• EN 60455-2:2015

    Current The latest, up-to-date edition.

    RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST

    Available format(s): 

    Language(s): 

    Published date:  20-11-2015

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General notes on methods of test
    5 Methods of test for reactive compounds and
      their components
    6 Methods of test for cured reactive compounds
    Annex A (informative) - Health and safety
    Bibliography
    Annex ZA (normative) - Normative references to
             international publications with their
             corresponding European publications

    Abstract - (Show below) - (Hide below)

    IEC 60455-2:2015(E) specifies methods of test to be used for testing resin based reactive compounds, their components and cured compounds used for electrical insulation.

    General Product Information - (Show below) - (Hide below)

    Committee SR 15
    Development Note Supersedes HD 307.2. (06/2005)
    Document Type Test Method
    Publisher European Committee for Standards - Electrical
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60455-3-4:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS
    BS EN 60455-3-2:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS
    BS EN 60455-3-5:2006 Resin based reactive compounds used for electrical insulation Specifications for individual materials - Unsaturated polyester based impregnating resins
    CEI EN 60455-3-1 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS
    EN 60455-3-8 : 2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013)
    I.S. EN 50655-1:2017 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
    EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
    EN 50655-1:2017 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
    EN 60455-3-5:2006 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS
    EN 60455-3-3 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS
    EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST (IEC 61086-2:2004)
    PREN 50655-1 : DRAFT 2015 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
    BS EN 50655-1:2017 Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds
    CEI EN 60455-3-8 : 2014 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
    CEI EN 60455-3-4 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS
    15/30325650 DC : 0 BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
    BS EN 60455-3-8:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
    I.S. EN 61086-2:2004 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
    BS EN 61086-2:2004 Coatings for loaded printed wire boards (conformal coatings) Methods of test
    CEI EN 60455-3-3 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS
    I.S. EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013 (EQV))
    CEI EN 61086-2 : 2005 COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 2: METHODS OF TEST
    I.S. EN 60455-3-1:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS
    BS EN 60455-3-1:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS
    BS EN 60455-3-3:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS
    BS EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES
    I.S. EN 60455-3-5:2006 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS
    CEI EN 60243-1 : 2014 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES
    I.S. EN 60455-3-3:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 3: UNFILLED POLYURETHANE COMPOUNDS
    I.S. EN 60455-3-2:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS
    I.S. EN 60455-3-4:2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS
    CEI EN 60455-3-2 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS
    I.S. EN 60455-3-8:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
    CEI EN 60455-3-5 : 2006 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS
    EN 60455-3-4 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 4: FILLED POLYURETHANE COMPOUNDS
    EN 60455-3-2 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: QUARTZ FILLED EPOXY RESINOUS COMPOUNDS
    EN 60455-3-1 : 2003 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: UNFILLED EPOXY RESINOUS COMPOUNDS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
    EN ISO 14896 : 2009 PLASTICS - POLYURETHANE RAW MATERIALS - DETERMINATION OF ISOCYANATE CONTENT
    IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
    ISO 2535:2001 Plastics Unsaturated-polyester resins Measurement of gel time at ambient temperature
    ISO 2578:1993 Plastics Determination of time-temperature limits after prolonged exposure to heat
    EN ISO 62 : 2008 PLASTICS - DETERMINATION OF WATER ABSORPTION
    ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value
    ISO 7056:1981 Plastics laboratory ware Beakers
    ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
    ISO 3451-1:2008 Plastics Determination of ash Part 1: General methods
    EN ISO 2114:2000/AC:2005 PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
    IEC 60250:1969 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
    EN ISO 9396 : 2000 PLASTICS - PHENOLIC RESINS - DETERMINATION OF THE GEL TIME AT A GIVEN TEMPERATURE USING AUTOMATIC APPARATUS
    EN ISO 2431:2011 PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS (ISO 2431:2011)
    ISO 3219:1993 Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
    IEC 60455-1:1998 Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements
    ISO 11359-3:2002 Plastics Thermomechanical analysis (TMA) Part 3: Determination of penetration temperature
    ISO 3001:1999 Plastics Epoxy compounds Determination of epoxy equivalent
    ISO 4895:2014 Plastics Liquid epoxy resins Determination of tendency to crystallize
