EN 4500-004:2012
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys
Withdrawn date
30-04-2013
Published date
10-10-2012
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Rules for drafting and presentation
Bibliography
This European Standard specifies the specific rules for the drafting and presentation of titanium and titanium alloy material standards for aerospace applications.It should be used in conjunction with EN 4500-001.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 4500-004. To be read in conjunction with EN 4500-001. (10/2012)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NF EN 4500-004 : 2013 | Identical |
| UNE-EN 4500-004:2012 | Identical |
| UNI EN 4500-004 : 2014 | Identical |
| BS EN 4500-004:2012 | Identical |
| NBN EN 4500-004 : 2012 | Identical |
| NEN EN 4500-004 : 2012 | Identical |
| DIN EN 4500-004:2012-12 | Identical |
| SN EN 4500-004:2013 | Identical |
| PN EN 4500-004 : 2013 | Identical |
| I.S. EN 4500-004:2012 | Identical |
| NS EN 4500-004 : 2012 | Identical |
| DS EN 4500-004 : 2012 | Identical |
| I.S. EN 3354:2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-6AL-4V - ANNEALED - SHEET FOR SUPERPLASTIC FORMING - A <= 6 MM |
| BS EN 3813:2013 | Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar and wire for forged fasteners. D<sub>e</sub> ≤ 50 mm |
| BS EN 3351:2012 | Aerospace series. Titanium alloy Ti-4Al-4Mo-2Sn. Solution treated and aged. Forgings. De ≤ 150 mm |
| I.S. EN 3451:2017 | AEROSPACE SERIES - TITANIUM TI-P99002 - NOT HEAT TREATED - GRADE 2 FORGING STOCK, FOR ANNEALED FORGINGS - A OR D <= 300 MM |
| BS EN 3451:2017 | Aerospace series. Titanium TI-P99002. Not heat treated. Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm |
| BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
| UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| 11/30254398 DC : 0 | BS EN 4685 - AEROSPACE SERIES - TITANIUM TI10V2FE3AL - BARS - D < 110 MM - R[M] >= 1240 MPA |
| UNI EN 3456 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| UNI EN 3813 : 2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - DE <= 50 MM |
| 11/30242532 DC : DRAFT JAN 2011 | BS EN 3351 - AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 (TI-4AL-4MO-2SN) - SOLUTION TREATED AND AGED - FORGINGS - D[E] <= 150 MM |
| EN 3351:2012 | Aerospace series - Titanium alloy Ti-4Al-4Mo-2Sn - Solution treated and aged - Forgings - De ≤ 150 mm |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| EN 3813:2013 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar and wire for forged fasteners - De ≤ 50 mm |
| EN 3354:2013 | Aerospace series - Titanium alloy Ti-6Al-4V - Annealed - Sheet for superplastic forming - a ≤ 6 mm |
| EN 3451:2017 | Aerospace series - Titanium TI-P99002 - Not heat treated - Grade 2 forging stock, for annealed forgings - a or D ≤ 300 mm |
| BS EN 3354:2013 | Aerospace series. Titanium alloy Ti-6Al-4V. Annealed. Sheet for superplastic forming. a ≤ 6 mm |
| I.S. EN 3813:2013 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 (TI-6AL-4V) - ANNEALED - BAR AND WIRE FOR FORGED FASTENERS - D[E] <= 50 MM |
| I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
| ASD-STAN prEN 4500-003 P3:2023 | Aerospace series Metallic materials — Rules for drafting and presentation of material standards — Part 003: Specific rules for heat-resisting alloys |
| ASD-STAN prEN 3311 P3:2023 | Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) — Annealed — Bars for machining — D < 300 mm — 900 MPa ≤ Rm ≤ 1 160 MPa |
| NS-EN 3311:2023 | Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa |
| EN ISO 12737:2010 | Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010) |
| EN 2545-1:1995 | Aerospace series - Titanium and titanium alloy remelting stock and castings - Technical specification - Part 1: General requirements |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| EN 2003-009:2007 | Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination |
| PREN 2957 : 200P1 | AEROSPACE SERIES - METHOD OF PREPARATION OF FORGED SAMPLES |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN 3114-002:2007 | Aerospace series - Test method - Microstructure of (α + β) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 9649:2016 | Metallic materials — Wire — Reverse torsion test |
| EN 4800-006:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
| PREN 2043 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL REQUIREMENTS FOR SEMI-FINISHED PRODUCT QUALIFICATION (EXCLUDING FORGINGS AND CASTINGS) |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| ISO 12737:2010 | Metallic materials Determination of plane-strain fracture toughness |
| EN 3684:2007 | Aerospace series - Test methods - Titanium alloy wrought products - Determination of β transus temperature - Metallographic method |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| PREN 3322 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - SOLUTION TREATED AND AGED - GRADE 1 - FORGINGS - D[E] <= 75 MM |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 4800-001:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip |
| EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| ISO 7802:2013 | Metallic materials — Wire — Wrapping test |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| EN 2954-002:2010 | Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings |
| EN 4800-005:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 4800-002:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
| EN 4800-003:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube |
| EN 4800-004:2010 | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.