• There are no items in your cart

EN 50020:2002

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i'

Superseded date

01-01-2007

Published date

14-06-2002

1. Scope
2. Normative references
3. Definitions
4. Grouping and classification of intrinsically safe
    apparatus and associated apparatus
5. Intrinsically safe levels of protection of electrical
    apparatus
6. Apparatus construction
7. Components on which intrinsic safety depends
8. Infallible components, infallible assemblies of
    components and infallible connections
9. Diode safety barriers
10. Type verifications and type tests
11. Routine verifications and tests
12. Marking
13. Documentation
Annex A (normative) Assessment of intrinsically safe circuits
Annex B (normative) Spark test apparatus for intrinsically safe
        circuits
Annex C (informative) Measurement of creepage distances,
        clearances and separation distances through casting
        compound and through solid insulation
Annex D (normative) Encapsulation
Annex E (normative) Certification requirements for torches

Specifies the construction and testing of intrinsically safe apparatus, meant for use in potentially explosive atmospheres and for associated apparatus, which is meant for connection to intrinsically safe circuits which enter such atmospheres. Coverage includes: documentation, marking, and diode safety barriers. Also gives detailed definitions and annexes.

Committee
CLC/TC 31
DevelopmentNote
To be read in conjunction with EN 50014:1997. (09/2002)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Superseded
SupersededBy

Standards Relationship
PN EN 50020 : 2005 Identical
NBN EN 12941 : 1998 AMD 2 2009 Identical
CEI EN 50020 : 2003 COR 1 2004 Identical
IEC 60079-3:1990 Corresponds
VDE 0170-7 : 2012 Identical
BS EN 50020:2002 Identical
I.S. EN 50020:2002 Identical
SN EN 50020 : 2002 Identical
NBN EN 146 : 1992 Identical
NEN EN 50020 : 2002 Identical
NBN EN 50020 : 2003 Identical
UNE-EN 50020:2003 Identical
DIN EN 50020 : 2003 Identical
NF EN 50020 : 2004 Identical
NFC 23 520 : 98 PR Corresponds
BS 5501-7:1977 Corresponds

IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
SAE AS 5116 : 2003 MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR GROUND ICE DETECTION SYSTEMS
I.S. EN 145:1998 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED CLOSED-CIRCUIT BREATHING APPARATUS COMPRESSED OXYGEN OR COMPRESSED OXYGEN-NITROGEN TYPE - REQUIREMENTS, TESTING, MARKING
03/119040 DC : DRAFT NOV 2003 PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 14593-1:2005-07 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
02/710618 DC : DRAFT SEP 2002 BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
PD CLC/TR 50427:2004 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation. Guide
DD CEN/TS 13763-27:2003 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for electronic initiation systems
97/720419 DC : DRAFT DEC 1997 PREN 1009-3 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: CRUSHING AND MILLING MACHINERY
94/712993 DC : DRAFT NOV 1994 PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
BS EN 50033:1991 Specification for construction and testing of miners\' caplamps in relation to the risk of explosion, for mines susceptible to firedamp
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. CLC TR 50427:2005 ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE
04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
VDE 0660-212 : 2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
07/30166909 DC : DRAFT AUG 2007 BS EN 15714-2 - INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
DIN EN 45510-2-7:2003-12 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS EN 50019:2000 Electrical apparatus for potentially explosive atmospheres. Increased safety \'e\'
CEI EN 50033 : 1998 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP
BS EN 50021:1999 Electrical apparatus for potentially explosive atmospheres. Type of prot ection \'n\'
I.S. EN 61779-1:2003 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
DIN EN 60947-5-6 : 2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS, DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
DIN EN 13763-26:2004-11 Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004
DIN EN 13135-1:2011-04 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
BS EN 13763-26:2004 Explosives for civil uses. Detonators and relays Definitions, methods and requirements for devices and accessories for reliable and safe functioning of detonators and relays
BS EN 13616:2004 Overfill prevention devices for static tanks for liquid petroleum fuels
BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
DIN EN 137:2007-01 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
DIN EN 12312-5:2009-08 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009)
HD 637 S1:1999/corrigendum:2005 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
EN 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
EN 50021 : 99 COR 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N"
EN 12405 : 2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
EN 50381 : 2004 COR 2005 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
DIN EN ISO 12100-2:2004-04 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
DIN EN 14492-2:2010-05 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 50054:1998 Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods
06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
UNI EN ISO 8230-3 : 2009 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
02/637047 DC : DRAFT APR 2002 BS EN 50174-3 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
CEI EN 50394-1 : 2005 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GROUP 1 - INSTRINSICALLY SAFE SYSTEMS - PARTE 1: COSTRUZIONI E PROVE
I.S. EN 12405:2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
04/30115023 DC : DRAFT JUL 2004 CLC TR 50427 - ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE
BS EN 45510-2-7:2002 Guide for the procurement of power station equipment. Electrical equipment Switchgear and controlgear
BS EN 50281-1-1:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing
CLC/TR 50404:2003 Electrostatics - Code of practice for the avoidance of hazards due to static electricity
BS EN 50227:1999 Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
05/30132851 DC : DRAFT APR 2005 EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
CEI UNI EN 45510-2-7 : 2006 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
BS EN 50381:2004 Transportable ventilated rooms with or without an internal source of release
BS EN 50016:2002 Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus \'p\'
ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
NF EN 50303 : 2000 GROUP I, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST
I.S. EN 50059:1991 SPECIFICATION FOR ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT FOR NON-FLAMMABLE MATERIAL FOR PAINTING AND FINISHING
VDE 0745-200 : 1992 SPECIFICATION FOR ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT FOR NON-FLAMMABLE MATERIAL FOR PAINTING AND FINISHING
I.S. EN 14492-2:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 14492-1:2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 137:2006 RESPIRATORY PROTECTIVE DEVICES - SELF-CONTAINED OPEN-CIRCUIT COMPRESSED AIR BREATHING APPARATUS WITH FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 14492-1:2010-06 Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009)
DIN EN 13616:2004-09 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 12921-3:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
DIN EN 13135-1:2004-05 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
DIN EN 12405:2003-10 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
I.S. EN 12312-5:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 13636:2004-10 Cathodic protection of buried metallic tanks and related piping; German version EN 13636:2004
I.S. EN 12012-3:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
UNI EN 764-7 : 2004 PRESSURE EQUIPMENT - SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
VDE 0165-10 : 1999 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
DIN EN 50303 : 2001-05 GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST
VDE 0400-40-1 : 2000 AMD 1 2004 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
VDE 0170-12-2 : 2001-05 GROUP 1, CATEGORY M1 EQUIPMENT INTENDED TO REMAIN FUNCTIONAL IN ATMOSPHERES ENDANGERED BY FIREDAMP AND/OR COAL DUST
VDI/VDE 2184:2008-06 Reliable operation and maintenance of field bus systems
BS EN 50394-1:2004 Electrical apparatus for potentially explosive atmospheres. Group I. Intrinsically safe systems Construction and testing
BS EN 50018:2000 Electrical apparatus for potentially explosive atmospheres. Flameproof enclosure \'d\'
CLC/TR 50427:2004 Assessment of inadvertent ignition of flammable atmospheres by radio-frequency radiation - Guide
00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
04/30124466 DC : DRAFT OCT 2004 EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours General requirements and test methods
04/30112677 DC : 0 IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
BS EN 50015:1998 Electrical apparatus for potentially explosive atmospheres. Oil immersion \'o\'
DIN EN ISO 8230-3:2009-05 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
97/720418 DC : DRAFT DEC 1997 EN 1009-2 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: FEEDING MACHINERY
05/30131803 DC : DRAFT APR 2005 EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 50014:1998 Electrical apparatus for potentially explosive atmospheres. General requirements
DIN VDE 0745-200 : 1992 SPECIFICATION FOR ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT FOR NON-FLAMMABLE MATERIAL FOR PAINTING AND FINISHING
EN 50059:1990 Specification for electrostatic hand-held spraying equipment for non-flammable material for painting and finishing
I.S. EN 50018:2001 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
CEI EN 50381 : 2006 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
I.S. EN 45510-2-7:2002 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
I.S. EN 50394-1:2004 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GROUP 1 - INTRINSICALLY SAFE SYSTEMS; PART 1: CONSTRUCTION AND TESTING
DIN EN 1710:2008-08 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
BS EN 292-2:1991 Safety of machinery. Basic concepts, general principles for design Technical principles and specifications
BS EN 12921-3 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
BS EN 12312-5 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 15198:2007-11 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
EN 13763-26 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
EN 137:2006 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing, marking
UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
EN 50016:2002 Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p"
UNI EN ISO 12100-2 : 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 12012-3 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
EN 50241-1 : 99 AMD 1 2004 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
UNI EN 13616 : 2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
UNI EN 12753 : 2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 14492-2 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
UNI EN 1710 : 2008 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNI EN 14492-1 : 2009 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
UNI EN 12921-3 : 2009 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
EN 50281-1-1 : 98 AMD 1 2002 ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING
UNI EN 13135-1 : 2010 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
02/564413 DC : DRAFT OCT 2002 PREN 14583 - WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS
03/300203 DC : DRAFT FEB 2003 EN 50394-1 - ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GROUP 1: INTRINSICALLY SAFE SYSTEMS - PART 1: CONSTRUCTION AND TESTING
DIN EN 50014 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
I.S. EN 12941:1998 RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
DIN EN 50241-1 : 2000 AMD 1 2004 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 13616:2004 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
03/300200 DC : DRAFT JAN 2003 CENELEC TR 50404 - ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
99/711217 DC : DRAFT JUL 1999 EN 13638 - NGV FILLING STATIONS
BS EN 60947-5-6:2001 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements DC interface for proximity sensors and switching amplifiers (NAMUR) - DC interface for proximity sensors and switching amplifiers (NAMUR)
DIN EN 50284 : 2000 SPECIAL REQUIREMENTS FOR CONSTRUCTION, TEST AND MARKING OF ELECTRICAL APPARATUS OF EQUIPMENT GROUP II, CATEGORY 1 G
04/19986707 DC : 0 BS EN 1804-4 - MACHINES FOR UNDERGROUND MINES - SAFETY REQUIREMENTS FOR HYDRAULIC POWERED ROOF SUPPORTS - PART 4: ELECTRO-HYDRAULIC CONTROL SYSTEMS
09/30182347 DC : 0 BS EN 12621:2006/A1 - MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
94/713480 DC : DRAFT NOV 1994 PREN 1710 - MACHINES FOR UNDERGROUND MINES - REQUIREMENTS FOR APPLICATIONS IN AREAS OF MINES WITH FIREDAMP HAZARD - SAFETY REQUIREMENTS
97/720420 DC : DRAFT DEC 1997 EN 1009-4 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SIZING AND SORTING MACHINERY
04/30078214 DC : DRAFT AUG 2004 IEC 61577-1 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 1: GENERAL PRINCIPLES
DIN EN 50021 : 2000 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N"
UNI CEI EN 45510-2-7 : 2011 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
CEI CLC/TR 50427 : 2005 ASSESSMENT OF INADVERTENT IGNITION OF FLAMMABLE ATMOSPHERES BY RADIO-FREQUENCY RADIATION - GUIDE
I.S. EN 50033:1992 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
I.S. EN 61784-5-3:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
I.S. EN 50381:2004 TRANSPORTABLE VENTILATED ROOMS WITH OR WITHOUT AN INTERNAL SOURCE OF RELEASE
DIN EN 12261:2007-07 GAS METERS - TURBINE GAS METERS
DD ENV 14236:2002 Ultrasonic domestic gas meters
I.S. CLC/TR 50404:2006 ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY
PREN 13852 : DRAFT 2000 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
I.S. EN 50016:2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - PRESSURIZED APPARATUS "P"
BS EN 14593-1:2005 Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking
DIN EN 764-7:2002-09 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
BS EN 764-7:2002 Pressure equipment Safety systems for unfired pressure vessels
BS EN 13135-1 : 2003 CRANES - EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
97/204928 DC : DRAFT APR 1997 PREN 50273 - INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES
ISO 8230-3:2008 Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents
BS EN 1474:1997 Installation and equipment for liquefied natural gas. Design and testing of loading/unloading arms
BS EN 1834-1:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group II engines for use in flammable gas and vapour atmospheres
BS EN 61784-5-3:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3
BS EN 12499:2003 Internal cathodic protection of metallic structures
BS EN 12012-3 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
BS EN 14492-1 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 145:1998 Respiratory protective devices. Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type. Requirements, testing, marking
BS EN 1710 : 2005 EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
BS EN 12405:2002 Gas meters. Gas-volume electronic conversion devices
BS EN 1834-2:2000 Reciprocating internal combustion engines. Safety requirements for design and construction of engines for use in potentially explosive atmospheres Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
BS EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
EN 50284:1999 Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1 G
EN 1474 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
EN 1834-1:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 1: Group II engines for use in flammable gas and vapour atmospheres
EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)
EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
EN 14435:2004 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking
EN 45510-2-7:2002 Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear
EN 13636:2004 Cathodic protection of buried metallic tanks and related piping
EN 1834-2:2000 Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
EN 1532 : 1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
BS EN 12261:2002 Gas meters. Turbine gas meters
BS EN ISO 8230-3:2008 Safety requirements for dry-cleaning machines Machines using combustible solvents
BS 5345-4:1977 Code of practice for selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufacture) Installation and maintenance requirements for electrical apparatus with type of protection \'i\'. Intrinsically safe electrical apparatus and systems
I.S. EN ISO 12100-2:2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ONORM EN 14593-1 : 2005 RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING
I.S. EN 1474:1998 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF LOADING/UNLOADING ARMS
I.S. EN 1532:1997 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP TO SHORE INTERFACE
03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
BS EN 50073:1999 Guide for selection, installation, use and maintenance of apparatus for the detection and measurement of combustible gases or oxygen
BS EN 50284:1999 Special requirements for construction, test and marking of electrical apparatus of equipment group II, category 1 G
CEI EN 60947-5-6 : 2000 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
02/207214 DC : DRAFT JULY 2002 PREN 12499 - INTERNAL CATHODIC PROTECTION OF METALLIC STRUCTURES
05/30135286 DC : 0 EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES
93/703129 DC : 0 FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY REQUIREMENTS
BS EN 50017:1998 Electrical apparatus for potentially explosive atmospheres. Powder filling \'q\'
PD CLC/TR 50404:2003 Electrostatics. Code of practice for the avoidance of hazards due to static electricity
BS EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
CEI EN 61784-5-3 : 2014 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
DIN EN 50018 : 2001 AMD 1 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
I.S. 231:1979 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
I.S. EN ISO 8230-3:2008 SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
ANSI/ISO 12100-2 : 2007 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
I.S. HD 637:1999 POWER INSTALLATIONS EXCEEDING 1 KV A.C.
I.S. EN 50019:2001 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
I.S. EN 50241-1:1999 SPECIFICATION FOR OPEN PATH APPARATUS FOR THE DETECTION OF COMBUSTIBLE OR TOXIC GASES AND VAPOURS - GENERAL REQUIREMENTS AND TEST METHODS
NF EN 12312-5 : 2005 + A1 2010 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 14492-2:2016-08 (Draft) CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
DIN EN 14492-1:2015-05 (Draft) Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015
BS EN 13852-2:2004 Cranes. Offshore cranes Floating cranes
BS EN 14435:2004 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only. Requirements, testing, marking
BS EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
BS EN 14583:2004 Workplace atmospheres. Volumetric bioaerosol sampling devices. Requirements and test methods
BS EN 12012-2 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
BS EN 137:2006 Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with full face mask. Requirements, testing, marking
BS EN 14492-2 : 2006 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN 13135-1:2003+A1:2010 Cranes - Equipment - Part 1: Electrotechnical equipment
EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
CEN/TS 13763-27 : 2003 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 27: DEFINITIONS, METHODS AND REQUIREMENTS FOR ELECTRONIC INITIATION SYSTEMS
EN 50394-1:2004 Electrical apparatus for potentially explosive atmospheres - Group I - Intrinsically safe systems - Part 1: Construction and testing
DIN EN 14435:2004-10 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only - Requirements, testing, marking
EN 50033 : 1991 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP
DIN EN 14583:2004-12 Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods
EN 50018 : 2000 AMD 1 2002 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D"
EN 50019:2000/corrigendum Apr. 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
I.S. EN 14583:2004 WORKPLACE ATMOSPHERES - VOLUMETRIC BIOAEROSOL SAMPLING DEVICES - REQUIREMENTS AND TEST METHODS
EN 50015:1998 Electrical apparatus for potentially explosive atmospheres - Oil immersion "o"
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
EN 60947-5-6:2000 Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
EN 50017:1998 Electrical apparatus for potentially explosive atmospheres - Powder filling "q"
EN 14583:2004 Workplace atmospheres - Volumetric bioaerosol sampling devices - Requirements and test methods
EN 50227:1997 Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR)
UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
IEC 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
IEC 60317-3:2004+AMD1:2010 CSV Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
EN 50039:1980 Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i'
IEC 60317-7:1990+AMD1:1997+AMD2:1997 CSV Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220
HD 214 : 200S2 RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS
EN 60127-1:2006/A2:2015 MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS
EN 60127-3:2015 Miniature fuses - Part 3: Sub-miniature fuse-links
EN 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
IEC 60317-8:2010 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
EN 50019:2000/corrigendum Apr. 2003 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E"
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
IEC 60127-2:2014 Miniature fuses - Part 2: Cartridge fuse-links
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
HD 566 : 200S1 THERMAL EVALUATION AND CLASSIFICATION OF ELECTRICAL INSULATION
EN 60317-7:1994/A2:1998 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 7: POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 220
EN 60317-3 : 94 AMD 1 98 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 3: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 155
EN 50284:1999 Special requirements for construction, test and marking of electrical apparatus of equipment group II, Category 1 G
EN 60317-8:2010 Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 50014:1997/A2:1999 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS
EN 50303:2000 Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.