Skip to content
Please enter a keyword to search

  • EN 60068-2-64:2008

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE

    Available format(s): 

    Withdrawn date:  01-07-2011

    Language(s): 

    Published date:  12-01-2013

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Requirements for test apparatus
       4.1 General
       4.2 Basic motion
       4.3 Cross-axis motion
       4.4 Mounting
       4.5 Measuring systems
       4.6 Vibration tolerances
       4.7 Control strategy
       4.8 Vibration response investigation
    5 Severities
       5.1 Test frequency range
       5.2 RMS value of acceleration
       5.3 Shape of acceleration spectral density curve
       5.4 Test duration
    6 Preconditioning
    7 Initial measurements and functional performance test
    8 Testing
       8.1 General
       8.2 Initial vibration response investigation
       8.3 Low-level excitation for equalization prior to
           testing
       8.4 Random testing
       8.5 Final vibration response investigation
    9 Recovery
    10 Final measurements and functional performance
    11 Information to be given in the relevant specification
    12 Information to be given in the test report
    Annex A (informative) Standardized test spectra
    Annex B (informative) Guidance
    Annex ZA (normative) Normative references to international
             publications with their corresponding European
             publications
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the adequacy of specimens to resist dynamic loads without unacceptable degradation of its functional and/or structural integrity when subjected to the specified random vibration test requirements.

    General Product Information - (Show below) - (Hide below)