    EN ISO 2578 : 1998 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT
    ISO 2039-1:2001 Plastics Determination of hardness Part 1: Ball indentation method
    IEC 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
    EN 61099:2010 INSULATING LIQUIDS - SPECIFICATIONS FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES
    EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
    EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)
    EN ISO 604 : 2003 PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
    ISO 11359-2:1999 Plastics Thermomechanical analysis (TMA) Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
    EN 22592 : 1993 PETROLEUM PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
    EN ISO 179-1:2010 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST
    IEC 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
    EN 60814 : 1997 INSULATING LIQUIDS - OIL-IMPREGNATED PAPER AND PRESSBOARD - DETERMINATION OF WATER BY AUTOMATIC COULOMETRIC KARL FISCHER TITRATION
    ISO 14896:2009 Plastics Polyurethane raw materials Determination of isocyanate content
    EN 60455-3-8 : 2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013)
    ISO 4583:1998 Plastics Epoxy resins and related materials Determination of easily saponifiable chlorine
    ISO 11357-2:2013 Plastics Differential scanning calorimetry (DSC) Part 2: Determination of glass transition temperature and glass transition step height
    ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
    HD 429 : 200S1 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
    ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
    ISO 1523:2002 Determination of flash point Closed cup equilibrium method
    ISO 4615:1979 Plastics Unsaturated polyesters and epoxide resins Determination of total chlorine content
    ISO 2555:1989 Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method
    IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
    EN ISO 3521 : 1999 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997)
    EN ISO 1513 : 2010 PAINTS AND VARNISHES - EXAMINATION AND PREPARATION OF TEST SAMPLES (ISO 1513:2010)
    EN 61033 : 2006 TEST METHODS FOR THE DETERMINATION OF BOND STRENGTH OF IMPREGNATING AGENTS TO AN ENAMELLED WIRE SUBSTRATE
    IEC 60093:1980 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
    ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value
    ISO 4573:1978 Plastics Epoxide resins and glycidyl esters - Determination of inorganic chlorine (Under revision ISO 11376)
    EN 60296:2012 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED MINERAL INSULATING OILS FOR TRANSFORMERS AND SWITCHGEAR (IEC 60296:2012)
    ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method
    IEC 60068-2-10:2005 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
    ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
    EN ISO 2039-1 : 2003 PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001)
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
    EN ISO 3219 : 1994 PLASTICS - POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOMETER WITH DEFINED SHEAR RATE
    EN ISO 584 : 1997 PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF REACTIVITY AT 80 DEGREE C (CONVENTIONAL METHOD)
    ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
    EN 60426 : 2007 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF ELECTROLYTIC CORROSION CAUSED BY INSULATING MATERIALS - TEST METHODS
    ISO 604:2002 Plastics — Determination of compressive properties
    EN 60243-1:2013 ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
    ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
    ISO 62:2008 Plastics Determination of water absorption
    IEC 60814:1997 Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
    IEC 60426:2007 Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
    ISO 306:2013 Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
    EN ISO 291:2008 PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING
    ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
    ISO 4625:1980 Binders for paints and varnishes Determination of softening point Ring-and-ball method
    EN ISO 2554 : 1999 PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYSROXYL VALUE
    ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
    ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
    EN ISO 868 : 2003 PLASTICS AND EBONITE - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A DUROMETER (SHORE HARDNESS)
    EN 60455-1 : 1998 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS
    EN ISO 179-2:1999/A1:2012 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - INSTRUMENTED IMPACT TEST (ISO 179-2:1997/AMD 1:2011)
    EN ISO 4615 : 1999 Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979)
    IEC 61033:1991 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
    ISO 178:2010 Plastics Determination of flexural properties
    EN ISO 306:2013 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013)
    EN ISO 2535 : 2002 PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT AMBIENT TEMPERATURE (ISO 2535:2001)
    ISO 558:1980 Conditioning and testing Standard atmospheres Definitions
    EN ISO 1183-1:2012 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012)
    EN ISO 175:2010 PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS
    ISO 868:2003 Plastics and ebonite Determination of indentation hardness by means of a durometer (Shore hardness)
    ISO 9396:1997 Plastics — Phenolic resins — Determination of the gel time of resols under specific conditions using automatic apparatus
    EN ISO 1523 : 2002 DETERMINATION OF FLASH POINT - CLOSED CUP EQUILIBRIUM METHOD
    ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective