EN 60519-1:2015

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

Available format(s):

Superseded date: 03-02-2022

Language(s):

Published date: 22-05-2015

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope and object
2 Normative references
3 Terms, definitions and abbreviations
4 Classification and sub-division
5 Risk assessment
6 General provisions
7 Protection against electric shock
8 Protection against hazards caused by electric or
   magnetic nearfields
9 Protection against hazards from radiation
10 Protection against hazards from thermal influences
11 Protection against hazards from fire
12 Protection against hazards from fluids
13 Specific requirements for components and subassemblies
14 Control of the installation or equipment
15 Protection against mechanical hazards
16 Protection against hazards resulting from use
17 Protection against other hazards
18 Verification and testing
19 Information for use
Annex A (informative) - List of significant hazards
Annex B (informative) - Electric and magnetic fields,
        touch currents - limits of exposure hazards
Annex C (informative) - Optical radiation - limits of
        exposure hazards
Annex D (informative) - Limits for exposure hazards - noise
        and vibration
Annex E (normative) - Provisions concerning EMC
Annex F (normative) - Marking and warning
Annex G (informative) - Guidelines on using this standard
Annex H (informative) - Connection with ISO 13577 series
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications
Annex ZZ (informative) - Coverage of Essential
         Requirements of EU Directive 2006/42/EC

Abstract - (Show below) - (Hide below)

IEC 60519-1:2015 specifies general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM). This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:a) The title and scope of the standard has been expanded to include installations and equipment for electromagnetic processing of materials.b) Terms and definitions as well as the list of normative references have been updated and completed with new items.c) The requirements have been restructured.d) Additional requirements for electric and magnetic fields, for touch currents as well as for optical radiation have been added.e) New clauses addressing verification have been added.f) New annexes specifying limits of exposure hazards for electric and magnetic fields, optical radiation, noise and vibration have been added.g) New annexes on EMC, markings and warnings, guidelines for using this standard and information on the connection to ISO 13577-1 have been added.

General Product Information - (Show below) - (Hide below)

Committee	CLC/SR 27
Development Note	FORMER HD 491.1. (05/2001)
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Superseded
Superseded By	EN IEC 60519-1:2020
Supersedes	HD 491.1 : 200S1

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
VDE 0721-1 : 2017	Identical
I.S. EN 60519-1:2015	Identical
ONORM OVE EN 60519-1 : 2017	Identical
NBN EN 60519-1 : 2015	Identical
SN EN 60519-1:2015	Identical
SN EN 60519-1 : 2003	Identical
BS EN 60519-1:2015	Identical
DIN EN 60519-1 : 2017	Identical
PN EN 60519-1 : 2015	Identical
CEI EN 60519-1 : 2016	Identical
NF EN 60519-1 : 2015	Identical
IEC 60519-1:2015	Identical
NEN EN IEC 60519-1 : 2015	Identical
UNE-EN 60519-1:2004	Identical
BS ISO 22526-1:2020	Identical
NEN 10519-1 : 1994	Identical
VDE 0721-911 : 1995	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