    Committee SR 104
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Withdrawn
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN 50556:2011 Road traffic signal systems
    CEI EN 60601-1-11 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    ISO 14708-1:2014 Implants for surgery Active implantable medical devices Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
    PREN 1808 : DRAFT 2011 SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
    UNE-EN 61373:2011 Railway applications - Rolling stock equipment - Shock and vibration tests
    14/30266573 DC : 0 BS EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
    I.S. EN 61373:2010 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS
    CEI EN 60068-2-57 : 2014 ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME HISTORY AND SINE-BEAT METHOD
    BS EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
    EN 50556:2011 Road traffic signal systems
    PREN 12368 : DRAFT 2014 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
    BS EN 60601-1-12:2015 (published 2015-06) Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
    BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
    BS EN 60068-2-47:2005 ENVIRONMENTAL TESTING - PART 2-47: TESTS - MOUNTING OF SPECIMENS FOR VIBRATION, IMPACT AND SIMILAR DYNAMIC TESTS
    BS EN 12966:2014 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
    BS EN 60068-2-57:2013 ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD
    CEI EN 61753-101-3 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    PREN 12405-3 : DRAFT 2013 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    CEI EN 50512 : 2014 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
    DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
    I.S. EN 60068-2-55:2013 ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE (IEC 60068-2-55:2013 (EQV))
    PREN 2591-403 : 200P2 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION
    I.S. EN 61163-1:2006 RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
    I.S. EN 62575-1:2016 RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    17/30358367 DC : 0 BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS
    NF EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    I.S. EN 60068-2-57:2013 ENVIRONMENTAL TESTING - PART 2-57: TESTS - TEST FF: VIBRATION - TIME-HISTORY AND SINE-BEAT METHOD (IEC 60068-2-57:2013 (EQV))
    I.S. EN 50249:2002 ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY
    I.S. EN 45502-2-2:2008 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS)
    I.S. EN 60068-2-81:2003 ENVIRONMENTAL TESTING - PART 2-81: TESTS - TEST EI: SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS
    I.S. EN 50512:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
    DIN EN 12368:2015-09 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
    DIN EN 13763-26:2004-11 Explosives for civil uses - Detonators and relays - Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004
    BS EN 12966-1 : 2005 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
    BS EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    UNE-EN 12645:2015 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    BS EN 12645:2014 (published 2014-08) Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing
    BS EN 13763-26:2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
    BS EN 280 : 2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    CEN/TS 14507-1:2003 Inhalational nitric oxide systems - Part 1: Delivery systems
    DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
    EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion
    EN 61019-1 : 2005 Surface acoustic wave (SAW) resonators - Part 1: Generic specification
    EN 12368:2015 Traffic control equipment - Signal heads
    EN 60068-2-81:2003 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
    DIN EN ISO 21649:2010-01 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    EN 12645:2014 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
    EN 60068-2-47:2005 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
    EN 61753-101-3:2008 Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for Category U - Uncontrolled environment
    EN 62878-1-1:2015 Device embedded substrate - Part 1-1: Generic specification - Test methods
    EN 61163-1 : 2006 RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
    EN 12966-1:2005+A1:2009 Road vertical signs - Variable message traffic signs - Part 1: Product standard
    HD 638 S1:2001/A1:2006 ROAD TRAFFIC SIGNAL SYSTEMS
    EN 13557:2003+A2:2008 Cranes - Controls and control stations
    BS EN 50556:2011 ROAD TRAFFIC SIGNAL SYSTEMS
    BS EN 16084:2011 Refrigerating systems and heat pumps. Qualification of tightness of components and joints
    PREN 12405-1 : DRAFT 2017 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    BS EN 62660-2:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles Reliability and abuse testing
    BS EN 61753-101-3:2009 Fibre optic interconnecting devices and passive components performance standard Fibre management systems for category U. Uncontrolled environment
    DD CEN/TS 14507-1:2003 INHALATIONAL NITRIC OXIDE SYSTEMS - PART 1: DELIVERY SYSTEMS
    I.S. EN 16084:2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
    BS EN 62878-1-1:2015 DEVICE EMBEDDED SUBSTRATE - PART 1-1: GENERIC SPECIFICATION - TEST METHODS
    13/30275356 DC : 0 BS EN 12966 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
    BS EN 80601-2-30 : 2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
    13/30276231 DC : 0 BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    11/30234386 DC : 0 BS EN 1808 - SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA AND CONSTRUCTION - EXAMINATIONS AND TESTS
    BS EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality Generic specification
    BS EN 45502-2-3:2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    CEI EN 61373 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS
    CEI EN 50249 : 2003 ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY
    BS EN 45502-2-1:2003 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT BRADYARRHYTHMIA (CARDIAC PACEMAKERS)
