Skip to content
Please enter a keyword to search

  • EN 60512-2-1:2002

    Current The latest, up-to-date edition.

    Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

    Available format(s): 

    Language(s): 

    Published date:  12-04-2002

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope and object
    2 General measuring requirements
    3 Method of measurement
    4 Measuring cycles
    5 Requirements
    6 Details to be specified

    Abstract - (Show below) - (Hide below)

    Defines a standard test method to measure the electrical resistance across a pair of mated contacts or a contact with a measuring gauge. Measurements may be carried out with direct current or alternating current.

    General Product Information - (Show below) - (Hide below)

    Committee CLC/SR 48B
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN 60068-2-60:1996 Environmental testing. Test methods Test Ke. Flowing mixed gas corrosion test
    BS EN 61076-3-122:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    UNE-EN 60068-2-60:2016 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
    CEI EN 60512-11-3 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS TEST 11C: DAMP HEAT, STEADY STATE
    I.S. EN 60512-9-1:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION
    CEI EN 60512-11-9 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS TEST 11I: DRY HEAT
    I.S. EN 60603-7-4:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
    09/30208429 DC : 0 BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    I.S. EN 60603-7-5:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
    I.S. EN 60512-11-10:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
    CEI EN 60603-7-2 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
    I.S. EN 60512-6-1:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-1: DYNAMIC STRESS TESTS - TEST 6A: ACCELERATION, STEADY STATE
    BS EN 60130-9:2011 Connectors for frequencies below 3 MHz Circular connectors for radio and associated sound equipment
    CEI EN 60512-6-1 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-1: DYNAMIC STRESS TESTS - TEST 6A: ACCELERATION, STEADY STATE
    BS EN 60512-6-3:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6c. Shock
    BS EN 60512-11-12:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11m. Damp heat, cyclic
    UNE-EN 50467:2012 Railway applications - Rolling stock - Electrical connectors, requirements and test methods
    I.S. EN 60603-7-81:2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-81: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
    I.S. EN 60130-9:2011 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    I.S. EN 60512-6-4:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-4: DYNAMIC STRESS TESTS - TEST 6D: VIBRATION (SINUSOIDAL)
    I.S. EN 50467:2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    EN 60603-7-81:2016/AC:2017-07 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-81: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ (IEC 60603-7-81:2015/COR 1:2017)
    EN 60603-7-5:2010 Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    EN 60603-7-2:2010 Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
    EN 60603-7-3:2010 Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
    EN 60603-7-4:2010 Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    EN 60512-11-12 : 2002 Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
    EN 60068-2-42:2003 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
    EN 60603-7-7:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
    EN 60068-2-60:2015 Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test
    EN 60512-11-7:2003 Connectors for electronic equipment - Tests and measurements - Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
    EN 60512-11-10:2002 Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
    EN 60512-11-9:2002 Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
    BS EN 60603-7-3:2010 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
    BS EN 60512-11-10:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11j. Cold
    BS EN 60512-6-1:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6a. Acceleration, steady state
    BS EN 60512-9-5:2010 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9e. Current loading, cyclic
    CEI EN 50467 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    CEI EN 60512-9-1 : 2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-1: ENDURANCE TESTS - TEST 9A: MECHANICAL OPERATION
    PREN 50467 : DRAFT 2009 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    I.S. EN 60512-11-7:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST
    CEI EN 61587-5 : 2014 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS AND PLUG-IN UNITS
    I.S. EN 60512-6-3:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-3: DYNAMIC STRESS TESTS - TEST 6C: SHOCK
    CEI EN 60512-9-3 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    CEI EN 60512-9-2 : 2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE
    CEI EN 60603-7-4 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
    I.S. EN 60512-9-3:2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-3: ENDURANCE TESTS - TEST 9C: MECHANICAL OPERATION (ENGAGING/SEPARATING) WITH ELECTRICAL LOAD
    CEI EN 60068-2-43 : 2004 ENVIRONMENTAL TESTING - PART 2-43: TESTS -TEST KD: HYDROGEN SULPHIDE TEST FOR CONTACTS AND CONNECTIONS
    EN 61076-3-122:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments
    I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    BS EN 60512-11-3:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11c. Damp heat, steady state
    BS EN 60068-2-43:2003 Environmental testing. Test methods Test Kd. Hydrogen sulphide test for contacts and connections
    DD CLC/TS 50467:2008 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
    BS EN 60068-2-42:2003 Environmental testing. Test methods Test Kc. Sulphur dioxide test for contacts and connections
    BS EN 60512-11-7:2003 Connectors for electronic equipment. Tests and measurements Flowing mixed gas corrosion test
    BS EN 60512-9-3:2011 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9c. Mechanical operation (engaging/separating) with electrical load
    CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
    EN IEC 61076-2-111:2018 Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
    I.S. EN 60512-11-12:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-12: CLIMATIC TESTS - TEST 11M: DAMP HEAT, CYCLIC
    I.S. EN 60512-11-9:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-9: CLIMATIC TESTS - TEST 11I: DRY HEAT
    BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
    I.S. EN 60512-9-2:2012 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-2: ENDURANCE TESTS - TEST 9B: ELECTRICAL LOAD AND TEMPERATURE (IEC 60512-9-2:2011 (EQV))
    EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
    I.S. EN 60947-7-4:2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013 (EQV))
    I.S. EN 61076-3-104:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ
    EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
    EN 60603-7-82:2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-82: DETAIL SPECIFICATION FOR 8-WAY, 12 CONTACTS, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 2000 MHZ (IEC 60603-7-82:2016)
    CEI EN 60512-6-2 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-2: DYNAMIC STRESS TESTS TEST 6B: BUMP
    BS EN 60603-7-2:2010 Connectors for electronic equipment Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
    BS EN 61587-5:2014 Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 Seismic tests for chassis, subracks and plug-in units
    CEI EN 60947-7-4 : 2014 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS
    CEI EN 60512-2-3 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 2-3: ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS - TEST 2C: CONTACT RESISTANCE VARIATION
    CEI EN 60603-7-5 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-5: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
    UNE-EN 60947-7-4:2014 Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors
    BS EN 60512-9-2:2012 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9b. Electrical load and temperature
    EN IEC 61076-3-119:2018 Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz
    CEI EN 61076-3-122 : 1ED 2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
    BS EN 60512-9-1:2010 Connectors for electronic equipment. Tests and measurements Endurance tests. Test 9a. Mechanical operation
    BS EN 60603-7-7:2010 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
    BS EN 60512-6-4:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6d. Vibration (sinusoidal)
    I.S. EN 61587-5:2014 MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 - PART 5: SEISMIC TESTS FOR CHASSIS, SUBRACKS AND PLUG-IN UNITS
    I.S. EN 61076-3-122:2017 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-122: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR I/O AND GIGABIT ETHERNET APPLICATIONS IN HARSH ENVIRONMENTS
    S.R. CLC/TS 50467:2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    CEI EN 60068-2-42 : 2004 ENVIRONMENTAL TESTING - PART 2-42: TESTS -TEST KC: SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS
    BS EN 60947-7-4:2013 Low-voltage switchgear and controlgear Ancillary equipment. PCB terminal blocks for copper conductors
    I.S. EN 60068-2-43:2003 ENVIRONMENTAL TESTING - PART 2-43: TESTS - TEST KD: HYDROGEN SULPHIDE TEST FOR CONTACTS AND CONNECTIONS
    CEI EN 60603-7-7 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
    IEC 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
    IEC 60512-6-1:2002 Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
    IEC 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
    IEC 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
    IEC 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
    IEC 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
    EN 60068-2-43:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
    CLC/TS 50467 : 2008 COR 2008 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    CEI EN 60512-11-7 : 2004 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11- 7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST
    CEI EN 60512-11-10 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-10: CLIMATIC TESTS - TEST 11J: COLD
    CEI EN 60512-6-4 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS PART 6-4: DYNAMIC STRESS TESTS TEST 6D: VIBRATION (SINUSOIDAL)
    BS EN 60603-7-81:2016 Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz
    BS EN 60603-7-4:2010 Connectors for electronic equipment Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
    I.S. EN 60512-9-5:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC
    BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
    I.S. EN 60603-7-2:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-2: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
    BS EN 60512-11-9:2002 Connectors for electronic equipment. Tests and measurements. Climatic tests Test 11i. Dry heat
    BS EN 60512-2-3:2002 Connectors for electronic equipment. Tests and measurements. Electrical continuity and contact resistance tests Test 2c. Contact resistance variation
    BS EN 61076-3-104:2017 Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    CEI EN 60512-6-3 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENT - PART 6-3: DYNAMIC STRESS TESTS TEST 6C: SHOCK
    BS EN 60512-6-2:2002 Connectors for electronic equipment. Tests and measurements. Dynamic stress tests Test 6b. Bump
    I.S. EN 60603-7-3:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 100 MHZ
    CEI EN 60512-9-5 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 9-5: ENDURANCE TESTS - TEST 9E: CURRENT LOADING, CYCLIC
    I.S. EN 60068-2-42:2003 ENVIRONMENTAL TESTING - PART 2-42: TESTS - TEST KC: SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS
    CEI EN 60130-9 : 2012 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ - PART 9: CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
    I.S. EN 60512-6-2:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 6-2: DYNAMIC STRESS TESTS - TEST 6B: BUMP
    BS EN 60603-7-82:2016 Connectors for electronic equipment Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz
    I.S. EN IEC 61076-3-119:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-119: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR SHIELDED AND UNSHIELDED, FREE AND FIXED 10-WAY CONNECTORS WITH PUSH-PULL COUPLING FOR INDUSTRIAL ENVIRONMENTS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
    I.S. EN 60512-2-3:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 2-3: ELECTRICAL CONTINUITY AND CONTACT RESISTANCE TESTS - TEST 2C: CONTACT RESISTANCE VARIATION
    CEI EN 60603-7-3 : 2011 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-3: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 100 MHZ
    I.S. EN IEC 61076-2-111:2018 CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 2-111: CIRCULAR CONNECTORS - DETAIL SPECIFICATION FOR POWER CONNECTORS WITH M12 SCREW-LOCKING
    I.S. EN 60603-7-7:2010 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-7: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 600 MHZ
    CEI EN 60512-11-12 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-12: CLIMATIC TESTS - TEST 11M: DAMP HEAT, CYCLIC
    I.S. EN 60068-2-60:2015 ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST
    I.S. EN 60512-11-3:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-3: CLIMATIC TESTS - TEST 11C: DAMP HEAT, STEADY STATE
    EN 61076-3-104:2017 Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz
    EN 60512-6-2:2002 Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
    EN 60130-9:2011 Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
    EN 60603-7-82 : 2016 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-82: DETAIL SPECIFICATION FOR 8-WAY, 12 CONTACTS, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 2000 MHZ (IEC 60603-7-82:2016)
    EN 60512-9-2:2012 Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
    EN 60512-9-1 : 2010 Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
    EN 61587-5:2014 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks and plug-in units
    EN 60512-11-3:2002 Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
    EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
    EN 60512-6-4:2002 Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
    EN 60512-6-1:2002 Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
    EN 60512-6-3:2002 Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
    EN 50467 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
    EN 60947-7-4 : 2013 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-4: ANCILLARY EQUIPMENT - PCB TERMINAL BLOCKS FOR COPPER CONDUCTORS (IEC 60947-7-4:2013)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective