• Shopping Cart
    There are no items in your cart

EN 4611-006:2012

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between –65 °C and 150 °C - Dual extruded wall for open applications - UV laser printable - Product standard

Superseded date

22-03-2022

Superseded by

EN 4611-006:2018

Published date

08-02-2012

Sorry this product is not available in your region.

Foreword
1 Scope
2 Normative references
3 Definitions and symbols
4 Materials and construction
5 Required characteristics
6 Quality assurance
7 Designation
8 Identification and marking
9 Packaging, labelling and delivery lengths
10 Technical specification

This European Standard specifies the characteristics of UV laser printable, silver plated copper conductor, electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene co-polymer XLETFE family for use in the on-board electrical systems of aircraft at operating temperatures between - 65 ºC and 150 ºC, operating at voltages not exceeding 600 V r.m.s and frequencies not exceeding 2 000 Hz. These cables are suitable for airframe use without additional protection. In case of conflict between this European Standard and other referenced documents the requirements of this European Standard should take precedence.

Committee
ASD-STAN
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

PREN 4612-010 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 010: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
PREN 4612-009 : 200P1 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 009: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4612-010 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 010: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT
17/30368775 DC : 0 PREN 4612-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY XLETFE FAMILY JACKETED OR SCREENED AND JACKETED - PART 010: SILVER PLATED COPPER OPERATING TEMPERATURES, BETWEEN 65 DEGREES C AND 150 DEGREES C DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) UV LASER PRINTABLE - PRODUCT STANDARD
NF EN 4612-009 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 009: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD
NF EN 4612-010 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 010: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET AND SCREEN (BRAID) - UV LASER PRINTABLE - PRODUCT STANDARD
UNI EN 4612-009 : 2012 AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 009: SILVER PLATED COPPER - OPERATING TEMPERATURES, BETWEEN -65 DEGREES C AND 150 DEGREES C - DUAL EXTRUDED WALL FOR OPEN APPLICATIONS, WITH JACKET WITHOUT SCREEN - UV LASER PRINTABLE - PRODUCT STANDARD

EN 3475-401:2002 Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing
EN 3475-504:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 504: Torsion
EN 3475-703:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking
EN 3475-409:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 409: Air-excluded ageing
EN 3475-302:2006 Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test
EN 3475-511:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 511: Cable-to-cable abrasion
EN 3475-411:2014 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
EN 3475-202:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 202: Mass
EN 3475-507:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 507: Adherence of plating
EN 3475-502:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 502: Notch propagation
EN 3475-405:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature
EN 2235:2015 Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification
EN 4611-002:2012 Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General
EN 3475-410:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
EN 3475-506:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 506: Plating continuity
EN 3475-305:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 305: Overload resistance
EN 2083:2001 Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard
EN 3475-602:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity
EN 3475-404:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 404: Thermal shock
EN 3475-512:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 512: Flexure endurance
EN 3475-509:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 509: Solderability
EN 3475-201:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination
EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN 3475-702:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 702: Screen pushback capability
EN 3475-413:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 413: Wrap back test
EN 3475-303:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
EN 3475-601:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density
EN 3475-304:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 304: Surface resistance
EN 3475-503:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 503: Scrape abrasion
EN 3475-301:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 301: Ohmic resistance per unit length
EN 3475-706:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability
EN 3475-403:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 403: Delamination and blocking
EN 3475-402:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 402: Shrinkage and delamination
EN 3475-510:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 510: Tensile strength and elongation of extruded insulation, sheath and jacket material
EN 3475-100:2010 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General
EN 2084:2015 Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification
EN 3475-203:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions
EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
EN 3475-704:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 704: Flexibility
EN 3475-412:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 412: Humidity resistance
EN 3475-408:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408: Fire resistance
EN 3475-501:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501: Dynamic cut-through
EN 3475-406:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 406: Cold bend test
EN 3475-705:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement
EN 3475-701:2017 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor
EN 3475-508:2007 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
EN 3475-407:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 407: Flammability

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.