    05/30099720 DC : DRAFT AUG 2005 EN 12368 - TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
    06/30106983 DC : 0 EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS OF MEDICAL DEVICES USED IN AIR AMBULANCES
    BS EN 60068-2-55:2013 ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE - LOOSE CARGO TESTING INCLUDING BOUNCE
    I.S. EN 12966:2014 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
    UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
    DIN EN 16084:2011-07 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
    UNI EN 15964 : 2011 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    I.S. EN 61019-1:2005 SURFACE ACOUSTIC WAVE (SAW) RESONATORS - PART 1: GENERIC SPECIFICATION
    I.S. EN 16704-2-1:2016 RAILWAY APPLICATIONS - TRACK - SAFETY PROTECTION ON THE TRACK DURING WORK - PART 2-1: COMMON SOLUTIONS AND TECHNOLOGIES - TECHNICAL REQUIREMENTS FOR TRACK WARNING SYSTEMS (TWS)
    EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
    I.S. EN 62759-1:2015 PHOTOVOLTAIC (PV) MODULES - TRANSPORTATION TESTING - PART 1: TRANSPORTATION AND SHIPPING OF MODULE PACKAGE UNITS
    UNE-EN 12966:2015 Road vertical signs - Variable message traffic signs
    NF EN 15964 : 2011 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    I.S. EN 60368-1:2000 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    EN 2591-403:2012 Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration
    DIN EN 12645:2015-02 Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing
    BS EN 45502-1:2015 Implants for surgery. Active implantable medical devices General requirements for safety, marking and for information to be provided by the manufacturer
    BS EN 14154-3 : 2005 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
    BS EN 12368:2015 Traffic control equipment. Signal heads
    UNE-EN 62759-1:2016 Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
    I.S. EN ISO 15197:2015 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013)
    I.S. EN 12368:2015 TRAFFIC CONTROL EQUIPMENT - SIGNAL HEADS
    I.S. EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    I.S. EN 12645:2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    I.S. EN 13557:2003 CRANES - CONTROLS AND CONTROL STATIONS
    DIN EN 1789:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN 45502-1:2015 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    I.S. EN 280:2013 MOBILE ELEVATING WORK PLATFORMS - DESIGN CALCULATIONS - STABILITY CRITERIA - CONSTRUCTION - SAFETY - EXAMINATIONS AND TESTS
    EN 45502-2-2 : 2008 COR 2009 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS)
    CEI EN 60512-6-5 : 2001 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS PART 6: DYNAMIC STRESS TESTS SECTION 5: TEST 6E: RANDOM VIBRATION
    10/30217405 DC : 0 BS EN 50556 - ROAD TRAFFIC SIGNAL SYSTEMS
    13/30289289 DC : 0 BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 50249:2002 ELECTROMAGNETIC LOCATORS FOR BURIED PIPES AND CABLES - PERFORMANCE AND SAFETY
    08/30191609 DC : DRAFT DEC 2008 BS ISO 14708-6 - IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 6: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDING IMPLANTABLE DEFIBRILLATORS)
    BS EN 50512:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
    I.S. CEN/TS 14507-1:2003 INHALATIONAL NITRIC OXIDE SYSTEMS - PART 1: DELIVERY SYSTEMS
    UNE-EN 50512:2011 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
    08/30181001 DC : DRAFT APR 2008 BS EN 50512 - ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES - ADVANCED VISUAL DOCKING GUIDANCE SYSTEMS (A-VDGS)
    CEI EN 62660-2 : 2014 SECONDARY LITHIUM-ION CELLS FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PART 2: RELIABILITY AND ABUSE TESTING
    EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
    UNI EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    BS EN 61019-1:2005 Surface acoustic wave (SAW) resonators Generic specification
    09/30199518 DC : DRAFT FEB 2009 BS EN 2591-403 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION
    CEI EN 60368-1 : 2006 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    CEI EN 61587-1 : 2012 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
    PREN 12966 : DRAFT 2013 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
    BS EN 60368-1:2000 Piezoelectric filters Generic specification
    CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
    BS EN 45502-2-2:2008 Active implantable medical devices Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)
    I.S. EN 61643-11:2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS
    I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
    I.S. EN 80601-2-30:2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
    I.S. EN 60601-1-12:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
    I.S. EN 60068-2-80:2005 ENVIRONMENTAL TESTING - PART 2-80: TESTS - TEST FI: VIBRATION - MIXED MODE
    CEI EN 61643-11 : 2014 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
    UNE-EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
    NF EN 50556 : 2011 ROAD TRAFFIC SIGNAL SYSTEMS
    CEI EN 61753-101-2 : 2007 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
    UNI EN 2591-403 : 2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION
    I.S. EN 61587-1:2017 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
    DIN EN 1808:2015-08 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    UNE-EN 50491-2:2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
    DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    BS EN ISO 21649:2009 Needle-free injectors for medical use. Requirements and test methods
    ISO 15197:2013 In vitro diagnostic test systems Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
    BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
    ISO 21649:2006 Needle-free injectors for medical use — Requirements and test methods
    I.S. EN 1789:2007 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    EN 1789:2007+A2:2014 Medical vehicles and their equipment - Road ambulances
    UNE-EN 14154-3:2005 Water meters - Part 3 : Test methods and equipment
    UNE-EN 14154-2:2005 Water meters - Part 2 : Installation and conditions of use
    EN 60601-1-12:2015 Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
