee |
CEN/TC 249
|
| DevelopmentNote |
Supersedes PREN 438-9. (12/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| SS-EN 438-9 : 2017 | Identical |
| BS EN 438-9:2017 | Identical |
| NS EN 438-9 : 2017 | Identical |
| PN EN 438-9 : 2018 | Identical |
| NBN EN 438-9 : 2010 + A1 2014 | Identical |
| BS EN 438-9 : 2010 | Identical |
| NF EN 438-9 : 2017 | Identical |
| I.S. EN 438-9:2010 | Identical |
| I.S. EN 438-9:2017 | Identical |
| NEN EN 438-9 : 2018 | Identical |
| NF EN 438-9 : 2010 + A1 2013 | Identical |
| DIN EN 438-9:2014-02 | Identical |
| DIN EN 438-9:2018-03 | Identical |
| UNE-EN 438-9:2018 | Identical |
| EN ISO 11664-2:2011 | Colorimetry - Part 2: CIE standard illuminants (ISO 11664-2:2007) |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| ISO 11925-2:2010 | Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 12572:2016 | Hygrothermal performance of building materials and products — Determination of water vapour transmission properties — Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 438-6:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater |
| ISO 1183-1:2012 | Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method |
| EN 12721:2009+A1:2013 | Furniture - Assessment of surface resistance to wet heat |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| EN 438-8:2009 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 8: Classification and specifications for design laminates |
| ISO 178:2010 | Plastics — Determination of flexural properties |
| EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |