EN 4532:2009
Current
The latest, up-to-date edition.
Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification
18-02-2009
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Description
4.1 Construction of type 'A' primary fibre
(Jacketed fibre)
4.2 Construction of type 'B' single core cable
5 Cable characteristics
5.1 Optical performance of cable
5.2 Construction data of cable (Type B)
5.3 Mechanical characteristics of cable (Type B)
6 Fibre characteristics
6.1 Optical and material data of primary fibre
6.2 Geometrical data of primary fibre and
concentricity of primary coating
7 Environmental conditions
7.1 Temperature range
7.2 Operating pressure range
7.3 Humidity
7.4 Nuclear radiation
8 Production acceptance (routine) tests
8.1 General
8.2 Group A - Production acceptance (routine) tests
8.3 Group B - Production verification (quality) tests
8.4 Group D - Qualification approval tests
(cable type 'B')
9 Additional test information
9.1 Repeatability of test results
9.2 Definition of full launch conditions
9.3 Full launch techniques
9.4 Additional requirements
9.5 Practical realisation
9.6 Test arrangement for low- and high- temperature
tests
10 Marking and packaging requirements
10.1 Designation of type 'A' primary fibre
10.2 Designation of type 'B' cable
10.3 Marking of cable
10.4 Ordering information
10.5 Cable length
10.6 Storage reel
This standard covers two cable types, Type A and Type B.Type A, jacketed fibre, is intended for printed circuit board inter-connection applications inside equipment. Type B, single core, is intended for general airframe and equipment inter-connection cable suitable for installation in all aircraft locations, with exception of power plant compartments.These cables are particularly suitable for use in military aircraft as well as for general civil aircraft applications.
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 4532. (05/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 4532:2009 | Identical |
BS EN 4532:2009 | Identical |
NS EN 4532 : 2009 | Identical |
I.S. EN 4532:2009 | Identical |
SN EN 4532 : 2009 | Identical |
NEN EN 4532 : 2009 | Identical |
PN EN 4532 : 2011 | Identical |
DIN EN 4532:2009-08 | Identical |
NBN EN 4532 : 2009 | Identical |
UNI EN 4532 : 2010 | Identical |
NF EN 4532 : 2009 | Identical |
01/704961 DC : 0 | PREN 3733-005 - AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING - OPERATING TEMPERATURES UP TO 150 DEGREE C CONTINUOUS - PART 005: RECEPTACLE, CONNECTOR, TWO HOLE FIXING FOR CABLE TO EN 4532 - PRODUCT STANDARD |
TR 4643 : 2009 | AEROSPACE SERIES - EPOXY FOR FIBRE OPTIC CONNECTORS TO EN 3733 - OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS |
01/715302 DC : 0 | BS EN 3733-007 - AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR - SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING - OPERATING TEMPERATURES UP TO 150 DEGREES C CONTINUOUS - PART 007: FERRULE (OPTICAL CONTACT) FOR EN 4532 (200/280 MICRO M FIBRE) - PRODUCT STANDARD |
PREN 3733-005 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 005: RECEPTACLE, CONNECTOR, TWO HOLE FIXING FOR CABLE TO EN 4532 - PRODUCT STANDARD |
PREN 3733-006 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 006: RECEPTACLE, CONNECTOR, JAM NUT FIXING FOR CABLE TO EN 4532 - PRODUCT STANDARD |
PREN 3733-003 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 003: PLUG CONNECTOR FOR CABLE TO EN 4532 - PRODUCT STANDARD |
PREN 3733-004 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 004: RECEPTACLE, CONNECTOR, FOUR HOLE FIXING FOR CABLE TO EN 4532 - PRODUCT STANDARD |
PREN 3733-002 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 002: LIST OF PRODUCT STANDARDS |
01/704962 DC : 0 | PREN 3733-006 - AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING - OPERATING TEMPERATURES UP TO 150 DEGREE C CONTINUOUS - PART 006: RECEPTACLE, CONNECTOR, JAM NUT FIXING FOR CABLE TO EN 4532 - PRODUCT STANDARD |
EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
EN 3745-305:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling |
EN 3745-205:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 205: Cable longitudinal dimensional stability |
EN 3745-512:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
EN 2591-316:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
EN 3745-705:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement |
EN 3745-202:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
EN 3745-602:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity |
EN 3745-301:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation |
IEC 60793-1:1992 | Optical fibres - Part 1: Generic specification |
IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
PREN 3733-001 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
EN 3745-503:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
EN 3745-603:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603: Nuclear radiation |
EN 3745-411:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids |
MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
EN 3745-513:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
EN 3745-100:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General |
EN 3745-505:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength |
EN 3745-406:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
EN 3745-203:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions |
IEC 60874-1:2011 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
EN 3745-601:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density |
EN 3745-402:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling |
EN 3745-412:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance |
EN 3745-401:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
EN 3745-514:2009 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend |
PREN 3745-506 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
EN 3745-407:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407: Flammability |
ISO 2574:1994 | Aircraft — Electrical cables — Identification marking |
EN 3745-510:2017 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test |
ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.