CEI EN 60519-9 : 2006	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
I.S. EN 62693:2013	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 62693:2013 (EQV))
EN IEC 60519-12:2018	Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating
CEI EN 61922 : 2003	HIGH FREQUENCY INDUCTION HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT OF THE GENERATOR
BS EN 60703:2009	TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
09/30180290 DC : 0	BS EN 1247:2004/A1 - FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
I.S. EN 61922:2002	HIGH-FREQUENCY INDUCTION HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT OF THE GENERATOR
I.S. EN 60519-2:2006	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT
I.S. EN 60398:2015	INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL PERFORMANCE TEST METHODS
CEI EN 62693 : 2014	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS
DIN EN 746-3:2010-02	Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases (includes Amendment A1:2009)
BS EN 60519-11:2007	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS
EN 12753:2005+A1:2010	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
EN 60519-8:2005	Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces
EN 62693:2013	Industrial electroheating installations - Test methods for infrared electroheating installations
EN 62395-2:2013	ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE (IEC 62395-2:2013)
EN 60703:2009	Test methods for electroheating installations with electron guns
EN 60683:2012	Industrial electroheating equipment - Test methods for submerged-arc furnaces
EN 60519-7:2008	Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns
EN 60519-9:2005	Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations
EN 61922:2002	High-frequency induction heating installations - Test methods for the determination of power output of the generator
EN 746-3:1997+A1:2009	Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
CLC/TS 62395-2:2010	Electrical resistance trace heating systems for industrial and commercial applications - Part 2: Application guide for system design, installation and maintenance
EN 12621:2006+A1:2010	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
EN 62395-1:2013	Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements
EN 12757-1:2005+A1:2010	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
EN 60519-6:2011	Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment
EN 62798:2014/AC:2014	INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS (IEC 62798:2014)
I.S. EN 60519-4:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013 (EQV))
CEI EN 62076 : 2007	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INDUCTION CHANNEL AND INDUCTION CRUCIBLE FURNACES
BS EN 62693:2013	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INFRARED ELECTROHEATING INSTALLATIONS
I.S. EN ISO 11111-7:2005	TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY (ISO 11111-7:2005)
CEI EN 60519-10 : 2013	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 10: PARTICULAR REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS
BS EN 60519-8:2005	Safety in electroheat installations Particular requirements for electroslag remelting furnaces
CEI EN 60519-8 : 2006	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 8: PARTICULAR REQUIREMENTS FOR ELECTROSLAG REMELTING FURNACES
CEI EN 60519-4 : 2014	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS
BS EN 60519-12:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS
BS EN 62076:2006	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INDUCTION CHANNEL AND INDUCTION CRUCIBLE FURNACES
BS EN 60683:2012	Industrial electroheating equipment. Test methods for submerged-arc furnaces
CEI EN 60683 : 2012	INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR SUBMERGED ARC FURNACES
BS EN 60519-9:2005	SPECIFICATION FOR SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
I.S. EN 60519-6:2011	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 6: SPECIFICATIONS FOR SAFETY IN INDUSTRIAL MICROWAVE HEATING EQUIPMENT
I.S. EN 60519-8:2005	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 8: PARTICULAR REQUIREMENTS FOR ELECTROSLAG REMELTING FURNACES
I.S. EN 50156-1:2015	ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
I.S. EN 60519-9:2005	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
DIN EN 746-1:2010-02	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment (includes Amendment A1:2009)
DIN EN 12621:2011-07	Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
BS EN 12757-1 : 2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
BS EN 60519-2:2006	Safety in electroheat installations Particular requirements for resistance heating equipment
I.S. EN 12757-1:2005	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
I.S. EN 12621:2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 1539:2016-02	DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 1539:2015	DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
I.S. EN 746-1:1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
I.S. EN 1247:2004	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
OVE/ONORM EN 60519-8 : 2006	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 8: PARTICULAR REQUIREMENTS FOR ELECTROSLAG REMELTING FURNACES
I.S. EN 746-3:1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
I.S. EN 12753:2005	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
S.R. CLC/TS 62395-2:2010	ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE
VDE 0721-211 : 1996	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
BS EN 60519-7:2009	Safety in electroheat installations Particular requirements for installations with electron guns
BS EN 62798:2014	INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR INFRARED EMITTERS
I.S. EN IEC 60519-12:2018	SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING
BS EN 62395-1:2013 (published 2013-12)	Electrical resistance trace heating systems for industrial and commercial applications General and testing requirements
BS EN 60519-6:2011	Safety in electroheat installations Specifications for safety in industrial microwave heating equipment
VDE 0721-321 : 1996	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 9: PARTICULAR REQUIREMENTS FOR HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS
I.S. EN 60519-3:2005	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
CEI EN 60676 : 2012	INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR DIRECT ARC FURNACES
PREN 16985 : DRAFT 2016	SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 1247:2010-12	Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continous casting machines (includes Amendment A1:2010)
BS EN 746-1 : 1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN 746-3 : 1997	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
BS EN ISO 11111-7 : 2005	TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 7: DYEING AND FINISHING MACHINERY (ISO 11111-7:2005)
BS EN 12753 : 2005	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
BS EN 60519-3:2005	Safety in electroheat installations Particular requirements for induction and conduction heating and induction melting installations
UNI EN 746-3 : 2009	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 3: SAFETY REQUIREMENTS FOR THE GENERATION AND USE OF ATMOSPHERE GASES
UNI EN 12757-1 : 2010	MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
UNI EN 12753 : 2010	THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 1247 : 2010	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
BS EN 1247 : 2004	FOUNDRY MACHINERY - SAFETY REQUIREMENTS FOR LADLES, POURING EQUIPMENT, CENTRIFUGAL CASTING MACHINES, CONTINUOUS AND SEMI CONTINUOUS CASTING MACHINES
UNI EN 12621 : 2010	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
UNI EN 746-1 : 2009	INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 1: COMMON SAFETY REQUIREMENTS FOR INDUSTRIAL THERMOPROCESSING EQUIPMENT
BS EN 60676:2012 (published 2012-02)	Industrial electroheating equipment. Test methods for direct arc furnaces
CEI EN 62395-1 : 2014	ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 1: GENERAL AND TESTING REQUIREMENTS
BS EN 61922:2002	HIGH-FREQUENCY INDUCTION HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT OF THE GENERATOR
I.S. EN 60676:2012	INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR DIRECT ARC FURNACES (IEC 60676:2011 (EQV))
CEI EN 60519-12 : 2014	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS
CEI EN 60703 : 2010	TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
16/30335146 DC : 0	BS EN 16985 - SPRAY BOOTHS FOR ORGANIC COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 12753:2011-02	Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
DIN EN 12757-1:2011-02	Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
I.S. EN 62395-1:2013	ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 1: GENERAL AND TESTING REQUIREMENTS
I.S. EN 62076:2006	INDUSTRIAL ELECTROHEATING INSTALLATIONS - TEST METHODS FOR INDUCTION CHANNEL AND INDUCTION CRUCIBLE FURNACES
UNE-EN 12621:2006	Machinery for the supply and circulation of coating materials under pressure - Safety requirements
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 50156-1:2015	Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation
12/30260546 DC : 0	BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION
ISO 11111-7:2005	Textile machinery Safety requirements Part 7: Dyeing and finishing machinery
BS EN 1539:2015	DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
EN 746-1:1997+A1:2009	Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
EN 1539:2015	Dryers and ovens, in which flammable substances are released - Safety requirements
EN ISO 11111-7:2005/A2:2016	Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery - Amendment 2 (ISO 11111-7:2005/Amd 2:2016)
BS EN 60519-4:2013	Safety in electroheating installations Particular requirements for arc furnace installations
I.S. EN 60703:2009	TEST METHODS FOR ELECTROHEATING INSTALLATIONS WITH ELECTRON GUNS
I.S. EN 62395-2:2013	ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS - PART 2: APPLICATION GUIDE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE
CEI EN 60519-7 : 2010	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 7: PARTICULAR REQUIREMENTS FOR INSTALLATIONS WITH ELECTRON GUNS
BS EN 60519-10:2013	Safety in electroheating installations Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
BS EN 60398:2015	Installations for electroheating and electromagnetic processing. General performance test methods
BS EN 62395-2:2013 (published 2013-12)	Electrical resistance trace heating systems for industrial and commercial applications Application guide for system design, installation and maintenance
I.S. EN 60519-12:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 12: PARTICULAR REQUIREMENTS FOR INFRARED ELECTROHEATING INSTALLATIONS (IEC 60519-12:2013 (EQV))
I.S. EN 60683:2012	INDUSTRIAL ELECTROHEATING EQUIPMENT - TEST METHODS FOR SUBMERGED-ARC FURNACES (IEC 60683:2011 (EQV))
I.S. EN 60519-7:2008	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 7: PARTICULAR REQUIREMENTS FOR INSTALLATIONS WITH ELECTRON GUNS
I.S. EN 60519-11:2007	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 11: PARTICULAR REQUIREMENTS FOR INSTALLATIONS USING THE EFFECT OF ELECTROMAGNETIC FORCES ON LIQUID METALS
I.S. EN 60519-10:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 10: PARTICULAR REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING SYSTEMS FOR INDUSTRIAL AND COMMERCIAL APPLICATIONS (IEC 60519-10:2013 (EQV))
DD CLC/TS 62395-2:2010	Electrical resistance trace heating systems for industrial and commercial applications Application guide for system design, installation and maintenance
EN 1247:2004+A1:2010	Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines
EN 62076:2006	Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces
EN 50156-1:2015	Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation
EN 60519-2:2006	SAFETY IN ELECTROHEAT INSTALLATIONS - PART 2: PARTICULAR REQUIREMENTS FOR RESISTANCE HEATING EQUIPMENT
EN 60519-3:2005	Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations
EN 60519-10:2013	Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications
EN 60676:2012	Industrial electroheating equipment - Test methods for direct arc furnaces
EN 60398:2015	Installations for electroheating and electromagnetic processing - General performance test methods
EN 60519-4:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013)
EN 60519-11:2007	Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

Standards Referencing This Book - (Show below) - (Hide below)

ISO 15265:2004	Ergonomics of the thermal environment Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
ISO 13855:2010	Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body
EN 50445:2008	Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
IEC 61672-2:2013+AMD1:2017 CSV	Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests
IEC 60364-5-54:2011	Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
ISO 7010:2011	Graphical symbols Safety colours and safety signs Registered safety signs
IEC 61936-1:2010+AMD1:2014 CSV	Power installations exceeding 1 kV a.c. - Part 1: Common rules
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC TS 60479-1:2005+AMD1:2016 CSV	Effects of current on human beings and livestock - Part 1: Generalaspects
IEC 60228:2004	Conductors of insulated cables
ISO 14119:2013	Safety of machinery Interlocking devices associated with guards Principles for design and selection
IEC 61000-3-11 : 2.0	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-11: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS - EQUIPMENT WITH RATED CURRENT <= 75 A AND SUBJECT TO CONDITIONAL CONNECTION
EN 62311:2008	Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV	Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
ISO 14120:2015	Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
EN 61000-3-11:2000	Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current
EN 61672-2:2013/A1:2017	ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017)
IEC TS 61201:2007	Use of conventional touch voltage limits - Application guide
EN 60335-2-89:2010/A2:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT CONDENSING UNIT OR COMPRESSOR (IEC 60335-2-89:2010/A2:2015, MODIFIED)
HD 60364-4-42 : 2011 AMD 1 2015	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014)
ISO 13732-1:2006	Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 1: Hot surfaces
IEC GUIDE 117:2010	Electrotechnical equipment - Temperatures of touchable hot surfaces
EN 61000-3-3:2013	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION (IEC 61000-3-3:2013)
IEC 61326-3-1 : 2.0	ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS
IEC TS 61000-1-2:2008	Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena
IEC 60204-1:2016	Safety of machinery - Electrical equipment of machines - Part 1: General requirements
IEC 60364-5-53:2001+AMD1:2002+AMD2:2015 CSV	Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control
ISO 13577-2:2014	Industrial furnaces and associated processing equipment Safety Part 2: Combustion and fuel handling systems
HD 60364-4-41:2017/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
HD 60364-5-54:2011/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
EN ISO 13850:2015	Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)
IEC 61786-1:2013	Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
IEC 60204-11:2000	Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60825-1:2014	Safety of laser products - Part 1: Equipment classification and requirements
IEC 60909-0:2016	Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 60228:2005 COR 2005	CONDUCTORS OF INSULATED CABLES
EN 82079-1:2012	Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
EN 60335-2-24:2010	Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
EN ISO 13857:2008	Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
IEC 61082-1:2014 RLV	Preparation of documents used in electrotechnology - Part 1: Rules
ISO 12100:2010	Safety of machinery General principles for design Risk assessment and risk reduction
IEC 60364-1:2005	Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
EN ISO 13732-1:2008	Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
EN 61936-1 : 2010 AMD 1 2014	POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES (IEC 61936-1:2010/A1:2014)
HD 60364-4-442:2012	Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
EN ISO 14159:2008	Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)
EN ISO 13855:2010	Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010)
ISO/IEC Guide 51:2014	Safety aspects Guidelines for their inclusion in standards
IEC 60865-1:2011	Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
ISO 14159:2002	Safety of machinery Hygiene requirements for the design of machinery
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
HD 60364-1:2008/A11:2017	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
EN 61672-1:2013	Electroacoustics - Sound level meters - Part 1: Specifications
EN ISO 3746:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN ISO 5349-1 : 2001	MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
EN 55011:2016/A1:2017	INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 11:2015/A1:2016)
IEC 60364-4-44:2007+AMD1:2015 CSV	Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
EN 60909-0:2016	Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
EN 61000-6-4:2007/A1:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC GUIDE 104:2010	The preparation of safety publications and the use of basic safety publications and group safety publications
IEC TR 61000-3-7:2008	Electromagnetic compatibility (EMC) - Part 3-7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
EN 60865-1:2012	Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods
CFR 29(PT1910.1000 TO END) : 0	LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
EN ISO 6385:2016	ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
IEEE C95.1 : 2005	SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, 3 KHZ TO 300 GHZ
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 62311:2007	Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
EN 60071-1:2006/A1:2010	INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES
IEC 61000-3-3:2013 RLV	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
EN 61082-1:2015	Preparation of documents used in electrotechnology - Part 1: Rules
ISO 13857:2008	Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
IEC 62471:2006	Photobiological safety of lamps and lamp systems
EN 61786-1:2014	Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
EN ISO 12100:2010	Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
IEC 60398:2015	Installations for electroheating and electromagnetic processing - General performance test methods
IEC 61000-6-4:2006+AMD1:2010 CSV	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO 2631-1:1997	Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011	Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
EN 60204-11:2000/corrigendum:2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 11: REQUIREMENTS FOR HV EQUIPMENT FOR VOLTAGES ABOVE 1000 V A.C. OR 1500 V D.C. AND NOT EXCEEDING 36 KV
ISO 1999:2013	Acoustics Estimation of noise-induced hearing loss
ISO 13577-1:2016	Industrial furnaces and associated processing equipment Safety Part 1: General requirements
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
CISPR 11:2015 RLV	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
EN 61140:2016	Protection against electric shock - Common aspects for installation and equipment
ISO 13850:2015	Safety of machinery Emergency stop function Principles for design
EN 60335-1:2012/A13:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
ISO 5349-1:2001	Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEEE C95.6:2002	IEEE STANDARD FOR SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO ELECTROMAGNETIC FIELDS 0 TO 3 KHZ
IEC 61786-2:2014	Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements
EN 61010-1:2010	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV	Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
IEC 82079-1:2012	Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
IEC 60071-1:2006+AMD1:2010 CSV	Insulation co-ordination - Part 1: Definitions, principles and rules
EN 50413 : 2008 AMD 1 2013	BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ)
IEC TR 61000-3-6:2008	Electromagnetic compatibility (EMC) - Part 3-6: Limits - Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
EN 62471:2008	Photobiological safety of lamps and lamp systems
IEC 61010-1:2010+AMD1:2016 CSV	Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
IEC 60364-4-42:2010+AMD1:2014 CSV	Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
IEC TR 60479-5:2007	Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects
EN 61326-3-1:2017	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
IEC 60445:2017	Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
ISO 6385:2016	Ergonomics principles in the design of work systems
EN ISO 7010 : 2012 AMD 7 2017	GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - REGISTERED SAFETY SIGNS (ISO 7010:2011/AMD 7:2016)
IEC TS 60479-2:2007	Effects of current on human beings and livestock - Part 2: Special aspects
EN ISO 15265:2004	Ergonomics of the thermal environment - Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions (ISO 15265:2004)
IEC 61326-3-1:2017	Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
ISO 13577-4:2014	Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems
ISO 19353:2015	Safety of machinery Fire prevention and fire protection
IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV	Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 60990:2016	Methods of measurement of touch current and protective conductor current

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart