UNI EN 13263-2 : 2009
|
SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
EN 450-2:2005
|
Fly ash for concrete - Part 2: Conformity evaluation |
I.S. EN 14382:2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
EN 15167-2:2006
|
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
UNE-EN 16622:2016
|
Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
CEN/TR 15472:2006
|
Postal services - Measurement of transit times for parcels by the use of a track and trace system |
EN 13263-1:2005+A1:2009
|
Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
EN 1946-1:1999
|
Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria |
EN 14175-2:2003
|
Fume cupboards - Part 2: Safety and performance requirements |
BS EN ISO 16484-2:2004
|
Building automation and control systems (BACS) Hardware |
I.S. EN 15085-1:2007
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
EN 13597:2003
|
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
I.S. EN 13263-1:2005
|
SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
UNI EN 15167-2 : 2006
|
GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
CR 14245:2001
|
Guidelines for the application of EN 197-2 "Conformity Evaluation" |
CEN/TS 14773:2004
|
Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters |
CEN/TR 15840:2009
|
Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
EN 50187 : 96 AC 96
|
GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
BS EN 16622:2015
|
Silica-calcium fume for concrete. Definitions, requirements and conformity criteria |
EN 61400-22:2011
|
Wind turbines - Part 22: Conformity testing and certification |
CEN Guide 14:2010
|
Common policy guidance for addressing standardisation on qualification of professions and personnel |
EN 45011:1998
|
General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
CEN/TR 14245:2014
|
Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
EN 14175-1:2003
|
Fume cupboards - Part 1: Vocabulary |
EN 13263-2:2005+A1:2009
|
Silica fume for concrete - Part 2: Conformity evaluation |
I.S. EN 13263-2:2005
|
SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
EN 13701:2001
|
Space systems - Glossary of terms |
EN 10256:2000
|
Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnel |
EN 62020:1998/A1:2005
|
ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS) |
CEN/TR 16912:2016
|
Guidelines for a procedure to support the European standardization of cements |
UNI EN 13263-1 : 2009
|
SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
EN 16601-00-01:2015
|
Space systems - Glossary of terms |
EN ISO 16484-2:2004
|
Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
EN 13913:2003
|
Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
UNE-EN 13282-3:2015
|
Hydraulic road binders - Part 3: Conformity evaluation |
CEN/TS 15674:2007
|
Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods |
DIN EN 13263-1:2009-07
|
SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
DIN EN ISO 16484-2:2004-10
|
Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
DIN EN 13263-2:2009-07
|
SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
DIN EN 15198:2007-11
|
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
BS EN 15167-2:2006
|
Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
PD CEN/TR 14245:2014
|
Cement. Guidelines for the application of EN 197-2 Conformity Evaluation |
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
DIN EN 197-2:2000-11
|
CEMENT - PART 2: CONFORMITY EVALUATION |
BS 0-1:1991
|
A standard for standards Guide to general principles of standardization |
BS EN 1826:1997
|
Biotechnology. Large-scale process and production. Control procedures for raw materials |
BS EN 15085-1 : 2007
|
RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL |
DIN EN 16622:2016-02
|
SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
BS EN 1946-1:1999
|
Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties Common criteria |
BS EN 14137:2003
|
Postal services. Quality of service. Measurement of loss of registered mail and other types of postal service using a track and trace system |
BS EN 45012:1998
|
General requirements for bodies operating assessment and certification/registration of quality systems |
DIN EN 14382:2016-05 (Draft)
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
DIN EN 15085-1:2013-11
|
Railway applications - Welding of railway vehicles and components - Part 1: General (includes Amendment A1:2013) |
EN 13725:2003/AC:2006
|
AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
BS EN 13263-2 : 2005
|
SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
BS EN 14817:2006
|
Railway applications. Suspension components. Air-spring control elements |
DIN EN 14175-2:2003-08
|
FUME CUPBOARDS - PART 2: SAFETY AND PERFORMANCE REQUIREMENTS |
BS EN 60068-5-2:2000
|
Environmental testing. Guide to drafting of test methods Terms and definitions |
DD CEN/TS 15674:2007
|
Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods |
ISO/IEC Guide 62:1996
|
General requirements for bodies operating assessment and certification/registration of quality systems |
DIN EN 13597:2008-04
|
Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
EN 197-2:2014
|
Cement - Part 2: Conformity evaluation |
VDI 3814 Blatt 1:2009-11
|
Building automation and control systems (BACS) - System basics |
BS EN 13263-1 : 2005
|
SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA |
PD CEN/TR 16912:2016
|
Guidelines for a procedure to support the European standardization of cements |
BS EN 197-2:2014
|
Cement Conformity evaluation |
BS EN 13701:2001
|
Space systems. Glossary of terms |
ISO 16484-2:2004
|
Building automation and control systems (BACS) — Part 2: Hardware |
DIN EN 14817:2006-08
|
Railway applications - Suspension components - Air spring control elements |
DIN EN 13913:2003-08
|
RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS |
BS EN 16601-00-01:2015
|
Space systems. Glossary of terms |
DIN EN 197-2:2014-05
|
CEMENT - PART 2: CONFORMITY EVALUATION |
PD CEN/TR 15472:2006
|
Postal services. Measurement of transit times for parcels by the use of a track and trace system |
ISO/IEC Guide 65:1996
|
General requirements for bodies operating product certification systems |
EN 14382:2005+A1:2009/AC:2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
BS EN 14175-2:2003
|
Fume cupboards Safety and performance requirements |
BS EN 45003:1995
|
Calibration and testing laboratory accreditation systems. General requirements for operation and recognition |
ISO 10795:2011
|
Space systems Programme management and quality Vocabulary |
BS EN 450-2:2005
|
Fly ash for concrete Conformity evaluation |
EN 13282-3:2015
|
Hydraulic road binders - Part 3: Conformity evaluation |
DIN EN 13282-3:2015-06
|
HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
DIN EN ISO 16484-2:2016-08 (Draft)
|
BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: HARDWARE |
BS EN 14175-1:2003
|
Fume cupboards Vocabulary |
BS EN 62020:1999
|
Electrical accessories. Residual current monitors for household and similar uses (RCMs) |
BS ISO 10795:2011
|
Space systems. Programme management and quality. Vocabulary |
BS EN 45011:1998
|
General requirements for bodies operating product certification systems |
PD CEN/TR 15840:2009
|
Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
DIN EN 450-2:2005-05
|
Fly ash for concrete - Part 2: Conformity evaluation |
UNE-EN 61400-22:2011
|
Wind turbines - Part 22: Conformity testing and certification |
BS EN 10256:2000
|
Non-destructive testing on steel tubes. Qualification and competence of level 1 and level 2 non-destructive testing personnel |
BS EN 13597:2003
|
Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
DD CEN/TS 14773:2004
|
Postal services. Quality of service. Measurement of loss and substantial delay of priority and first class single piece mail using a survey of test letters |
BS EN 13913:2003
|
Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
EN 16622:2015
|
Silica-calcium fume for concrete - Definitions, requirements and conformity criteria |
BS EN 14382 : 2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
EN 15085-1:2007+A1:2013
|
Railway applications - Welding of railway vehicles and components - Part 1: General |
BS EN 15198:2007
|
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
BS EN 13282-3:2013
|
Hydraulic road binders Conformity evaluation |
EN 15198:2007
|
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres |
UNE-EN 15085-1:2008
|
Railway applications - Welding of railway vehicles and components - Part 1: General |
CEI EN 50187 : 1998
|
GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
PD CR 14245:2001
|
Guidelines for the application of EN 197-2. Conformity Evaluation |