    EN 13763-26 : 2004 EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 26: DEFINITIONS, METHODS AND REQUIREMENTS FOR DEVICES AND ACCESSORIES FOR RELIABLE AND SAFE FUNCTION OF DETONATORS AND RELAYS
    UNI EN 13557 : 2008 CRANES - CONTROLS AND CONTROL STATIONS
    EN 45502-1:2015 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    UNI EN 12645 : 2014 TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING
    UNI EN 14154-3 : 2011 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
    UNI EN 14154-2 : 2011 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
    UNI CEI EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    BS EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification
    CEI EN 60068-2-55 : 2014 ENVIRONMENTAL TESTING - PART 2-55: TESTS - TEST EE AND GUIDANCE: LOOSE CARGO TESTING INCLUDING BOUNCE
    BS EN 61373:2010 Railway applications. Rolling stock equipment. Shock and vibration tests
    EN 62689-1:2016 Current and voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and requirements
    BS EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 60068-3-8:2003 (published 2004-02) Environmental testing Supporting documentation and guidance - Selecting amongst vibration tests
    BS EN 16704-2-1:2016 Railway applications. Track. Safety protection on the track during work Common solutions and technologies. Technical requirements for Track Warning Systems (TWS)
    I.S. EN 61753-101-3:2008 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-3: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY U - UNCONTROLLED ENVIRONMENT
    13/30233325 DC : 0 BS EN 45502-1 - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    BS EN 2591-403:2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION
    09/30185062 DC : 0 BS EN 12966-1:2006/A1 - ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
    CEI UNI EN 12966-1 : 2010 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: - PRODUCT STANDARD
    BS EN 12405-2:2012 Gas meters. Conversion devices Energy conversion
    BS EN 62689-1:2016 (published 2017-01) Current and voltage sensors or detectors, to be used for fault passage indication purposes General principles and requirements
    DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    BS EN 15964:2011 Breath alcohol test devices other than single use devices. Requirements and test methods
    BS EN 60068-2-80:2005 Environmental testing Tests - Test Fi: Vibration. Mixed mode
    NF EN 16084 : 2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
    UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods
    UNI EN 16084 : 2011 REFRIGERATING SYSTEMS AND HEAT PUMPS - QUALIFICATION OF TIGHTNESS OF COMPONENTS AND JOINTS
    I.S. EN 60068-3-8:2003 ENVIRONMENTAL TESTING - PART 3-8: SUPPORTING DOCUMENTATION AND GUIDANCE - SELECTING AMONGST VIBRATION TESTS
    UNI CEI EN 12966-1 : 2010 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
    I.S. EN 12405-2:2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    I.S. EN 62660-2:2011 SECONDARY LITHIUM-ION CELLS FOR THE PROPULSION OF ELECTRIC ROAD VEHICLES - PART 2: RELIABILITY AND ABUSE TESTING
    ANSI/AAMI/ISO 14708-1:2014 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    I.S. EN 62689-1:2016 CURRENT AND VOLTAGE SENSORS OR DETECTORS, TO BE USED FOR FAULT PASSAGE INDICATION PURPOSES - PART 1: GENERAL PRINCIPLES AND REQUIREMENTS
    BS EN 61587-1:2017 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    I.S. EN 60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    DIN EN 12966:2015-03 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
    CEI EN 50556 : 2012 ROAD TRAFFIC SIGNAL SYSTEMS
    CEI EN 61810-7 : 2006 ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES
    UNE-EN 280:2014 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
    DIN EN ISO 21649 E : 2010 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    DIN EN 280:2016-04 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests (includes Amendment A1:2015)
    EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
    EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
    BS EN 1789 : 2007 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
    UNE-EN 1789:2007 Medical vehicles and their equipment - Road ambulances
    BS EN 1808:2015 SAFETY REQUIREMENTS FOR SUSPENDED ACCESS EQUIPMENT - DESIGN CALCULATIONS, STABILITY CRITERIA, CONSTRUCTION - EXAMINATIONS AND TESTS
    UNE-EN 45502-2-3:2010 Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
    BS EN 50491-2 : 2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    UNE-EN 12368:2015 Traffic control equipment - Signal heads
    EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
    EN 1808:2015 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
    EN 14154-2:2005+A2:2011 Water meters - Part 2: Installation and conditions of use
    EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
    EN ISO 21649:2009 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
    EN 45502-2-1:2004 Active implantable medical devices - Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers)
    EN 45502-2-3:2010 Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
    EN 16704-2-1:2016 Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
    EN 16084:2011 Refrigerating systems and heat pumps - Qualification of tightness of components and joints
    EN 14154-3:2005+A2:2011 Water meters - Part 3: Test methods and equipment
    EN 280:2013+A1:2015 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
    BS EN 60601-1-11:2015 (published 2015-06) Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    EN 61587-1:2017 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
    PREN 45502-1 : DRAFT 2013 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    I.S. EN 50491-2:2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    14/30289772 DC : 0 BS EN 1789:2007+A1:2010/A2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES
    CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
    13/30288325 DC : 0 BS EN 2591-403 - AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION
    BS EN 61753-101-2:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    BS EN 61163-1:2006 RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS
