EN 558:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
Superseded date
05-03-2022
Superseded by
Published date
15-02-2017
Publisher
Sorry this product is not available in your region.
European Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions and tolerances
Annex A (informative) - Origin of basic series
Annex B (informative) - Relationship between DN and NPS
Bibliography
This European Standard specifies the "face-to-face" (FTF) and "centre-to-face" (CTF) dimensions for PN and Class designated metal valves used in flanged pipe systems.This European Standard covers valves with the following PN, Class and DN values:-PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160; PN 250; PN 320; PN 400;-Class 125; Class 150; Class 250; Class 300; Class 600; Class 900; Class 1 500; Class 2 500;-DN 10; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1050; DN 1 200; DN 1 400; DN 1 600; DN 1 800; DN 2 000.For valves in other shell materials than metal the same FTF and CTF dimensions may be used.For relationship between DN and NPS see Annex B.
| Committee |
CEN/TC 69
|
| DevelopmentNote |
Supersedes EN 558-1 and EN 558-2. (03/2008) Supersedes EN 26554 and PREN 558. (02/2017)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 558:2018 | Identical |
| UNE-EN 558:2008 | Identical |
| UNI EN 558:2017 | Identical |
| ONORM EN 558 : 2017 | Identical |
| UNI EN 558 : 2012 | Identical |
| DIN EN 558:2017-05 | Identical |
| I.S. EN 558:2017 | Identical |
| SN EN 558 : 2017 | Identical |
| NS EN 558 : 2017 | Identical |
| NF EN 558 : 2017 | Identical |
| NBN EN 558 : 2008 + A1 2012 | Identical |
| BS EN 558:2017 | Identical |
| PN EN 558 : 2017 | Identical |
| NEN EN 558 : 2017 | Identical |
| 09/30205886 DC : 0 | BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 1171 : DRAFT 2014 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 11/30243885 DC : 0 | BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| I.S. EN 16722:2015 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH THREADED ENDS |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| 14/30301577 DC : 0 | BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| 12/30250279 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| UNE-EN 13547:2014 | Industrial valves - Copper alloy ball valves |
| I.S. EN 13547:2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| DIN EN 13709:2010-10 | Industrial valves - Steel globe and globe stop and check valves |
| DIN EN 12982:2009-11 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| BS EN 14141:2013 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
| UNE-EN 1983:2014 | Industrial valves - Steel ball valves |
| UNE-EN 16722:2016 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| BS EN 12288:2010 | Industrial valves. Copper alloy gate valves |
| BS EN 1984:2010 | Industrial valves. Steel gate valves |
| I.S. EN 12288:2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| I.S. EN 12982:2009 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| DIN EN 736-3:2008-04 | Valves - Terminology - Part 3: Definition of terms |
| EN 12288:2010 | Industrial valves - Copper alloy gate valves |
| EN 13547:2013 | Industrial valves - Copper alloy ball valves |
| EN 1349:2009 | Industrial process control valves |
| BS EN 1349:2009 | Industrial process control valves |
| PREN 13774 : DRAFT 2011 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| 14/30296044 DC : 0 | BS EN 16722 - INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR VALVES WITH SCREWED ENDS |
| PREN 13789 : DRAFT 2009 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| PREN 13709 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| PREN 1984 : DRAFT 2009 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| DIN EN 12252:2014-07 | LPG equipment and accessories - Equipping of LPG road tankers |
| DIN EN 12288:2010-10 | Industrial valves - Copper alloy gate valves |
| DIN EN 1171:2015-11 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| DIN EN 1984:2010-10 | Industrial valves - Steel gate valves |
| BS EN 12252:2014 | LPG equipment and accessories. Equipping of LPG road tankers |
| UNE-EN 14141:2014 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| UNE-EN 593:2009 | Industrial valves - Metallic butterfly valves |
| BS EN 13709:2002 | Industrial valves. Steel globe and globe stop and check valves |
| I.S. EN 1171:2015 | INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| I.S. EN 13774:2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| I.S. EN 1074-6:2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| I.S. EN 736-3:2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| I.S. EN 1984:2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| DIN EN 1983:2013-12 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 12561-3:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| DIN EN 12252:2000-10 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| I.S. EN 14141:2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| I.S. EN 1983:2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| I.S. EN 1349:2009 | INDUSTRIAL PROCESS CONTROL VALVES |
| I.S. EN 13789:2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| I.S. EN 12252:2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| I.S. EN 13709:2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| UNI EN 1349 : 2010 | INDUSTRIAL PROCESS CONTROL VALVES |
| 08/30184280 DC : DRAFT SEP 2008 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| 09/30205883 DC : 0 | BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| 09/30205880 DC : DRAFT OCT 2009 | BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| 95/709655 DC : DRAFT JUL 1995 | PREN 1983 - INDUSTRIAL STEEL BALL VALVES |
| UNI EN 13547 : 2013 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| DIN EN 1074-6:2009-03 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| DIN EN 14141:2013-08 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 12982 : 2009 | INDUSTRIAL VALVES - END-TO-END AND CENTRE-TO-END DIMENSIONS FOR BUTT WELDING END VALVES |
| UNI EN 1983 : 2013 | INDUSTRIAL VALVES - STEEL BALL VALVES |
| UNI EN 12288 : 2010 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| UNI EN 13774 : 2013 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| UNI EN 13789 : 2010 | INDUSTRIAL VALVES - CAST IRON GLOBE VALVES |
| UNI EN 14141 : 2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 736-3 : 2008 | VALVES - TERMINOLOGY - PART 3: DEFINITION OF TERMS |
| UNI EN 12561-3 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| UNI EN 1984 : 2010 | INDUSTRIAL VALVES - STEEL GATE VALVES |
| BS EN 1171:2015 | Industrial valves. Cast iron gate valves |
| UNI EN 13709 : 2010 | INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
| UNI EN 12252 : 2014 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| UNI EN 1074-6 : 2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| DIN EN 13547:2013-12 | INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
| 09/30205877 DC : 0 | BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
| 14/30282872 DC : 0 | BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS EN 13547:2013 | Industrial valves. Copper alloy ball valves |
| 13/30281067 DC : 0 | BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS EN 16722:2015 | Industrial valves. End-to-end and centre-to-end dimensions for valves with threaded ends |
| 08/30179182 DC : DRAFT MAY 2008 | BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
| PREN 12288 : DRAFT 2009 | INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
| DIN EN 13789:2010-09 | Industrial valves - Cast iron globe valves |
| DIN EN 13774:2013-05 | VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
| BS EN 12561-3:2011 | Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 13789:2002 | Industrial valves. Cast iron globe valves |
| BS EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
| BS EN 12982:2009 | Industrial valves. End-to-end and centre-to-end dimensions for butt welding end valves |
| UNE-EN 1074-6:2011 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| UNE-EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| UNE-EN 12561-3:2012 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN 1983:2013 | Industrial valves. Steel ball valves |
| UNE-EN 12982:2010 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| BS EN 1074-6:2008 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants |
| EN 13774:2013 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| EN 13709:2010 | Industrial valves - Steel globe and globe stop and check valves |
| EN 1983:2013 | Industrial valves - Steel ball valves |
| EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| EN 1984:2010 | Industrial valves - Steel gate valves |
| EN 13789:2010 | Industrial valves - Cast iron globe valves |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN 16722:2015 | Industrial valves - End-to-end and centre-to-end dimensions for valves with threaded ends |
| PREN 12252 : DRAFT 2013 | LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS |
| 10/30234321 DC : DRAFT DEC 2010 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| DIN EN 12561-3:2011-10 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| UNE-EN 1171:2016 | Industrial valves - Cast iron gate valves |
| BS EN 736-3:2008 | Valves. Terminology Definition of terms |
| EN 1074-6:2008 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| EN 1171:2015 | Industrial valves - Cast iron gate valves |
| EN 12252:2014 | LPG equipment and accessories - Equipping of LPG road tankers |
| DIN EN 16722:2015-12 | INDUSTRIAL VALVES - ENDTOEND AND CENTRETOEND DIMENSIONS FOR VALVES WITH THREADED ENDS |
| ISA 75.16 : 1994 | FACE-TO-FACE DIMENSIONS FOR FLANGED GLOBE-STYLE CONTROL VALVE BODIES (ANSI CLASS 900, 1500, AND 2500) |
| EN 26554:1991 | Flanged automatic steam traps - Face-to-face dimensions (ISO 6554:1980) |
| ISA 75.15 : 1994 | FACE-TO-FACE DIMENSIONS FOR BUTTWELD-END GLOBE-STYLE CONTROL VALVES (ANSI CLASSES 150, 300, 600, 900, 1500, AND 2500) |
| NFE 29 377 : 1986 | INDUSTRIAL VALVES - METALLIC WAFER CHECK VALVES WITH ANGULAR DISPLACEMENT OBTURATOR - SPECIFICATIONS |
| API 609 : 2016 | BUTTERFLY VALVES: DOUBLE-FLANGED, LUG- AND WAFER-TYPE |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| NFE 29 305-2 : 1988 | ROBINETTERIE INDUSTRIELLE - APPAREILS DE ROBINETTERIE UTILISES DANS LES TUYAUTERIES A BRIDES - DIMENSIONS FACE A FACE - SERIES FR |
| ISO 5752:1982 | Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions |
| IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| EN 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| ISO 6554:1980 | Flanged automatic steam traps — Face-to-face dimensions |
| API 594 : 2017 | CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING |
| DIN 3202-3:1979-10 | FACE-TO-FACE DIMENSIONS OF WAFER TYPE VALVES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.