EN 4640-001:2009
Current
The latest, up-to-date edition.
Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
25-02-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Description
5 Design
6 Definition drawings
7 Tests
8 Quality assurance
9 Designation and marking
This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular multipin fibre optic connectors.
Committee |
ASD-STAN
|
DevelopmentNote |
Supersedes PREN 4640-001. (05/2009)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS EN 4640-001:2009 | Identical |
NF EN 4640-001 : 2009 | Identical |
I.S. EN 4640-001:2009 | Identical |
SN EN 4640-001 : 2009 | Identical |
UNE-EN 4640-001:2009 | Identical |
NEN EN 4640-001 : 2009 | Identical |
UNI EN 4640-001 : 2010 | Identical |
NBN EN 4640-001 : 2009 | Identical |
PN EN 4640-001 : 2010 | Identical |
DIN EN 4640-001:2009-09 | Identical |
NS EN 4640-001 : 2009 | Identical |
BS EN 4640-002:2009 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder List of product standards |
I.S. EN 4640-002:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTI CONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: LIST OF PRODUCT STANDARDS |
EN 4640-002:2009 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards |
EN 4640-004:2008 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard |
EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
EN 2591-6401:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6401: Optical elements - Acceleration steady state |
EN 2591-6324:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6324: Optical elements - Interfacial sealing |
EN 2591-6405:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6405: Optical elements - Axial load |
EN 2591-602:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 602: Optical elements - Variation of attenuation and optical discontinuity |
EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
EN 2591-603:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 603: Optical elements - Change of power distribution |
EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
EN 2591-612:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 612: Optical elements - Effectiveness of cable attachment - Cable axial compression |
EN 2591-610:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 610: Optical elements - Effectiveness of cable attachment - Cable pulling |
EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
EN 2591-611:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 611: Optical elements - Effectiveness of cable attachment - Cable torsion |
EN 2591-6317:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6317: Optical elements - Flammability |
EN 2591-6307:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6307: Optical elements - Salt mist |
EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
EN 2591-605:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 605: Optical elements - Return loss |
EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
EN 2591-607:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 607: Optical elements - Immunity to ambient light coupling |
EN 2591-6402:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6402: Optical elements - Shock |
EN 2591-6403:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6403: Optical elements - Vibrations |
EN 2591-614:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 614: Optical elements - Connector radial compression |
MIL-I-81969-14 Revision C:1987 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE 3, CLASS 2, COMPOSITION B |
EN 2591-6316:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6316: Optical elements - Ozone resistance |
EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
EN 2591-6321:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6321: Optical elements - Damp heat, cyclic test |
EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
EN 2591-6318:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6318: Optical elements - Fire resistance |
EN 2591-6101:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6101: Optical elements - Visual examination |
EN 4640-002:2009 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards |
PREN 3197 : 200P2 | AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS |
EN 2591-6404:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6404: Optical elements - Transverse load |
EN 2591-6314:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6314: Optical elements - Immersion at low air pressure |
EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
EN 2591-609:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
EN 2591-6301:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6301: Optical elements - Endurance at temperature |
EN 2591-100:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100: General |
EN 2591-6323:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6323: Optical elements - Thermal shock (Hermetically sealed devices) |
EN 2591-6415:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage |
EN 2591-604:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 604: Optical elements - Cleaning capability of optical face |
EN 2591-6303:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6303: Optical elements - Cold/low pressure and damp heat |
EN 2591-613:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 613: Optical elements - Impact test |
EN 2591-617:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 617: Optical elements - Temperature cycling |
EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
EN 4639-101:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product standard |
EN 2591-601:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 601: Optical elements - Insertion loss |
EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
EN 2591-615:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 615: Optical elements - Connection integrity at temperature |
EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
EN 2591-6414:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6414: Optical elements - Unmating of lanyard release optical connection elements |
EN 4640-003:2008 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard |
EN 3909:2016 | Aerospace series - Test fluids and test methods for electrical and optical components and sub-assemblies |
EN 2591-6306:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6306: Optical elements - Mould growth |
EN 2591-6315:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6315: Optical elements - Fluid resistance |
EN 2591-6406:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6406: Optical elements - Mechanical endurance |
EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
EN 2591-6305:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 6305: Optical elements - Rapid change of temperature |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.