    UNE-EN 16704-2-1:2017 Railway applications - Track - Safety protection on the track during work - Part 2-1: Common solutions and technologies - Technical requirements for Track Warning Systems (TWS)
    BS EN 62759-1:2015 Photovoltaic (PV) modules. Transportation testing Transportation and shipping of module package units
    I.S. EN 50556:2011 ROAD TRAFFIC SIGNAL SYSTEMS
    BS EN 60068-2-53:2010 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
    DIN EN 12405-2:2012-10 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
    UNE-EN 60068-2-53:2011 Environmental testing -- Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
    16/30316718 DC : 0 BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    BS 7987(2001) : 2001 ROAD TRAFFIC SIGNAL SYSTEMS
    BS EN 61643-11 : 2012 LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS
    PREN 50556 : DRAFT 2010 ROAD TRAFFIC SIGNAL SYSTEMS
    16/30312315 DC : 0 BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    BS EN 60068-2-81:2003 ENVIRONMENTAL TESTING - TEST METHODS - TEST EI - SHOCK - SHOCK RESPONSE SPECTRUM SYNTHESIS
    UNE-EN 12405-2:2013 Gas meters - Conversion devices - Part 2: Energy conversion
    I.S. EN 62604-1:2015 SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    I.S. EN 2591-403:2012 AEROSPACE SERIES - ELEMENTS OF ELECTRICAL AND OPTICAL CONNECTION - TEST METHODS - PART 403: SINUSOIDAL AND RANDOM VIBRATION
    EN 60601-1-11:2015 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    I.S. EN 61753-101-2:2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    I.S. EN 60862-1:2015 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    I.S. EN 45502-2-3:2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
    NF EN 50491-2 : 2011 AMD 1 2017 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    17/30356731 DC : 0 BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
    UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
    I.S. EN 15964:2011 BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS
    I.S. EN 60068-2-53:2010 ENVIRONMENTAL TESTING - PART 2-53: TESTS AND GUIDANCE: COMBINED CLIMATIC (TEMPERATURE/HUMIDITY) AND DYNAMIC (VIBRATION/SHOCK) TESTS
    I.S. EN 45502-2-1:2004 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-1: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT BRADYARRHYTHMIA (CARDIAC PACEMAKERS)
    DIN EN 13557:2009-07 CRANES - CONTROLS AND CONTROL STATIONS
    UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
    BS EN 13557 : 2003 CRANES - CONTROLS AND CONTROL STATIONS
    UNE-EN 1808:2016 Safety requirements for suspended access equipment - Design calculations, stability criteria, construction - Examinations and tests
    DIN EN 14154-3:2011-06 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
    EN 45502-1 : 2015 IMPLANTS FOR SURGERY - ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND FOR INFORMATION TO BE PROVIDED BY THE MANUFACTURER
    EN 12966:2014 Road vertical signs - Variable message traffic signs
    EN 62759-1:2015 Photovoltaic (PV) modules - Transportation testing - Part 1: Transportation and shipping of module package units
    EN 60068-2-57:2013 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method
    EN 80601-2-30:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS (IEC 80601-2-30:2009/A1:2013)
    EN 61753-101-2 : 2006 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD - PART 101-2: FIBRE MANAGEMENT SYSTEMS FOR CATEGORY C - CONTROLLED ENVIRONMENT
    EN 45502-2-2 : 2008 COR 2009 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-2: PARTICULAR REQUIREMENTS FOR ACTIVE IMPLANTABLE MEDICAL DEVICES INTENDED TO TREAT TACHYARRHYTHMIA (INCLUDES IMPLANTABLE DEFIBRILLATORS)
    EN 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
    EN 60068-2-80:2005 Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode
    EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
    EN 62660-2:2011 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 2: Reliability and abuse testing
    EN 60368-1:2000/A1:2004 PIEZOELECTRIC FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
    EN 50512:2009 Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)
    EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
    EN 50491-2 : 2010 AMD 1 2015 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    EN 60068-2-53:2010 Environmental testing - Part 2-53: Tests and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests
    DIN EN 12966-1:2010-03 ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS - PART 1: PRODUCT STANDARD
    EN 50249:2002 Electromagnetic locators for buried pipes and cables - Performance and safety
    EN 60068-3-8:2003 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
    UNI EN 1789 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
    IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
    EN 300 019-2-3 : 2.4.1 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 2-3: SPECIFICATION OF ENVIRONMENTAL TESTS; STATIONARY USE AT WEATHERPROTECTED LOCATIONS
    IEC 60068-5-2:1990 Environmental testing - Part 5-2: Guide to drafting of test methods - Terms and definitions
    MIL STD 810 : G ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
    EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
    EN 60068-1:2014 Environmental testing - Part 1: General and guidance
    EN 60068-3-8:2003 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
    ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
    IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
    IEC 60068-3-8:2003 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests
    IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
    ENV 13005 : DRAFT 1999 GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT
    EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
    IEC 60050-300:2001 International Electrotechnical Vocabulary (IEV) - Part 300: Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument
    EN 300 019-2-7 : 3.0.1 ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 2-7: SPECIFICATION OF ENVIRONMENTAL TESTS; PORTABLE AND NON-STATIONARY USE
    EN 60068-5-2:1999 Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions
    EN 60068-2-47:2005 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective